Logic Pro X is not working with nanoPAD2

Hello,
I bought the nanopad2, I am using it with Logic Pro X and I am having some strange situation, basically Logic is not respecting the changes that I do in the Korg Kontrol Editor, for example if I set in the Kontrol Editor that the first pad is D1 note when I press that pad Logic interprets that the note is A#1.
I thought that maybe the problem was the device but I have tested it in Reaper and it works perfectly.

Hi Guys, thanks but I have found the solution. Basically the issue was due a wrong configuration on Logic, in order to set up for use it with nanoPAD2 you have to go to: Logic Pro X -> Preferences -> Display -> Display Middle C as: G4 (Roland).
And it is all, the issue was fixed.
Thanks for your help!!

Similar Messages

  • Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

    The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
    Opening the dictation system preference panel makes the system preferences crash...
    The mic of that camera is the only mic I have.
    I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
    Anyone having the same issue?
    I hope this is gonna be fixed with 10.8.1.

    Hello, thank you for responding.
    Unplug and plug in back the camera does not solve this problem. I tried that before.
    But what worked was to start photo booth. Don't really know why.
    So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

  • HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

    Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
    HP Color LaserJet Pro MFP M177fw) is not working with this OS.
    Give me a urgent solution

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

    I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10.  The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage.   Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
    After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip.    Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes.   I figured I would try ingest the footage with Prelude and am running into the same problems.   Scrubbing does not work, only the first few seconds from a clip are available.     When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors.   I already spent several hours trying to figure this out.   In the meantime, I finished the project using Final Cut Pro X :-\
    Any help would be appreciated.
    Thank you,
    Niels.

    Any chance this gets fixed soon?  I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio.  I've also noticed the video jumps around even when it does have audio.  Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually.  I've also tried just dropping the file structure from the card straight to the hard drive.  It's a huge problem, and is keeping me from making the switch fully from FCP 7. 

  • Pro Tools 10 not working with 10.7.5 HELP!

    My reading suggests that Pro Tools 10 will work with 10.7.4 . My mid 2012 macbook pro came with 10.7.5 and it looks like trying to roll back to 10.7.4 will crate other issues with Safari, iphoto, etc. I tried to install the late 2012 10.7.5 update which fixes some programs not launching, but I get an error mesage saying that my harddrive does not meet the requirements. Huh? It's a 750 g standard isue partitioned to use boot camp as well.
    I'm desperate. I need my recording studio to work!! HELP!

    That is because your Mac came with a special build of Lion made just for the newest models, it contains the correct driver set for the newer hardware in the new models. You may have to do a complete reinstall over the top of your current install from the Online Internet Recovery system, IE Not the Recovery HD partition on the internal drive, to get the correct 10.7.5 build for your model.
    As to Pro Tools 10 working on Lion 10.7.5 you would need to contact Pro Tools and ask them.

  • Why does the logic pro 9 upgrade not work on OS X 10.8.4 ?

    Just decided to upgrade to logic 9 from my 8 (an upgrade from 6!) but I also have Protools on my computer (dont hate). Tools 11 needs 10.8.4 but the logic 9 update refuses to work with 10.8.4 ...BTW pro 8 is still working well on my system, but 9 has some additional cool featurs etc
    Additionally an upate to Logic X loses all my 32bit plugins so...I am  staying with 8/9 for a while ..any help to get 9 functional??

    It is the installer that's quitting, or Logic Pro when you try to launch it? If the latter, download all the available updates, either through Software Update or the standalone downloaders;
    http://support.apple.com/downloads/#logic%20pro%209
    and apply them before attempting to launch Logic. That might work better.
    Regards.

  • HT202415 Does Logic pro 9.1.8 work with yosemite?

    I installed from retail disks on new internal ssd.

    Hi,
    I'm not the best one to help with this as I've used the same installation for a long time and always loaded the operating system in new.
    Is the external drive a boot drive with the operation system on it? If so you can copy the Logic "Preferences" file from the external installation to the Yosemite installation.
    It's located in the     Users/YourName/Library/Preferences folder, the name is com.apple.logic.pro.plist
    This is a different Library/Preferences that is located in the root position of your drive.
    If you had a default project you started up with each time you can copy it over as well, it will usually be located here.
    Users/YourName/Music/Logic
    These are correct if your external drive is a boot drive and has a Logic install on it.... the files need to be copied to the same location on the Yosemite install.
    Have a gig, heading out, someone will jump in I'm sure.

  • Re-entering serial number for Logic Pro 8 is NOT WORKING.

    I purchased Logic Pro 8 when I bought my MacBookPro in 2008. Two weeks ago the main logic board had to be replaced. Logic Pro 8 then wanted me to re-enter my serial number. I re-entered it, but am getting "serial number is not valid." What the **** do I do now?
    Thanks in advance to anyone with a hint...
    <Edited by Host>

    Thanks for the tip, the trick is now going to be contacting Apple. They don't seem too eager to provide phone numbers without having me throw them MO MONEY. After the hassle and expense with the main logic board, I'd like to be able to get my legally purchased software running again. Will let you know how it goes, meanwhile thanks for the quick answer

  • Adobe Connect Pro 8 Plugin not working with Moodle 2.0

    Hello, Last year we integrated Adobe Connect Pro into our installation of Moodle 2.0. On Friday our Adobe Connect Pro account was upgraded to 8 so we installed the new plugin and now it does not work in Moodle.
    Is there any news on why the plugin is broken and when it will be fixed? We use Adobe Connect Pro several times a week so we need it working ASAP.

    As mentioned on the main product page ( http://www.adobe.com/education/products/adobeconnect.html  ), many of the integrations with LMS systems like Moodle are developed entirely by Adobe partners. In the case of Moodle, here is the partner that created the integration. They will be responsible for any updates.
    See the list of LMS solutions here and links to their creators here:  http://remote-learner.net/adobeconnectpro

  • Acrobat Pro 9 (nine) not working with Office 365 subscription edition.

    Hello all,
    I have a new subscription and new download of Office 365. The product is buggy generally and makes really frustrating changes to links to other programs that are sometimes difficult to figure out.
    Specifically, Word 2013 will not communicate with Acrobat Pro 9
    I have tried creating a PDF from Word via Print to PDF but that makes both programs hang; I have tried saving the Word doc, opening AAP and using "Create PDF" from Pro, but this also makes both programs hang.
    I was able to create ONE PDF via the Print To option, but since then, both applications hang every time. Super frustrating.
    Anyone have this problem, and, more importantly, a solution?
    Thanks.

    Hi Julie ,
    It seems to be a compatibility issue .
    Please refer to the following link for the same .
    https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
    Try Updating it to the latest version.
    Launch Acrobat>Navigate to Help>Check for Updates
    See if that helps.
    Regards
    Sukrit Dhingra

  • Mac book pro Retina is not working with vga adapter to video projector

    I want to connet to video projectors, With vga adapter i can't connect to the video projector and also my mouse will not work properly, it becomes very slow and I can't work it. With dvi adapter combined with vga, the mouse is fine, but I can't connect to the video projector. Mirroring is my setting. I have tried several video projectors. What shall I do?

    Adjust the volume control located in the lower left corner of the YouTube Video Player.

  • After upgrading to Lion Logic Pro 9 is not working right

    I have no idea what is going on, I was working on a project this evening, did a bunch of work as a matter of fact, I always hit save after every litte bit of work I do, it's a force of habit now.
    When I go to re-open my project I get some kind of error message that Logic can't open my file. I close out of that and open project again, this time it opens but it was the project before all the work that I had recently done. Anybody have any idea what could have happened and how can I possibly restore the work that I had done.
    Even since I upgraded to Lion, Logic has not been working the same, everything time I open it, it opens 2 instances of the project I'm working on, what is that about?

    There are apparently a lot of problems with Logic 9 and Lion. A lot of Logic users don't go to a new system at least for several months after it comes out, or until the X.1 version comes out. I go to this site a lot for help with Logic.
    www.logicprohelp.com
    They are very knowledgeable and helpful. I've seen quite a few threads about Lion, but haven't read many of them, since I'm staying away for a while.

  • Final cut pro HD 2 not working with new updates

    recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

    MichelPM wrote:
    ... or you maybe able to run your version of Final Cut under virtualization software.
    I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
    However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test.  It failed!
    Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
    I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed.  However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

  • Logic 9.0.0 NOT WORKING with mountain lion update

    Hey guys,
    I was running on snow leopard 10.6.8 prior to this evening and I had logic 9.0.0. I didn't get it from the appstore, though. When I try to open logic it shows the following message:
    I really need to have logic working.  I did do a back up with time machine before I downloaded the update for mountain lion, so it was running on snow leopard and logic was working fine when I backed everything up. But i'd rather not downgrade since I already spent the time and money to upgrade it would just be another hassle, and since this is the first time I've upgraded my mac I don't know how I would upgrade again once I downgraded.
    The most favorable solution would be if I could keep mountain lion but have logic 9 still working. please HELP thanks!

    If you or, any one else is having the same problem, I had the same. It transpired that I hadn't installed Logic in to my applications folder, so I transfered my version of Logic to the aplications folder, downloaded the update from apples website (google it) and I was away.

  • Yoga tablet 2 pro microphone does not work with Skype or Google+ hangout

    I have a new yoga tablet 2 pro, with most recent build and most recent version of skype for android.
    When using skype or hangout, the other party cannot hear me (unless I speak directly into built-in microphone hole from a few inches away).  The mike works fine with OK google, etc.  Skype and hangout also work well with earphone and external mike combo. 
    I think there is a problem with apps accessing microphone gain.......  is there a fix?
    thanks! 

    In order to assist my investigation into these reports, if you are still experiencing this issue could you please provide:
    the model number
    If the model is wifi/3G/LTE
    the OTA your device is running
    Thank you,
    Amy Tupper
    Technical Resolution Lead, Pervasive Issues
    Lenovo US
    ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
    First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

Maybe you are looking for