Logic Pro X Notation for whole bar note makes unwanted ties

For some reason, one bar of my score, which is a single chord sustained for the full bar, is notating as a dotted quarter-note tied to a sixteenth=note tied to another sixteenth-note tied to a half note. The previous bar is identical, but notates as a whole note.
I've deleted the notes, and I get rests of the same values. Why is Logic chopping the bar up like this? How do I make it notate a whole note?
Any help much appreciated. It's driving me crazy!
Robert

OK, Thanks.
I've already posted the notation. Here's the Piano Roll.
As I said above, I deleted the notes and the rests were then notated the same tied values instead of being a full bar rest.
I copied and paste the notes from bar 35 (notated as whole notes) to bar 36 ... and they notate with ties.
Robert

Similar Messages

Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?

I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
So far so good.
But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
Any help would be greatly appreciated.

I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.

Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app. HELP!

grrrrr, this is so frustrating!
Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app. Any ideas?

To prevent cheating, the updater checks the receipts
first — receipts files look like regular package
files, but they're actually a list of pointers to the
files installed from that package, together with
their attributes: location, checksums, owner,
permissions, and so on... That's how the repair
permissions function works.
If you messed with your receipts folder, you may be
out of luck: in this case, re-installing everything
will rebuild the receipts and the updating
should take place.
Yet another option would be to use Pacifist:
http://www.charlessoft.com/
• it allows the user to create receipts for [.pkg]
packages
• it can be used to force installation of any file
from a given package
Be aware that Pacifist doesn't run any of the
pre-install, post-install, pre-upgrade, or
post-upgrade scripts, doesn't check already existing
receipts, and doesn't alter the permissions
afterwards, so you'd better know what you're doing...
nice illustration on the repair permissions....

Logic Pro X - Only drum machines do not respond on MIDI controller

98% of the time, when I load a drum machine, only a few of the keys on my MIDI controller will respond with sounds. If I switch to any other instrument patch, all keys work perfectly, but when I switch back, it's still spotty. I've disconnected and reconnected, restarted Logic, restarted the computer, and opened new sessions. Anyone have any advice?

Ahh.. ok, it was hard to tell from your original post.
When loaded are you seeing any notifications that samples are missing?
Could possibly by Logic/controller related. (Is this Logic-X?)
Try deleting Logic's preferences:
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
be sure to delete both files.

TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
Have a nice day!

How can i know my logic pro 9 is for 3 install's?

how can i know my logic pro 9 is for 3 install's?

Logic Pro 9 (the DVD version) can be installed on a notebook and a desktop (2). The Mac App Store products can be installed on all Macs that you own. If you need a volume license (e.g. for a school) you should contact Apple.

When i try to open my projekt in logic pro x it say audio files not found?

when i try to open up a projekt in logic pro x it say audio files not found why is this heppends?

This error typically means the audio files you used in this project are no longer found in their original location.. (did you move or delete them?) or you have renamed the audio files..... or they were located on an external HD etcand that drive or disk is no longer available.... because its not plugged in.

I was working on numerous songs in Logic Pro 9, and for some reason 2 of the songs would not bounce. I get an error message: Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number

I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
"Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
Thanks,
Johnny

Fixed! Ran disk utilities and repaired my external HD.

How do you get the piano roll on logic pro x to show 1/64th notes?

On the piano roll in Logic Pro X the grid only shows like 1/16 notes. I want to be able to zoom in and have the grid at 1/64 notes.

Transport is at the top center of the Logic window. If you click on the "/16" which I circled in red, you will get a drop down menu to change the the note length you want.
Your transport may look different and might not have the "/16" right now. I have a custom transport displayed. "Custom" can be selected by clicking the "gear" icon on the left of the transport. Various options for what to display in the transport can be accessed by right-clicking in the transport bar and selecting "customize transport and display." The option you are looking for will be in the "LCD" section - choose "custom" and check the box for "signature division."

Logic Pro Environment Templates for Various Ensembles

I'm an old salt that started composing digitally only last year - always composed for live performance prior to this. Been tweaking VSL for eight months trying to find the right combination of Logic Pro plug-ins and settings on those plug-ins for a traditional romantic symphony ensemble (a typical Dvorak or Maller symphony instrumentation - not much different than a lot of modern movie instrumentations.) I've played in and been around highest level orchestras most of my life and am very frustrated trying to find the right combination of plug-ins to create realistic sound, not get clipped all the time when all instruments are playing forte passages, etc.
Are there any Environment templates anyone has produced with a set of plug-ins in place? Maybe this sounds sacreligious to some, but if I could get my hands on 10-15 templates of Environment setups people have used successfuly (romantic symphony, classical symphony, string quartet, chamber orchestra, woodwind quintet, movie scoring instrumentation, etc.), I feel like this would save me a few years of failing my way to success digitally.
Sure there are lots of variables that would require me to tweak things endlessaly, but at least I'd be doing it from a base template that has proven to work for at least one person with at least one set of variables with one specific ensemble, as opposed to the endless stream of things I've been trying with no base reference at all.
Help?

FYI - I'll even take just one template . Anything to give me reference point for doing my own thing. One way to do this would be to strip out all the track information itself and just email me the naked file with no music in it but the with environment still in place. I would be willing to pay if that's what it takes to get there.
FYI - I'm using Vienns Symphonic Library exclusively right now, but would still be glad to get my hands on some Environments set up for other libraries. Thanks.

Logic Pro 9 - MOTU MK II inputs not available in channel strip

I usually use a MOTU 24 i/o as my main Logic Pro 9.1.5 audio interface. I'm trying to use a MOTU MK II and it is connected via firewire. It shows up fine in the Logic > Audio > core audio driver preference and is checked on. However the MKII in/outs are not available on Logic's channel strip inputs and outputs. Logic still shows the 24 i/o's even though the 24 i/o is not selected in audio preferences and is not even turned on.
I've reinstalled the latest MOTU drivers, trashed Logic's preferences and restarted my MacPro but it is still the same. Only the 24 i/o available in the channel strip input and output.
Is there a second audio i/o setting that I'm missing?
My Mic is registering OK in the MKII so I know it is getting a signal.
Thanks,
Richard

For some reason Logic is listing the 24 i/o inputs.
I've renamed the 828 Mk2 1 & 2 inputs to Vox 1 and Vox 2. The MK2 has 8 analog inputs plus two mic/line inputs for a total of ten audio inputs, not 14 as listed in the channel strip input drop down.
Audio registers in and out of the Mk2 but does not register in Logic's channel strip input. I just switched back to the 24 i/o to test and audio registers fine in Logic's channel strip input with the 24 i/o. Just not with the MK2 selected as the audio source.
I'm curious if anyone else has had this problem or if I'm missing an audio input setting somewhere.
Thanks,
Richard

Logic Pro 9 asking for original serial number

Hi
Having Logic authorization problems.
I just bought a new macbook pro. I cloned the harddrive my old macbook (running Logic 9 in OSX Lion) and then cloned to the new macbook pro.
Whn I try to open Logic Pro 9 - it asks for a serial number. When I enter the serial number from my old laptop
Logic asks for the "previous serial number or my XS key". I never had a XS key - Logic 8 was my first version.
I guess I'll to dig up my old Logic 8 installation guide (who knows where it is these days?)
Why won't the serial number form my macbook work on my new macbook pro?
Any help is much appreciated
thanks

It is Recommended to do a Complete ReInstall from Original Discs when using Pro Apps and not to Migrate them...
If your Logic 9 was an Upgrade from Logic 8 you will need the Serial Numbers for Both 8 & 9...
I would suggest you delete the current version of Logic 9 on your MBP and Reinstall from the Logic 9 Discs...
Then Run Software Update or go Here...
http://support.apple.com/kb/dl1014
to download the Latest Update of Logic for Lion.
I would also recommend doing a Permissions Repair and a Restart after deleting the Migrated Logic 9 and after the Reinstall from Discs...
It may seem like a lot of work... But the Results will be well worth it...
Cheers,

Logic Pro 8 and PT 7.4 not compatible ...

PT 7.4 is out.
Having Logic 8 on a MAC PRO as a front end for PTHD was supposed to happen with PT 7.4 release.
I downloaded it ($79) trying last night to set Logic 8 in the preference. First I set up the Core audio to my 96i I/o, then selected "DAE". then I Had an error -1133 return by the DAE driver.
I never used Logic with PTHD. Because I have an Intel Mac. SO I guess it is either I dont know what i am doing (Which it wont be the first time) or PT 7.4 is not yet compatible with Logic Pro 8 on intel Mac.
which is what probably the case. I read everything I could on the Digi site, there is nothing at all about Logic Pro 8. One deception down, I dont have to worry about this.
Eric d

Hi,
I am the original one who posted this but, After hours of nothing but frustration
I have the DAE/DTDM working within Logic 8 And PTHD 7.4. (I have a 96i I/O)
If you are intrested in what I did to make it wok this is it:
In Preference>Audio
1. Disable Core Audio
2. Enable DAE Click on TDM Setup Indicator, I choose 24 Bit, and 48 Tracks (3DSPs). You can click on "Digidesign Hardware Set up" if you want to change something But I did'nt
3. Enable Direct TDM and Universal Track Mode.
Limitation and advantages of running Logic 8 as a front end to PTHD: There are two types of tracks - DAE tracks which uses TDM plugins and Direct TDM tracks with are Audio OR Software Instruments they run All Logic 8 Plugins including Sof Instr. You Can also Use a Node on them (I Works). The problem is you Only have * TDM Device channels. Routed as ESB Mono 1 thru 8 or stereo ESB 1-2 thru 7-8. You have to route the Output of the TDM Device track (ESB 1...8) to an Aux track Input 9ESB 1...8), the Logic effectS are in the TDM Device tracks and Prottols TDM plug ins are in the corresponding Aux tracks
Unortunately All Channel Stereo channel are Double Mono which takes more real estate. When Playing a double Mono the even number could be changed to stereo and it work well as such but you cannot get rid of the other Mono track it has to be next to the stereo track.
When creating tracks in DAE you cannot choose stereo, but one selected you can change it in the arrange to stereo.
I hope this help.
Good luck
Eric D

Logic Pro X amp builder plug in not working

I just downloaded Logic Pro X and Yosemite 10.10.2, was finally able to get a guitar sound but cannot get the amp designer, bass designer, or pedalboard to work or show up on my screen. Under Preferences, it says N.A. for all 3 plug ins. Any ideas? Thanks!

I think what you are doing is relying on the library of patches (which are combos of instruments and FX) and not the instruments themselves...
So try this..
1) Make sure you go to Logic's prefs and turn on all the Advanced Tools. Now LPX will be in LPX mode and not the cutdown/simplified 'Garageband Pro' mode
2) Start a new project and create a Software Instrument Track making sure the Open Library checkbox is unchecked...
3) Now click on the Instrument button in that track's channel strip.... and choose an instrument plugin from the list like EXS24 and then choose by clicking on the Select preset button in EXS24's interface... say the Vintage Strat for a basic sampled guitar
4) Now click on the Audio FX button in the channel strip and choose Amps and Pedals then Pedalboard to bring up the pedalboard FX plugin interface and choose what you want to use as pedals or pedalboard combinations...
Done!

Would apple ever consider putting Logic Pro 9 up for sale again?

Of course Logic Pro X knocked Logic Pro 9 off the app store a few years ago. I really want to use Logic Pro 9 for music projects, but cannot buy it anywhere (I haven't purchased it before). I've seen a considerable amount of hate towards Logic Pro X and personally do not prefer it. Would apple ever consider re-releasing Logic Pro 9 if the demand for it was great enough?

Go to this site:
Apple Product Feedback
"Apple strives to bring the best personal computing experience to students, educators, creative professionals and consumers around the world through its innovative hardware, software and Internet offerings. Apple welcomes your feedback on its products. Begin by selecting a product below."
http://www.apple.com/feedback/
So select a product
http://www.apple.com/feedback/logic-pro.html
Select appropriate feedback and give them your best recommendations.

Logic Pro X Notation for whole bar note makes unwanted ties

Similar Messages

Maybe you are looking for