Logic Pro X: control surface "Scrub" no longer working

Hi everyone,
I'm a relatively new user of Logic Pro, and a very new user of Logic Pro X - I'm hoping someone can point me in the right direction!
I've been using DAW Remote HD (by EUM Labs) on an iPad 1 with Logic Pro 9, and found them to be a great combination.
Two weeks ago I upgraded to Logic Pro X, and I've found a problem which has been driving me crazy. Basically, the "Scrub" function using the Jog wheel in DAW Remote HD has stopped working. Using the jog wheel just to jog forwards and backwards works fine; however, when I hit the Jog / Scrub toggle, the "Play" button lights up, and then regardless of whether I try to scrub forwards or backwards the playhead just "jiggles" in place and nothing happens - no scrubbing.
Can anyone help? I'm guessing the control surface assignment has gone awry somewhere, but have *no clue* where to start. I've had a look at the Controller Assignments expert view in Logic Pro X, and had a read through the Control Surfaces documentation, but I'm all at sea. Is this a bug somewhere, or is this something I can "fix" myself?
Thanks in advance if anyone can help. I can't use the native Logic Remote as I only have an iPad 1, and am hoping I can get this important function working again on DAW Remote HD as it's pretty vital in my workflow.
All the best,
Sarah

Hi everyone,
I've been doing a bit more research into this and am wondering if it might actually be a bug. I've deleted my control surface config file, reinstalled the DAW Remote several times clean, both automatic and manual, and even tried it out with completely different control surface software on my iPad1.
In all cases the "scrub" function doesn't work properly - it stutters and "jiggles" and moves forwards randomly, and all the while the jog / scrub toggle enables the "PLAY" button (I'm not sure if this latter is intended functionality or not - I never noticed when it was working in Logic Pro 9).
Could it be that Logic Pro X is interpreting the scrub command(s) differently from Logic Pro 9, or even incorrectly? I don't know anywhere near enough about control surface commands to comment - just that the apps & functions were working with Logic Pro 9 and now aren't with Logic Pro X.
Would someone mind giving this a second check to see if it can be replicated? Basically use an iPad control surface app like DAW Remote HD, AC-7, LPTouch, etc, with Logic Pro X and try and get the "scrub" working on the jog wheel (jog works fine - it's scrub that's the issue).
I'm using an iPad 1 so don't have access to the Logic Remote, and it seems a bit expensive to upgrade the iPad to get access to a scrub wheel.
Thanks!
Sarah

Similar Messages

How do you delete a device in Logic Pro X Control Surfaces Setup?

How do you delete a device in Logic Pro X > Control Surfaces > Setup?

Go here:
http://help.apple.com/logicpro/mac/10/
Search on Bounce

Adobe Premiere Pro Help | Control surface support

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/control-surface-support.html

Adobe doesn't typically make public it's plans for future features. More often than not, we don't find out until just before release.
But you can let them know you want it.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with. Any solutions?

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with etc. Any solutions?

Hi
It shows just 4 always as an option in the "open with" lsit. Also I haven't downloaded any apps for a while so why would it start now?
Do you know how I can estabilsh how many apps are counting toward this 10 and what they are?

Facetime on MacBook Pro, Iphone and Ipad mini no longer works?

Facetime on MacBook Pro, Iphone and Ipad mini no longer works after years of working just fine. I get the message that I am connecting then it instantly just disconnects. Has worked fine for over two years with no issue until about a month ago?
I have investigated and tried things like re-setting apple ID and deleting the plist file etc, nothing works.
My Wife is having same problems in a different location so deffinatly not a problem with my wi-fi.
help, i use this alot!!!!

My Wife is having same problems
With the same iMessage account, or a different one?

Premiere Pro and control surfaces

Does Premiere Pro have support for control surfaces like the Mackie MCU Pro or the Avid Artist Control?
Thank you.

Support is new in CC, but I don't know which specific models are supported. You might try a Google search.

Logic Pro X amp builder plug in not working

I just downloaded Logic Pro X and Yosemite 10.10.2, was finally able to get a guitar sound but cannot get the amp designer, bass designer, or pedalboard to work or show up on my screen. Under Preferences, it says N.A. for all 3 plug ins. Any ideas? Thanks!

I think what you are doing is relying on the library of patches (which are combos of instruments and FX) and not the instruments themselves...
So try this..
1) Make sure you go to Logic's prefs and turn on all the Advanced Tools. Now LPX will be in LPX mode and not the cutdown/simplified 'Garageband Pro' mode
2) Start a new project and create a Software Instrument Track making sure the Open Library checkbox is unchecked...
3) Now click on the Instrument button in that track's channel strip.... and choose an instrument plugin from the list like EXS24 and then choose by clicking on the Select preset button in EXS24's interface... say the Vintage Strat for a basic sampled guitar
4) Now click on the Audio FX button in the channel strip and choose Amps and Pedals then Pedalboard to bring up the pedalboard FX plugin interface and choose what you want to use as pedals or pedalboard combinations...
Done!

Control+shift+u no longer working

Hi
I have a little problem with dreamweaver whereby Control+shift+u (which ftp uploads a file to the server) no longer works. It was working fine up till a couple of weeks ago. I had come to use it every time I uploaded a file so now it takes a lot more of my development time finding the file and uploading it with the 'put' command. When I do it now I get the following error;
<filname here> - error occurred - An FTP error occurred - cannot put online_proofs.php. Access denied. The file may not exist, or there could be a permission problem.
FTP Works fine using put... just not with the shortcut.
I am using Adobe Dreamweaver CS3 version 9.0
Does anyone know what might have happened and how to fix this?
Thanks
Luke

If DW starts playing up for no apparent reason, it could mean a corrupt personal configuration folder.
Close Dreamweaver, locate the personal configuration folder, and rename it.
When you restart Dreamweaver, it should create a new configuration folder with all the program defaults.
For details of how to find the configuration folder, see this page in the Dreamweaver FAQ.
Wouldn't hurt to try to see if it fixed the issue :-)

Control at ipod no longer works in car

This past Christmas I had an ipod adapter installed in my Hummer-3 (2006)
Everything was working fine.
With the most recent update (1.1.1), I am no longer able to control my ipod THRU THE IPOD.
I brought my car into the dealer that installed the ipod adapter, and they came to the conclusion that the software update to itunes & ipod is where the proboem is.
To fix this - I've tried going back to the older version in both itunes & ipod - but, without success. I get library version conflicts.
Please help Me !!!!!!!

Man, I'd really like to help you.
Although I never had, until now, to downgrade, I think the post below b y Sue Marsh, might help you doing it.
I’m still holding up to my 1.0.3, mainly because of my car interface, which I’m almost sure will stop working with 1.1, or 1.1.1 – call it a feeling – such are the messes created with these never-ending, never-working-properly-upgrades
Hope this will be of some help – the thread is long enough, so I cut for you what I think is the most relevant part
Good luck
http://discussions.apple.com/thread.jspa?messageID=6477896&#6477896
"Sue Marsh1
Re: Classic Firmware 1.1: What's new?
Posted: Jan 29, 2008 12:17 PM in response to: dragon21
The 1.1 upgrade is usually in this folder on a Windows PC; C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates. When you have found the 1.1 upgrade, follow the steps below; 1. Disconnect your iPod and close iTunes2. Remove the files for 1.1 (delete them, move them to another folder, whatever).3. Make sure you have both files for v1.0.3 in their proper location ie in the iPod software updates file (the one mentioned at the beginning of this message).4. Reopen iTunes and select Edit > Preferences. A dialogue screen headed "iTunes" will open. On the tab marked "General", click the box labelled "Check for updates automatically". (The check box should now be clear.) Click OK at the bottom of the screen to close the iTunes dialogue screen.5. Now connect your iPod.6. Click the "Restore" button7. Answer yes when asked if you want to install older firmware8. Let the update do its thingIf you find that you do not have v1.0.3 on your computer (see step 3 above), there is a website (mentioned earlier in this thread) where you can download it;http://rapidshare.com/files/73863240/1.0.3.zip.htmlI hope this helps. If not, post again for more help. Sue"
Message was edited by: Francis Mann
Message was edited by: Francis Mann

Scrubbing no longer works after updating to Yosemite

After updating to Yosemite yesterday and restarting this morning, I've noticed several problems. The biggest is that scrubbing in the timeline is very buggy, unresponsive, and sometimes doesn't work at all. I've tried turning it off and on, restarting FCP and my mac to no avail.
Also switching between tools via keyboard shortcuts and the playhead moving between edits have been sluggish as well. Library is stored on a thunderbolt connected RAID
FCP v 10.1.3 Yosemite v10.10 Mac Pro Processor: 3.5GHz 6-Core Intel Xeon E5 Ram: 16GB GPU: AMD FirePro D500

Permissions issues from the new account?
My impression, from my own experience and paying attention to other users' issues, is that 10.1.3 running on 10.10 is generally the fastest, most stable combination since the application was first introduced. This weekend I did a full days work on a couple of unfamiliar systems, new iMacs with shared storage, over two dozen projects, and I encountered no glitches whatsoever.
So that's why I was interested in your media drive and whether there might be something in your user account that the OS or FCP was struggling with.
Here is a kind of check list that Richard Taylor compiled. Why not go through it to see whether you discover a remedy.
Russ

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

Firefox installed & in Control Panel tho no longer works. Message: Your Firefox profile cannot be loaded. It may be missing or inaccessible. Help!

I tried to upgrade to Firefox 17.1 in Dec. 2012. When I did so, Ask.com took over the toolbar, search field, bookmarks, etc. I managed to get rid of it for a little while, but now it is back & since Firefox no longer recognizes my profile I cannot uninstall & reinstall it. Please help ~ thank you!

Try to delete the profiles.ini file to force Firefox to create a new default profile.
*http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Queuing from Premiere Pro to Adobe Media Encoder no longer working? CS6

Hi there,
Just very recently adobe media encoder has stopped accepting que's from premiere. I choose export in premiere, setup the export details and hit que, adobe media encoder launches, but then it flashes once (like disappears reappears, very quickly) and then it just simply does nothing. No item appears in the que. I have tried opening the premiere sequence directly from adobe media encoder but it does nothing either. If I drag the premiere project directly onto a preset in adobe media encoder, it crashes every time. (though not sure if it would of done this previous to my problem arising)
Anyway, very frustrating as I usually work on a different project whilst media encoder is rendering something out. Now i'm stuck with huge down times as I wait till the render is finished.
Recently updated to Mac OSX 10.8.3 - I think this is when the problem began.
Just updated the CUDA driver to 5.0.45 but this has not changed anything.
Working on a Mac Pro 5,1, 2x2.4Ghz 24GB RAM, EVGA GTX 660 FTW,

Some suggestions and answer at least the 16 questions at the end of the Wiki article.

Remote Control OK button no longer works for program information

We used to have a home media DVR and when watching a show I could hit the OK button to see it's information at the bottom. We just switched to a HD DVR instead of the Home Media DVR since we don't need it any longer. I was able to set it up w/out any issues, but now when I hit OK nothing happens. I played in the settings menu, but didnt see anything regarding this. Does anyone know how to set this up?
Thank you!
Sonya

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

Satellite Pro M - F5 Function Key no longer working

Hello all,
I have had many happy years using my Toshiba laptop without problem. The operating system is Vista Home Plus.
About a year ago, my son dropped the machine, which resulted in the display cracking. In order to keep using it I plugged in a spare mouse and keyboard, and linked it up to a flat bed monitor.
Using Fn+F5, it has worked perfectly as a defacto desktop for ages until relatively recently: the cable linking the laptop and the monitor became detached which resulted in the monitor going into sleep mode. When reattached, the display did not return and I have had persistent problems ever since. Using the F5 key now has no effect.
Points of note
- as the machine powers up, the external monitor displays the usual text, but when the Windows logo appears, it reverts to sleep mode and the laptop continues to boot up cleanly.
- when I boot up in safe mode the F5 key functions perfectly
- I have cured the proble previously by booting up in safe mode and restoring back to to a checkpoint taken a few days prior. This is a temporary fix, as whenever the machine is powered down it reoccurs. What is interesting though is that there always seems to have been a recent Windows Automatic update downloaded when I look at the list of recent system checkpoints and what triggered them!
Getting thoroughly fed up with the whole thing now. Any help very much appreciated.
CB

Hi
Its really not easy to say what the reason is for this problem but it would be interesting to know what notebook you have exactly.
Can you add this information, please?
Anyway, at the moment I would recommend to update the display driver and BIOS. Both you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Before you start the BIOS update close all running background programs, also your antivirus and firewall. You should be logged in as administrator.
Furthermore I would recommend removing the old display driver before you install the newest one. After removing restart the notebook and clean it using CCleaner. Restart again and install the newest version.
I hope this can solve your issue and by the way: Have you installed SP for Vista?

Logic Pro X: control surface "Scrub" no longer working

Similar Messages

Maybe you are looking for