Logic Pro X - External Video

External video (for example Firewire Video Output or Blackmagic Support) was broken in Logic 9 64bit, but working in 32bit. I assumed that it would be fixed in LX - but it appears to have been removed entirely. Is this correct? If so... then... hm. Not sure where I go, now.

Er hem. No it's not more flexible in a studio environment where you are outputting HD video to an external display via a Blackmagic decklink or Intenstiy etc. My second and third monitors are for other duties and aren't easy for the client to watch in any case.
Logic 9 (32bit) supported external solutions. So this is a giant leap backwards. As I mentioned, FCPX has an AV out option which should have been bolted onto Logic.

Similar Messages

Logic Pro DVD TRAINING VIDEO

Someone in the past posted a logic pro dvd training video that releaseds recently. I lost contact with the url. Anyone remember it off hand?

thank you. learned a lot from the sample video. Will be ordering the video. Tell me, how do I save my sequencing info, in case I have to re initialize my hard drive.

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Logic Pro X External Midi Recording

I am currently working on pulling some projects I have on my Korg Triton workstation onto Logic Pro X. I am having trouble triggering the midi sounds from the Triton to Logic automatically. I was only able to do this once, but I always have to manually hit record on Logic then attempt to time hitting play on the Triton to record my sounds. I've tried various ways of syncing the midi externally and internally to no avail. If anyone understands what I explained and can help it would be much appreciated.
Thanks,
JB

You mean record the MIDI data, MIDI is not sound.... recording the Triton (audio) "sound" is another thing all together.
The only way to sync them is to have Logic as the Master MIDI clock. (Look in Settings/Synchronization) Make sure Logic is sending MIDI clock to the right MIDI port and that sending clock is enabled.
Then in the Triton sequencer set it's clock to external... now when you press play on the Triton it should "Wait" for the MIDI clock start command sent when you hit "Record" in Logic.

Logic Pro X External Instrument Recording Problem

Hi,
I am currently trying to record an external instument in logic pro x but coming across serious latency issues. I am just trying to figure out if the problems lies with my audio interface or the Daw?
I am currently using the Bass station 2 as my external instrument and the Scarlett 2i2 as my interface. My audio set up is below, can you point me in the direction as to where i might be going wrong?

Thanks for the reply.
Yes trying to record the Audio from my Bass station 2 in to my scarlett 2i2. Currently using Yosemite 10.10.1.
I have tried rebooting and reducing the buffer to 128 but still having the same problem. Ive also tried drawing notes manually in to the piano roll but its still out of sequence and quantize only seems to make it worse when played back.
Recording straight in to an audio track seems to work fine but recording in to an external instrument channel doesn't.
I have to a screen shot of the piano roll so you can get an idea how much its out of sequence, its difficult to explain.

MBP Display flicks off while using Logic Pro and external monitor

Hi there
I have the MBP conected to my external 19" monitor. While running Logic Pro 7.2 the MBP will, for no apparent reason, turn its diplay off and logic will crash. The external monitor will still be on. And I can still move the mouse onto this monitor.
I then have to hold down the start button to force the machine to restart. This only started to happen after 3 months, but now it happens twice a week or so.
Anyone else experiencing similar problems?
Mbp Mac OS X (10.4.6)

You may want to check these threads to see if they match your problem
http://discussions.apple.com/thread.jspa?threadID=570540
http://discussions.apple.com/thread.jspa?threadID=539425
http://discussions.apple.com/thread.jspa?threadID=546601
Reverting to 10.4.6 solved my issues.

Logic pro and external soundcard

Hello:)
Having problem with my recording device.
Can you tell me where and how can I set up all lines in and out?
I cannot find it anywhere.
I went to drivers/core audio but i cannot see anything like choosing chanels for recording.
regards, peter

here is the text from my other post:
Good morning,
I own sound card Edirol FA 101 and computer Apple Macbook Pro (Intel procesor, Mac os X 10.4.8, build 8n1037)
I have this problem:
when I plug in sound card everything is going fine and play sounds good. But I am not able to record any sound from my dj-mixer connected to FA 101 (line in 3.4 right and left channel:)
I even can not find set up in Logic pro 7 to choose from which channel I should record sound into computer.
I went to mac os utilities and chose Audio Midi Setup utility.
Setups are as follows:
Audio devices (i am not using any MIDI devices at the moment)
Default in put and out put (system output) : All Edirol Fa -101 (3171)
There are two tables bellow these settings. For audio in put and out put. Both are the same.
First column or line says Non-Interleaved device and it is grey - blind so there is no chance to change anything in this option.
Those are as follows:
Source: Default
Format 44 100 Hz 10ch-24bit
and than Chanel and volume slider with value of dB.
But I am able to set only Master Volume. The others are gray and blind (not available).
So I would like to ask how can I choose and unlock the other outputs and inputs as well and record samples in Logic (and other programs as well)
Thank you very much for your answer.
Kind regards, Poldauf Petr
[email protected]

What's the best way to run Logic Pro from external hard drive.

What's the best way to run logic from external hard drive

Hi
Organism wrote:
Logic is designed to run from your Applications folder. I suspect if Logic was moved to an external drive, it might not be able to locate its assets, like loops and libraries.
As long the necessary files are in the correct places on the boot disc, you can run the Logic application itself fom wherever you like. It would not be recommended however, and there would be very little benefit (if any) in doing so.
CCT

Logic Pro and External Arpeggiators

OK, I've been scouring the usual places for answers, but now I come to the oracle(s).
I have an Oberheim Cyclone arpeggiator. It's old, cranky and a pia to use (and I have read the manual, numerous times).
I broke it out last night to give it one more shot with Logic 7.2.3 and actually had it kinda sorta working, then all **** broke loose. Here's the scoop.
I'm running an MTP and an MTP A/V networked and functioning beautifully. I plug the Cyclone into midi i/o 16 (the MTP) and set the clock to external... nada! No midi signal no sync. I did run a cable from the controller to the cyclone to a midi monitor to see if data passes thru and yes it does. I set the clock to internal and every midi light in the neighborhood starts glowing like Three Mile Island.
Question is: Can I cable the Cyclone from my controller in the Environment and just have it operate like the built in arp in Logic or do I need a more robust set up?
Thanks in advance

Cyclone bad! A new Arpeggiator is in order

Logic Pro X performance difference between iMac i7 3.5ghz (non-Retina) and the i7 4.0 ghz (Retina)?

Hello - on the verge of getting an iMac - it's for Logic Pro and some video editing with Premiere Pro (don't *really* need the Retina screen though) - i'd just like to get an idea of the performance difference (especially in Logic Pro X) between the quad i7 3.5ghz (non-retina) and the quad i7 4.0ghz (retina)?
I use loads of plugin instruments (incl. big Kontakt libraries) and effects with just a few audio tracks (only ever record max a couple of audio tracks at a time)
Thanks!

I owned the imac and then returned it for the 2.6 MacBook Pro. After using both there is a noticeable speed difference between the 2. Not a huge difference but there is certainly more lag using the MacBook Pro. I found that lots of the lag went away when I attached to an external display though. At the end of the day I think you just need to decide if you need the portability or not. At first I thought I would keep the imac and then get a cheap MacBook Pro to use on the road but the thought of having multiple Lightroom catalogs sounds very annoying to me. Plus all the transferring back and forth. I will say also that I've been getting a lot of freezes in Photoshop on my mbp and weird errors like the sleep wake failure error some people are talking about when connected to a USB device. I didn't have any of these problems with the imac

Conflict between Logic pro 7.2.2 and DIGI002 using a macbook pro

Hi.
I'm running Logic pro 7.2.2 on a macbook Pro using a DIGI002 rack as audio interface. I experience an extremely bad performance from my computer and keep getting these warnings: "conflict between Logic Pro and external device (digi002)" and the application runs VERY slow! I have updated all drivers but that hasn't helped! I practically can't use Logic at all, as it complaints when hardly running any tracks in a session. Has anybody experinced or heard of it before? It has really started to get on my nerves!!!!

Hi,
I am running Logic Pro with a Digi002 Rack.My driver versions are:
Digi Core Audio manager 7.1.1cs1
ProTools LE v7.1.1cs1 also the first Intel compatible version of ProToolsLE.
Logic Pro 7.2.2
All of this works,and I even use the Digi002 also to playback audio from iTunes,iMovieHD,iDVD,and Quicktime Pro,without any problems at all.
Are you able to run ProToolsLE well,or is it exhibiting the same problems?
Are you using the internal drive as a record drive,or do you have an external firewire drive for audio? This is important.I would recommend NEVER using the internal drive for recording audio,it can make the drive unusable after a while.
It would be good to know if you do have the latest drivers for the Digi002,and are able to run iTunes etc... If that is the case then going and removing all of Logic Pro preference files,and re-selecting the Digi002 interface as the audio hardware might do the trick.Also,check Audio Midi setup and make sure it sees the Digi002 correctly.
Lastly,and this suggestion no one seems to give...is simply this:check ALL your firewire cables,and if they look even a little frayed,replace them.Also,please put the Digi002 in the following order,if you are daisy chaining multiple firewire devices:
MacBook Pro
\Digi002 Rack
\\firewire hard drive(s)
\\\any external DVD/CDburners,ESPECIALLY if the manufacturer recommends this position for heir device.
\\\\any other external devices(cameras,printers,whatever)and have them OFF when running Logic or ProTools.
I hope some of this helps,
Cheers,
Nick

Logic Pro 9 Input distortion problem

Hey,
I'm having a lot of trouble with the inputs in logic pro 9 when recording an external instrument through my apogee duet 2.
Here's what happens:
I connect my apogee duet 2 to the mac, and connect my external instrument through the apogee into my mac.
I launch logic pro, create external instrument, set the midi, then click "input 1-2".
As soon as I click "input 1-2" I get this weird white noise/distortion dial up sound, but can still play the external synth even with the wierd distortion noise. But whenever I mute the track the whitenoise/ distortion stops.
I was hoping with all your knowledge invested in logic you would determine what the problem was.
thanks alot for your time.
hope you can help!
bennyb

Hey,
I'm having a lot of trouble with the inputs in logic pro 9 when recording an external instrument through my apogee duet 2.
Here's what happens:
I connect my apogee duet 2 to the mac, and connect my external instrument through the apogee into my mac.
I launch logic pro, create external instrument, set the midi, then click "input 1-2".
As soon as I click "input 1-2" I get this weird white noise/distortion dial up sound, but can still play the external synth even with the wierd distortion noise. But whenever I mute the track the whitenoise/ distortion stops.
I was hoping with all your knowledge invested in logic you would determine what the problem was.
thanks alot for your time.
hope you can help!
bennyb

Firewire video and Logic Pro 64bit

Does anyone know if and when firewire support on 64bit will be available? I just read it needs to be implemented in Quicktime 64 bit. When will that be? Quite a pity my firewire convertor is no longer available in Logic. Switching to 32 bit is not an option; I need the gigs of RAM.
thanks A

Just wanted to bump this thread up. Well is 2011 now, so we are still waiting for a solution for firewire video on 64 bit logic! C'mon Apple- we're waiting waiting waiting....
Apple, you are crippling the power users here - there is a (small) core community of folks buying your ultra high-hardware (for me a 5K 12core MPro) and using your pro apps, like Logic Pro. Until you give us this firewire solution we can't work with picture on external video monitors and take advantage of the extended memory addressing we need so desperately. One without the other is senseless, esp. when quicktime is such a CORE component of the operating system. PLEASE give us a 64 bit quicktime--- PLEASE PLEASE PLEASE - we promise we'll keep buying iphones, ipads,etc. too.
It seems so crazy we've bought a 64 bit computer, a 64 bit operating system, and a 64 bit App., yet an essential core system component of high end audio visual computing work is still not yet supported. Shame on you- the ball has been officially dropped here. I think I'll email Steve Jobs and see if I get a response... ya never know.

HT3413 can I connect my new 15" macbook pro to 2 external video monitors?

can I connect my new 15" macbook pro to 2 external video monitors?

Not without an adaptor such as those from Matrox.

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Shadow30 wrote:
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
• Only if your video camera supports it. Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
• Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
• If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac. For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
• The retailer who sold you your video camera may have other suggestions.
• If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
Message was edited by: EZ Jim
Mac OSX 10.9.4

Logic Pro X - External Video

Similar Messages

Maybe you are looking for