Logic Pro X External Midi Recording

I am currently working on pulling some projects I have on my Korg Triton workstation onto Logic Pro X. I am having trouble triggering the midi sounds from the Triton to Logic automatically. I was only able to do this once, but I always have to manually hit record on Logic then attempt to time hitting play on the Triton to record my sounds. I've tried various ways of syncing the midi externally and internally to no avail. If anyone understands what I explained and can help it would be much appreciated.
Thanks,
JB

You mean record the MIDI data, MIDI is not sound.... recording the Triton (audio) "sound" is another thing all together.
The only way to sync them is to have Logic as the Master MIDI clock. (Look in Settings/Synchronization) Make sure Logic is sending MIDI clock to the right MIDI port and that sending clock is enabled.
Then in the Triton sequencer set it's clock to external... now when you press play on the Triton it should "Wait" for the MIDI clock start command sent when you hit "Record" in Logic.

Similar Messages

Logic Pro X External Instrument Recording Problem

Hi,
I am currently trying to record an external instument in logic pro x but coming across serious latency issues. I am just trying to figure out if the problems lies with my audio interface or the Daw?
I am currently using the Bass station 2 as my external instrument and the Scarlett 2i2 as my interface. My audio set up is below, can you point me in the direction as to where i might be going wrong?

Thanks for the reply.
Yes trying to record the Audio from my Bass station 2 in to my scarlett 2i2. Currently using Yosemite 10.10.1.
I have tried rebooting and reducing the buffer to 128 but still having the same problem. Ive also tried drawing notes manually in to the piano roll but its still out of sequence and quantize only seems to make it worse when played back.
Recording straight in to an audio track seems to work fine but recording in to an external instrument channel doesn't.
I have to a screen shot of the piano roll so you can get an idea how much its out of sequence, its difficult to explain.

Logic Pro &Tascam US 2000, record enable trks 1-12?

How do I get Logic Pro to recognise an external I/O device like the Tascam US200?
How do I get the Sound Preferences to "see" it?
Once it's seen, how can I enable multiple tracks in Logic Pro, so I can record my live drums ?

Did you install the appropriate driver(s) for the unit?
http://tascam.com/product/us-2000/downloads/
You should be able to assign any of the 16 inputs (not 14) to any Audio Channel Strip/Audio Track in Logic. Same for any of the 4 outputs.
If you use stereo Channel Strips/Audio Tracks, you should be able to record 8 stereo tracks simultaneously, or 16 mono tracks, or probably any combination of those, like 4 stereo and 8 mono tracks.
Yes, Logic is also designed for multi-track recording. Dûh. That is just an ignorant and nonsensical remark, probably born from frustration.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=2%26sec tion=5%26hash=apple_ref:doc:uid:TempBookID-ReplacedWhenAssociatingWithMessierRev ision-43984SET_SC_1002-1016046

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

External MIDI recorded as Audio is early

Why is it when I record MIDI data sent from Logic 8.02 to an external synth module and recorded back to Logic as audio is the audio earlier in time than the MIDI?
I played with various delay comp settings and this didn't seem to help.
Many thanks!
Alan Hayes

I have a new Apple dual quad core 2.8Ghz Mac,10 GB RAM, 2TB HD,Apogee Ensemble, Emagic Unitor 8 MKII(USB),Logic Pro 8.02,OSX.5.4.
I am not trying to slave a drum machine or anything else with a clock or any sync messages at all, I am just simply playing back a MIDI sequence from within Logic routed to an external MIDI synth module and recording it back into Logic as audio.
The audio recording is earlier than the MIDI Logic sent out.
This happens with all the MIDI external synths and drum machines I have treid not just this particular unit.
I played with buffer settings, no difference,I turned on and off plugin delay compensation,no difference,BTW this is with a brand new song not made from any template, only one audio track and only one MIDI track, I played with recording delay and got close with a delay of 118 and the audio on beat 1 would be late then on 2,3,4,5,6,7,8,9,10.......it would be early, then on bar 25,26 it was right on time and then it started to get later for every consecutive beat.
Since Apple removed the ability to sync to an external MIDI clock in version 8, now I have to send my clients a MIDI clock and record their data and send it back via MIDI to their workstations or drum machines and now it won't record in time?
I have worked with Logic since ATARI 1040STe back in the late 80s and it was always rock solid in the realm of MIDI from whence it came.
Is there a solution to this I have overlooked?

Logic Pro 9 crashing while recording

Hi all,
Been having serious issues with Logic 9 crashing, specifically while recording for a long period of time (30 mins continuous). I'm recording 3 audio tracks at most, at 44.1k/16bit. My computer has plenty of space available, 25 gigs at the start of record.
System specs:
MacBook
Processor 2.13 Ghz Intel Core 2 Duo
Memory 2 GB 800 Mhz DDR2 SDRAM
This computer should be able to handle this. Here is the crash log:
Any ideas?
Process:         Logic Pro [17027]
Path:            /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier:      com.apple.logic.pro
Version:         9.0.0 (1660.12)
Build Info:      Logic-16601200~2
Code Type:       X86 (Native)
Parent Process: launchd [109]
Date/Time:       2011-07-08 17:32:41.398 -0700
OS Version:      Mac OS X 10.6.2 (10C540)
Report Version: 6
Exception Type: EXC_BAD_INSTRUCTION (SIGABRT)
Exception Codes: 0x0000000000000001, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libSystem.B.dylib                       0x925c2732 __kill + 10
1   libSystem.B.dylib                       0x925c2724 kill$UNIX2003 + 32
2   libSystem.B.dylib                       0x9265598d raise + 26
3   libSystem.B.dylib                       0x9266b9d9 __abort + 124
4   libSystem.B.dylib                       0x9266ba55 abort_report_np + 0
5   com.apple.logic.pro                     0x003cefa4 0x1000 + 3989412
6   libSystem.B.dylib                       0x925c79bb _sigtramp + 43
7   ???                                     0x00000004 0 + 4
8   com.apple.CoreFoundation                0x908338db __CFRunLoopRun + 6523
9   com.apple.CoreFoundation                0x90831864 CFRunLoopRunSpecific + 452
10 com.apple.CoreFoundation                0x90831691 CFRunLoopRunInMode + 97
11 com.apple.HIToolbox                     0x953cff0c RunCurrentEventLoopInMode + 392
12 com.apple.HIToolbox                     0x953cfcc3 ReceiveNextEventCommon + 354
13 com.apple.HIToolbox                     0x953cfb48 BlockUntilNextEventMatchingListInMode + 81
14 com.apple.AppKit                        0x97ad3ac5 _DPSNextEvent + 847
15 com.apple.AppKit                        0x97ad3306 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
16 com.apple.AppKit                        0x97a9549f -[NSApplication run] + 821
17 com.apple.prokit                        0x010b4a01 NSProApplicationMain + 326
18 com.apple.logic.pro                     0x000039b6 0x1000 + 10678
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x925880ea kevent + 10
1   libSystem.B.dylib                       0x92588804 _dispatch_mgr_invoke + 215
2   libSystem.B.dylib                       0x92587cc3 _dispatch_queue_invoke + 163
3   libSystem.B.dylib                       0x92587a68 _dispatch_worker_thread2 + 234
4   libSystem.B.dylib                       0x925874f1 _pthread_wqthread + 390
5   libSystem.B.dylib                       0x92587336 start_wqthread + 30
Thread 2:
0   libSystem.B.dylib                       0x925618da mach_msg_trap + 10
1   libSystem.B.dylib                       0x92562047 mach_msg + 68
2   com.apple.CoreFoundation                0x9083277f __CFRunLoopRun + 2079
3   com.apple.CoreFoundation                0x90831864 CFRunLoopRunSpecific + 452
4   com.apple.CoreFoundation                0x908377a4 CFRunLoopRun + 84
5   com.apple.DVCPROHDMuxer                 0x407350fb AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 297
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 3:
0   libSystem.B.dylib                       0x92580856 select$DARWIN_EXTSN + 10
1   com.apple.CoreFoundation                0x90871ddd __CFSocketManager + 1085
2   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
3   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 4:
0   libSystem.B.dylib                       0x9256193a semaphore_timedwait_signal_trap + 10
1   libSystem.B.dylib                       0x9258f445 _pthread_cond_wait + 1066
2   libSystem.B.dylib                       0x925be028 pthread_cond_timedwait_relative_np + 47
3   ...ple.CoreServices.CarbonCore          0x917f1235 TSWaitOnConditionTimedRelative + 242
4   ...ple.CoreServices.CarbonCore          0x917f0f73 TSWaitOnSemaphoreCommon + 511
5   ...ple.CoreServices.CarbonCore          0x9181516b TimerThread + 97
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 5:
0   libSystem.B.dylib                       0x92561916 semaphore_wait_trap + 10
1   ...idesign.framework.digitrace          0x447a46b7 XThreads_RawEvent::Wait(unsigned long) + 39
2   ...idesign.framework.digitrace          0x447a7e61 CWriteBehinder::DoWriteBehind() + 47
3   ...idesign.framework.digitrace          0x447a7fab CWriteBehinderThread::StartWriteBehinder() + 21
4   ...idesign.framework.digitrace          0x447a8101 XThreads_RawThread::TaskEntryPoint(void*) + 19
5   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
6   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 6:
0   libSystem.B.dylib                       0x925618da mach_msg_trap + 10
1   libSystem.B.dylib                       0x92562047 mach_msg + 68
2   com.apple.CoreFoundation                0x9083277f __CFRunLoopRun + 2079
3   com.apple.CoreFoundation                0x90831864 CFRunLoopRunSpecific + 452
4   com.apple.CoreFoundation                0x908377a4 CFRunLoopRun + 84
5   com.digidesign.framework.DAE            0x43c08884 FicIsAlive + 800
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 7:
0   libSystem.B.dylib                       0x9256d86a ioctl + 10
1   ...n.framework.PlatformSupport          0x4463c957 CSyncPrim_Semaphore_DalImp::Acquire(unsigned long long) + 65
2   com.digidesign.framework.DAE            0x43ce2209 FWAudioCallback + 337919
3   com.digidesign.framework.DAE            0x43cc6290 FWAudioCallback + 223366
4   com.digidesign.framework.DAE            0x43ce245c FWAudioCallback + 338514
5   ...n.framework.PlatformSupport          0x4463cd74 CTask_Imp::MacOSXMasterThreadProc(void*) + 142
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 8:
0   libSystem.B.dylib                       0x9256d86a ioctl + 10
1   ...n.framework.PlatformSupport          0x4463c957 CSyncPrim_Semaphore_DalImp::Acquire(unsigned long long) + 65
2   ...n.framework.PlatformSupport          0x44645808 CSyncPrim_AutoResetEvent_Imp::Acquire(unsigned long long) + 42
3   com.digidesign.framework.DAE            0x43c86941 FicReportExternalEvent + 151064
4   ...gn.framework.CoreFoundation          0x441c9fac Sys_RawThreadTask::Run() + 36
5   ...gn.framework.CoreFoundation          0x441e7782 Sys_RawThread::ThreadIDsAreEqual(void*, void*) + 48
6   ...n.framework.PlatformSupport          0x4463cd5f CTask_Imp::MacOSXMasterThreadProc(void*) + 121
7   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
8   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 9:
0   libSystem.B.dylib                       0x9256d86a ioctl + 10
1   ...n.framework.PlatformSupport          0x4463c957 CSyncPrim_Semaphore_DalImp::Acquire(unsigned long long) + 65
2   com.digidesign.framework.DAE            0x43cb12ea FWAudioCallback + 137440
3   ...n.framework.PlatformSupport          0x4463cd5f CTask_Imp::MacOSXMasterThreadProc(void*) + 121
4   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
5   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 10:
0   libSystem.B.dylib                       0x9258f806 __semwait_signal + 10
1   libSystem.B.dylib                       0x9258f4c2 _pthread_cond_wait + 1191
2   libSystem.B.dylib                       0x92591158 pthread_cond_wait$UNIX2003 + 73
3   ...le.music.apps.MAAudioEngine          0x02b381ee GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 17454
4   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
5   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 11:
0   libSystem.B.dylib                       0x925618da mach_msg_trap + 10
1   libSystem.B.dylib                       0x92562047 mach_msg + 68
2   com.apple.audio.midi.CoreMIDI           0x013dbf31 XServerMachPort::ReceiveMessage(int&, void*, int&) + 155
3   com.apple.audio.midi.CoreMIDI           0x013fa8fe MIDIProcess::RunMIDIInThread() + 150
4   com.apple.audio.midi.CoreMIDI           0x013dd149 XThread::RunHelper(void*) + 17
5   com.apple.audio.midi.CoreMIDI           0x013dcb16 CAPThread::Entry(CAPThread*) + 96
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 12:
0   libSystem.B.dylib                       0x925618da mach_msg_trap + 10
1   libSystem.B.dylib                       0x92562047 mach_msg + 68
2   com.apple.CoreFoundation                0x9083277f __CFRunLoopRun + 2079
3   com.apple.CoreFoundation                0x90831864 CFRunLoopRunSpecific + 452
4   com.apple.CoreFoundation                0x908377a4 CFRunLoopRun + 84
5   com.apple.DesktopServices               0x960e963f TSystemNotificationTask::SystemNotificationTaskProc(void*) + 643
6   ...ple.CoreServices.CarbonCore          0x917d07ae PrivateMPEntryPoint + 68
7   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
8   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 13:
0   libSystem.B.dylib                       0x92587182 __workq_kernreturn + 10
1   libSystem.B.dylib                       0x92587718 _pthread_wqthread + 941
2   libSystem.B.dylib                       0x92587336 start_wqthread + 30
Thread 14:
0   libSystem.B.dylib                       0x92587182 __workq_kernreturn + 10
1   libSystem.B.dylib                       0x92587718 _pthread_wqthread + 941
2   libSystem.B.dylib                       0x92587336 start_wqthread + 30
Thread 15:
0   libSystem.B.dylib                       0x9258f806 __semwait_signal + 10
1   libSystem.B.dylib                       0x925bb441 nanosleep$UNIX2003 + 188
2   libSystem.B.dylib                       0x925bb37f usleep$UNIX2003 + 61
3   com.apple.AppKit                        0x97c3d1ed -[NSUIHeartBeat _heartBeatThread:] + 2039
4   com.apple.Foundation                    0x904808d8 -[NSThread main] + 45
5   com.apple.Foundation                    0x90480888 __NSThread__main__ + 1499
6   libSystem.B.dylib                       0x9258efbd _pthread_start + 345
7   libSystem.B.dylib                       0x9258ee42 thread_start + 34
Thread 16:
0   libSystem.B.dylib                       0x92587182 __workq_kernreturn + 10
1   libSystem.B.dylib                       0x92587718 _pthread_wqthread + 941
2   libSystem.B.dylib                       0x92587336 start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x9266b969 ecx: 0xbfffe45c edx: 0x925c2732
edi: 0x00000000 esi: 0x43961cb0 ebp: 0xbfffe478 esp: 0xbfffe45c
   ss: 0x0000001f efl: 0x00000286 eip: 0x925c2732   cs: 0x00000007
   ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000037
cr2: 0x02376000

Are you recording AIFF, WAV or CAF?
25 GB is not a lot of space, easpecially if that is on your system disk. You should KEEP at least 20 % of its capacity free, so unless your disk is 80 GB or smaller, it is too little. And since you only have 2 GB RAM, you'll need that free disk space (the less RAM, the more OS X needs free disk space to "offload" ongoing processes onto.)
Unfortunately, the crash report doesn't yield any direct clues as to why this happened (it's a 'generic' crash report). But I would urge you to record .caf files to an External FireWire disk, not AIFF or WAV to the internal.
from
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=14%26se ction=9%26tasks=true
There is a maximum recording size according to file type, as follows:
AIFF: The AIFF file format cannot handle audio file recordings larger than 2 GB:
For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 3 hours and 15 minutes.
For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 20 minutes.
WAVE (BWF): The WAVE file format cannot handle audio file recordings larger than 4 GB:
For 16-bit, 44.1 kHz stereo files, this equals a recording time of about 6 hours and 30 minutes.
For 24-bit, 96 kHz, 5.1 surround files, this equals a recording time of about 40 minutes.
CAF: If the size of your recording exceeds the above limits, choose the CAF (Apple Core Audio Format) file format, which can handle the following recording times:
The bit depth and channel format—mono, stereo, or surround—do not affect the maximum recording size of CAF files.[/quote]
About 13 hours and 30 minutes at 44.1 kHz
About 6 hours at 96 kHz
About 3 hours at 192 kHz

Logic Pro X won't record from USB or builtin audio devices

I have a M-Audio Fast Track and I've overcome the bugs regarding audio input and Mavericks by using a new mac and upgrading to Logic Pro X. Now I have a new issue which I think is unrelated.
I can hear the guitars in Logic Pro X when I turn the monitor on. The track shows input levels, my guitar plugins work. When I hit record I can record software instruments but when I try to record guitars or vocals nothing is ever recorded. I even unplugged the M-Audio Fast Track and tried the mic input on the mac and have gotten the same results.
Does anyone have any suggestions for this?

maskeda wrote:
I got it, some how it was a MIDI track and not an audio track.
"Some How"? as in: user error?

Is Logic Pro the Best Audio Recording Software for Mac?

Couple questions. I do a lot of audio production and work currently. I use a gateway with Cubase, and its not bad, but I feel like I need something mroe high end.
I'm looking at the 17 inch Imac. Does anyone record using this computer? How's it sound? Is there any way to put in a new soundcard or something if i don't like the current one?
Secondly, is logic pro the most advanced and best audio recording software for the mac? Are there others as well?
I know about Pro Tools, but it seems like there isn't anything high end enough that is TOO high end.
Does the Pro version have superior mixing capabilties. I am primarily going to be micing a guitar amp and having a mixer run into a firewire port, and also using a preamp for my guitar direct into the computers USB.
Lastly, how are the mixing features on Logic Pro vs. Logic Express? I do a lot of post production mixing as well, and use VST plugins. Speaking of that, will it accomodate using a drum program like BFD through VST or Midi like Cubase will?
Thanks for your time guys.

Couple questions. I do a lot of audio production and
work currently. I use a gateway with Cubase, and its
not bad, but I feel like I need something mroe high
end.
Yes, you do indeed need sth more high end.
I'm looking at the 17 inch Imac. Does anyone record
using this computer? How's it sound? Is there any way
to put in a new soundcard or something if i don't
like the current one?
It's not an iMac, but a faithful PowerBook G4 that I am using. Apples Core Audio is awesome. Your sound, however, will depend on your interface.
Secondly, is logic pro the most advanced and best
audio recording software for the mac? Are there
others as well?
That's why we are here, and that's why you ended up in this forum as well
To me personally, Logic sounds warmer and bigger than any ProTools system I've ever heard. From what yopu described as the work you need to do, there is no comparable application. Logic also offers you many more features above and beyond what you currently need to do.
I know about Pro Tools, but it seems like there isn't
anything high end enough that is TOO high end.
Everybody is using PT, and you should maybe get a Light Edition version of it. However, as stated above, Logic offers by far more possibilities.
Does the Pro version have superior mixing
capabilties. I am primarily going to be micing a
guitar amp and having a mixer run into a firewire
port, and also using a preamp for my guitar direct
into the computers USB.
For your purpose, Logic does have superior mixing capabilities. In my humble opinion, only the popularity of PT made it become the choice of studios and engineers, but things are turning...
Lastly, how are the mixing features on Logic Pro vs.
Logic Express? I do a lot of post production mixing
as well, and use VST plugins. Speaking of that, will
it accomodate using a drum program like BFD through
VST or Midi like Cubase will?
If you do post production mixing, forget about Logic Express altogether and go for Logic Pro. LP will accomodate tons of plug-ins, and it comes with a bunch of great one's as well!
The format for the plug-ins is called A(udio) U(nit) and works flawlessly. Many VST plug-ins are also available in AU format and the development of those is moving fast forward.
In other words, yes, you will be able to use BFD in Logic by means of the AU format.
Thanks for your time guys.
You're welcome.

Logic pro and external soundcard

Hello:)
Having problem with my recording device.
Can you tell me where and how can I set up all lines in and out?
I cannot find it anywhere.
I went to drivers/core audio but i cannot see anything like choosing chanels for recording.
regards, peter

here is the text from my other post:
Good morning,
I own sound card Edirol FA 101 and computer Apple Macbook Pro (Intel procesor, Mac os X 10.4.8, build 8n1037)
I have this problem:
when I plug in sound card everything is going fine and play sounds good. But I am not able to record any sound from my dj-mixer connected to FA 101 (line in 3.4 right and left channel:)
I even can not find set up in Logic pro 7 to choose from which channel I should record sound into computer.
I went to mac os utilities and chose Audio Midi Setup utility.
Setups are as follows:
Audio devices (i am not using any MIDI devices at the moment)
Default in put and out put (system output) : All Edirol Fa -101 (3171)
There are two tables bellow these settings. For audio in put and out put. Both are the same.
First column or line says Non-Interleaved device and it is grey - blind so there is no chance to change anything in this option.
Those are as follows:
Source: Default
Format 44 100 Hz 10ch-24bit
and than Chanel and volume slider with value of dB.
But I am able to set only Master Volume. The others are gray and blind (not available).
So I would like to ask how can I choose and unlock the other outputs and inputs as well and record samples in Logic (and other programs as well)
Thank you very much for your answer.
Kind regards, Poldauf Petr
[email protected]

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Logic Pro X: One MIDI note won't play

I am having a strange problem with Logic Pro X. I use a Yamaha CP33 as my main MIDI keyboard, connected by USB. In the past couple weeks, a strange problem has emerged - one of the notes from the keyboard, the B-2, to be specific, just doesn't trigger. At first I thought the key was broken, but it's okay, because:
- all keys work fine when I use the keyboard's analog audio output
- all keys work fine in MainStage
- the non-functional key moves up and down if I choose to transpose the notes on the keyboard.
So I have concluded that it's a software issue specific to Logic. I have already tried reinstalling the Yamaha USB MIDI driver, it didn't help. Could it be some obscure setting in Logic that is messing things up? What do you suggest can I do to fix this?

Hi
You may have set up LPX to use that MIDI note as an automation control, or as a keycommand
a) Go to Preferences;Controller Assignments & check there
b) Go to Preferences Key Commands and check there
Might be quicker to reset aboth?
CCT

Logic pro 9 "checking midi drivers" at startup

I recently switched from an imac running os x snow leopard to a newer one running lion. I use protools Le 8.0.4 with an avid mbox, gen 003. This combo always worked great under snow leopard. I installed it in lion and it also works like a charm, except i just bought logic pro 9 from app store, and it seems to get stuck in "checking midi drivers" at startup.
I looked at several previous posts and found the solution was to delete the old digidesign midi drivers from the library>audio>midi drivers folders, which i did and now logic is apparently working fine. Problem is, obviously protools doesn't work now. So it's either one or the other with this solution. There are 4 plugin files in this folder: digidesignfirewiremidi.plugin, avid mbox promidi.plugin, digidesignmbox2midi.plugin, digidiomididriver.plugin.
Am i going to have to keep deleting/restoring these files from the midi drivers folder whenever i wanna switch from logic to protools in the future?? Is it safe to keep doing this long term, or is there another solution i haven't found?
Also, does anyone out there know if it would be helpful to upgrade to protools 8.0.5? Or would i just be asking for more trouble?
Thanks in advance...

I recently switched from an imac running os x snow leopard to a newer one running lion. I use protools Le 8.0.4 with an avid mbox, gen 003. This combo always worked great under snow leopard. I installed it in lion and it also works like a charm, except i just bought logic pro 9 from app store, and it seems to get stuck in "checking midi drivers" at startup.
I looked at several previous posts and found the solution was to delete the old digidesign midi drivers from the library>audio>midi drivers folders, which i did and now logic is apparently working fine. Problem is, obviously protools doesn't work now. So it's either one or the other with this solution. There are 4 plugin files in this folder: digidesignfirewiremidi.plugin, avid mbox promidi.plugin, digidesignmbox2midi.plugin, digidiomididriver.plugin.
Am i going to have to keep deleting/restoring these files from the midi drivers folder whenever i wanna switch from logic to protools in the future?? Is it safe to keep doing this long term, or is there another solution i haven't found?
Also, does anyone out there know if it would be helpful to upgrade to protools 8.0.5? Or would i just be asking for more trouble?
Thanks in advance...

MBP Display flicks off while using Logic Pro and external monitor

Hi there
I have the MBP conected to my external 19" monitor. While running Logic Pro 7.2 the MBP will, for no apparent reason, turn its diplay off and logic will crash. The external monitor will still be on. And I can still move the mouse onto this monitor.
I then have to hold down the start button to force the machine to restart. This only started to happen after 3 months, but now it happens twice a week or so.
Anyone else experiencing similar problems?
Mbp Mac OS X (10.4.6)

You may want to check these threads to see if they match your problem
http://discussions.apple.com/thread.jspa?threadID=570540
http://discussions.apple.com/thread.jspa?threadID=539425
http://discussions.apple.com/thread.jspa?threadID=546601
Reverting to 10.4.6 solved my issues.

Logic Pro 7 - Audio Track record with Firewire In

System: Mac Book Pro. Logic 7.2.3 M-Audio Firewire 410. Aggregate device created = Firewire Multichannel (as input) & Built-In Output. (Built-in microphone turned off) Using condensor mike connected to F/W interface
SYMPTOM: No Audio being recorded to Audio Track. MIDI interfaces OK.
Any idea how to set Audio track to capture Firewire audio IN? (The set-up works properly with Garage Band)

Have you checked the Audio Input in the Channel Strip? What is it set to? Have you armed the Record button? ... say a bit more about your set up

Logic Pro and External Arpeggiators

OK, I've been scouring the usual places for answers, but now I come to the oracle(s).
I have an Oberheim Cyclone arpeggiator. It's old, cranky and a pia to use (and I have read the manual, numerous times).
I broke it out last night to give it one more shot with Logic 7.2.3 and actually had it kinda sorta working, then all **** broke loose. Here's the scoop.
I'm running an MTP and an MTP A/V networked and functioning beautifully. I plug the Cyclone into midi i/o 16 (the MTP) and set the clock to external... nada! No midi signal no sync. I did run a cable from the controller to the cyclone to a midi monitor to see if data passes thru and yes it does. I set the clock to internal and every midi light in the neighborhood starts glowing like Three Mile Island.
Question is: Can I cable the Cyclone from my controller in the Environment and just have it operate like the built in arp in Logic or do I need a more robust set up?
Thanks in advance

Cyclone bad! A new Arpeggiator is in order

Logic Pro X External Midi Recording

Similar Messages

Maybe you are looking for