Logic Pro X Problem please Help!
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
nenikos1 wrote:
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
A known problem with the latest Apple updates.
It's all over this forum, take a look around.
Similar Messages
-
Very Strange Logic Studio Installing Problem, please help !
Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lotit is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010 -
Acrobat Pro 9 problems - please help
Hello there from Victoria, Canada
We are a small group of teachers that produce monthly current events teaching units for Canadian schools.
Some of our our customers receive the newsletter by mail, and the rest download pdf files from our website. The pdf files are password protected and we notify our subscribers by email what the password is.
We have never had never experienced any major issues, until now. We recently upgraded to Acrobat Pro version 9 (from 8) and many, many subscribers have been contacting us claiming that they cant open the password protected files even though they are using Adobe Reader 9. When I create the pdf file, the settting I use is open with Reader 5 and above.
Many of our customers are very frustrated and so are we. Can anyone please help ???? Is anyone else experiencing problems and what can we do to solve this?
Thanks in advance for your time.
Eric W.Hi Eric,
The file will never open in Mac Preview because Preview doesn't know how to decrypt it. The reason Preview thinks that the file is corrupt because it is encountering the encrypted data which appears to Preview to be junk. Only an application that has PDF decryption capabilities (e.g. Adobe Reader or Acrobat) will be able to open the file.
As an aside, the file is in Acrobat 7.0 and later format (i.e. it uses the PDF-1.6 file structure) and although the encryption algorithm is one that Acrobat 5 understands (128-bit RC4) there are other elements in the file that cannot be displayed in Acrobat 6.x and earlier. Although Michael noted above that he was able to open the file in versions 5 and 6, the display would have been degraded.
Assuming that the persons having trouble opening the file are not using Preview, but are indeed using Reader 9.0, are there any alert dialogs that come up when they try to open the file? And as Phil asked above, what system (OS and language) are they on?
Also, because the Open Password edit box doesn't display until the entire file has been downloaded, it is possible that on slower systems that it appears that the file won't open.
Thanks,
Steve Madwin
Acrobat QA Engineer -
Logic pro download issues PLEASE HELP!!!!!
I just downloaded logic pro and it asked me to download extra content...i passed up on it by mistake and can't figure out how to access it again to download?? Please help!!!
Simple...
Start Logic
Go to Logic's Menu Bar at the top of the screen.
Click on Logic Pro in the bar
Click on "Download Additional Content"
Select what content you wish to install (I'd install it all...)
Wait a while (depending on how fast or slow your internet connection is..)
Done! -
Windows 8 Pro - iTunes problems, please help!
Since I have installed Windows 8 Pro 32 bit, itunes has not worked at all? I keep getting error messages when installing and the it says I need to verifiy I have privilages to use 'Apple Moblie Device Support' I've tired run as admin. please help!
hello, i have a HP computer a pavillion g6 with a GPU Ati Radeon 6470M and windows 10 as operating system i tryed every single roubleshooting web site that speaks about this issue for now. in my opinion windows 10 isn't made for this kind of Graphic cards (by that i mean ATI mobility graphic cards)... for now !!!. a lot of people offer alternative solutions to the driver provided by the official AMD website, try this web site "http://leshcatlabs.net/". may be it'll work. but they didn't work for me, try them may be they could work for you if u happen to try windows 10. the thing is and my question is : Will there ever be any fix from HP (or microsoft, or AMD) for this issue ?. because it's not worth to wait if i will never use my graphic card on windows 10... i'm seriously thinking about downgrading back to windows 7 where every thing was stable over this issue. it's a temporary solution, but at least i can use my GPU. thx for answering, let's hope we all find a solution soon.
-
Logic Pro 9 update - PLEASE HELP!
Hi.
I upgraded my computers to the newest Mac Pro which have Mavericks.
I have problem with Logic Pro - it has strange black lines, which makes it difficult to work.
I wanted to update my Logic Pro (version 9.1.6) but it says I have to do it via Apple Store and apple store app says there are no updates available.
How can I update it?
Ps. It is spelled "Logic Pro", and there are no other copies of Logic on my computer.First, you must be signed into the Mac App Store using the same Apple ID that you used to purchase Logic in the first place....
check the the purchse tab in the App Store app... To confirm you are signed in with the correct Apple ID as Logic Pro will show up there if you are. If not you are not signed into the App Store with the same ID used to purchase it initially. Use the menu option Store.. To sign out and sign in again with the correct ID
now check updates again.....
if that that desnt work.....
Copy your Logc app to an external drive, delete the copy in your app folder and unplug that external drive.. So there is no copy of Logic Pro on your system anywhere
Now go to the purchase tab in the App Store and you should see Logic Pro there for you to download and install again and this will be the 9.1.8 version... -
When I press play within the project, the playhead doesn't move from left to right with the audio like it should. As well as within the mix window, the audio levels are not displayed. However, when I click and hold within the arrange window, everything is fine and working properly, but I'm not going to be holding down the mouse the whole time I'm working on a project.
Does anybody have any sort of advice for me at all?
Also, if I were to buy Logic Pro X, would all of my projects currently running in Logic Pro 9 be able to open up in Logic Pro X? I also have the Waves Mercury Bundle, Vangard and Antares Auto-Tune, would all of those work with Logic Pro X?When I press play within the project, the playhead doesn't move from left to right with the audio like it should. As well as within the mix window, the audio levels are not displayed. However, when I click and hold within the arrange window, everything is fine and working properly, but I'm not going to be holding down the mouse the whole time I'm working on a project.
Does anybody have any sort of advice for me at all?
Also, if I were to buy Logic Pro X, would all of my projects currently running in Logic Pro 9 be able to open up in Logic Pro X? I also have the Waves Mercury Bundle, Vangard and Antares Auto-Tune, would all of those work with Logic Pro X? -
Logic start up problems please help
Recently every time for no apparent reason at all when Logic 7.1.1 launches I seem to always get a Error code saying 'Error Code 1 was returned by Coreaudio.
I have downloaded the latest RME drivers for my Multiface version 1 but still i get the same problem.
I must say that once I click on the error continue button Logic opens as normal and I can proceed to have a good session with out any crashes.
I have also reinstalled logic a few times and trashed my prefs and caches but it still doesn't seem to matter.
if anyone can help please as I find it as very annoyingHi,
Maybe you installed a new plug-in recently? I've gotten this message before when a plug-in is not quite compatible.
Cheers -
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
hi, can anybody convert me a .lso file made under v < 4 for windows to logic pro x? please pm me !!
or: does there exist a workaround to solve this problem?
my e-mail :
thanks
<E-mail Edited by Host>Hi
The Art Of Sound wrote:
What is the problem you are having?
Normally a window's ISO image can easily be opened in Finder just by double clicking on it...
The OP is referring to a Logic "Song" where the file extension was/is .LSO
CCT -
my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C -
Problem Please help me.....Let me know the area to look for it
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es -
[TV@Master] Problem please help
I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please helpi meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now
Maybe you are looking for
-
How can i use IDSM-2 in inline mode for more than two VLANs?
can i use the IDSM-2 in inline mode to be ips to more than two VLANS like this or it isn't intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50 intrusion-detection module 5 data port 1 access-vlan 100,200 thank u all for your help
-
KamdundefinedError on all Windows Systems kAMDMessageError
Hello, i use the newest iphone konfigurationprogramm and i update my iphones with my own FOVEA app. Since four week it is no more working on all windows PC (XP Win7 Win 8) I have testet on seven Windows PC, i can Install the profile an certifikation
-
How can I share ownership of a calendar on iCloud?
We are using iCloud on a small network and would like to share ownership of a calendar so multiple people can send invites? Is this possible?
-
Start up disk is full but have 309 GB available
Keep getting a message Force Quit Applications Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows an removing files from your s
-
Where can i find Oracle 8i Database?
Hi guys, I need to find Oracle 8i Database installation!! I was wondering if anybody knows some web site, or some part of oracle's web site that provides these older downloads. Thanks