Logic Remote won´t connect to Logic Pro X

I can´t get Logic Remote to connect to my Logic Pro X. I have no control surfaces installed and I  see the MacBook Pro in Logic Remote. I have no firewall on.
I never get any option to accept the Logic Remote on the computer. I have Yosemite Beta 10.10 running and iOS 8 on my iPad.
Any ideas?

Clue: Beta............. It could simply be that currently the beta of 10.10 isn't working correctly with iOS 8 and Logic Remote (yet)....
That's why you shouldn't run beta versions of software/OSs if you need a stable setup to work with....
However.....
I  see the MacBook Pro in Logic Remote
Did you mean that or did you actually mean "I cannot see........" ?
If the latter is true, what WiFi Router are you using?
Several non Apple routers are known to cause this because they have incorrect or auto port blocking enabled and you need to turn this off in the router's settings..
if you are using an Apple Extreme or Express then let us know...

Similar Messages

  • My logic remote won't find my macbook pro, what do i do?

    Hi. i downloaded logic remote to my iPad 2 and tried to connect it to my garageband on my macbook pro but it wont find the macbook... ive tried eveything, like creating my own internet, or connecting via bluetooth but nothing will work, please help me..

    Hello Rasmus Teuchler,
    Thank you for the details of the issue you are experiencing with the Logic Remote.  I found a few resources that I think might help. 
    First, I recommend checking to see if Garageband is the application controlled on the Logic Remote app:
    Logic Remote 1.0.2: How to switch between applications controlled by Logic Remote
    http://support.apple.com/kb/HT5967
    If you are still not able to connect with Garageband, I recommend the following articles for additional troubleshooting steps (these articles refer to Logic Pro X, but the steps are relevant for Garageband as well):
    Logic Pro X: Logic Remote may not connect with Logic Pro X
    http://support.apple.com/kb/TS5151
    Logic Remote: May not connect if a Touch OSC device is already installed in Logic Pro X
    http://support.apple.com/kb/TS5172
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPhone won't connect to Macbook Pro Hotspot!

    When I make my Macbook Pro into a hotspot my iPhone won't connect to the network. It'll detect, but won't connect. Running OS X 10.8.2 and  iOS 6.1 on an iPhone 5. Help!

    Post in the iPhone forum in as much as your settings need adjustment.

  • Iphone remote won't connect to my iTunes library and tells me the passcode is incorrect

    My iphone 5 previously worked with the Remote app to control streaming of music from my itunes library to my amp with Airplay capability.  Now it can't find my itunes library and when I go to the Settings for Remote app and try to add the library, it won't accept my passcode on itunes screen where it appears.  I deleted the app and re-added it to my iphone but it still won't work.  My Remote app still works on my Ipad so I'm a bit perplexed as to why it won't work on my iphone 5. Any suggestions?

    Hello dawgfaj,
    Thank you for all the information you provided with the Remote app issue you are experiencing on your iPhone.  I found an article with steps you can take when the Remote app is not connecting to iTunes:
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/ts1741
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Wireless Mighty Mouse won't connect with MacBook Pro in Bootcamp

    I recently swapped my Bootcamp-partitioned hard drive from an older Core Duo MacBook to a late-2007 Core 2 Duo MacBook Pro.  I had no problem using the wireless mouse with the MacBook.  I'd click on the Windows desktop once it booted up and it worked flawlessly.
    But on the newer MacBook Pro it won't stay connected.  I have to pair it with the Windows Bluetooth control panel each time I log in.
    I'm not sure if this is connected to the issue or not, but I'm not able to use the trackpad and buttons on the MacBook Pro keyboard either.
    I've seached the discussions without any success.  Advice anyone?
    Thanks in advance.
    Patrick

    Well, by some stroke of dumb luck it finally connected. I slid the on/off switch open until the green light started to blink, when the mouse connected I opened it all the way and decided to work.

  • IPhone 5 won't connect to MacBook Pro

    Not sure if this is the right place for this but I tried Apple's support forums and couldn't get anything useful
    When I try to connect my iPhone 5 (iOS 8.1) to my MacBook Pro (mid-2012, OS X Yosemite 10.10) it will flash as connected and then disconnect immediately, and I am unable to establish a connection again.
    I've tried rebooting and updating all software. The same cord connects my iPhone to my work MacBook Air with no problem, and the USB ports on my Pro work fine for other things.
    Does anyone have any ideas or know how I can fix this? All my music is on my Pro and I can't get it onto my phone.

    Ignore that first line.... copied this from another post

  • B110a won't connect to Macbook pro or IPAD

    I've got a B110a serial number CN0CN3V63605J8, running firmware CHL1FN1113AR FW patch 0.
    It's sat on a home wireless network with a DLINK router DSL-270R.
    I can print to it with all my 3 PCs using drivers dowloaded from the HP website. All 3 PCs are different makes.
    I am unable to print to it using either a MacBook Pro or IPAD1.  I've read the support forums and tried some of the fixes but to no avail.
    My Macbook is running LION, I downloaded the latest drivers on the 13th August from Apple.  My IPAD is running OS4.3.3.
    Neither Macbook nor IPAD "see' the printer.
    I read on the HP website that the b110a is capable of printing with Macs, but with a firmware update.  I can't do this from the b110a.  When I go to Set up>Preferences>Product Updates, I get the following error message "There was a problem connecting to the server, press retry to connect again of OK to exit"
    Any ideas.  I'm thinking it's either the need for a firmware update, or that the router is masking MAC, but I don't really understand this.
    Thanks
    This question was solved.
    View Solution.

    Great work, thanks!
    Yes, I mean upgrade the firmware on the router.  This could be the source of all of your troubles.  You could even try to cycle power on your router to reboot it, then try again.  But, I would really try to check its firmware.
    To get into your router settings type 192.168.0.1 into a browser address window.  The login is 'admin' and there is no password.  See if you can find a way to update firmware from there.  If it is not obvious, go to the D-link support website and hunt around.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Macbook Pro Airport Won't Connect When Macbook Pro Bootcamp Will

    I have a Macbook Pro 2.16GHz Core Duo that has had problems with Airport connectivity since I got it. I can never get anyone to help me with it because it will never show the problem at the Apple Store.
    One place that I have to work at has been very, very frustrating.
    They have a number of access points called Wireless #1, Wireless #2, and so on. Every access point is a Linksys-Cisco WAP54GP. All of them are on channel 6. They are using a WEP 40-bit hex key with the same key on every AP. They don't understand the obvious flaws in their system, they will not change it nor help me...at all, so there's no point in suggesting things along that route.
    I know that their network and their key works, though, because if I reboot into Windows on the SAME machine it works fine and the connection is great. Mac OS, however, will not connect and will not tell me why. All it will say is "There was an error joining the network." I have read suggestions saying that you have to put a $ or "0x" in front of the key to signify that it is a hex key (which I don't have to use on other WEP hex key networks), but when I try to type that in, the password dialog will not allow the characters $ or "x" and it beeps at me.
    Does anyone have any help for me?

    It will connect to other networks with and without
    WEP. It will connect to other networks that use
    WPA.
    There are many networks, though, that give me the
    "There was an error joining the network.", and I
    don't know why.
    I cannot enter a $. As I stated previously, the Join
    Network dialog will not allow me to enter that
    character when it is set to WEP 40/128 bit hex.
    Also, as I have already said, I cannot change the
    network to WPA. I understand the benefits of WPA
    over WEP, but I am not the network administrator.
    They will NOT change their settings. I know the
    network works with Windows on my computer. What is
    it about Mac OS that is preventing this?
    Prior to the last Security Update, I believe 2007-02, broke access to 2wire Routers. It was very frustrating to me as well. The fault or problem, I believe, may lie in a firmware update to these routers. I performed one for my 2wire router and I am now able to connect.
    My theory...
    William

  • Just got new iphone 6, won't connect to macbook pro?

    Hi, I've just got a new iphone 6 and when I connect via USB to my macbook pro, it doesn't recongise it. I want sync and restore my backup from old phone.
    Any ideas why?

    If you don't see your connected device in iTunes for Mac - Apple Support

  • Usb wont won't connect on macbook pro i7?

    my usb port wont connect any flash drives or anything. it use to work with powerd things but now it wont even work with that.

    Run the Apple Hardware Test:
    http://support.apple.com/kb/HT1509

  • Internet is either very slow or won't connect to MacBook Pro.

    There's no problem with the desktop Windows PC we have, though its connected directly to the router via cable. I've tried clearing the cache and cookies and etc. from Safari. I can get the wifi to connect if I go through the Network diagnostic, though it doesn't work. Help?

    Try:
    1: Create a new network location in System Preferences > Network  (edit locations > new)
    2: Make sure your time and date are current and correctly being updated. (match the PC's)
    3: Run through this list of fixes to make sure your Mac is working correctly.
    ..Step by Step to fix your Mac
    4: See this list of possible issues and their resolutions.
    ..WiFi, Internet problems, possible solutions

  • Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac

    Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
    Pls help
    tks
    Kind Regards
    Richard Garrell
    Belo Horizonte
    Brazil

    Hi Richard Gl , 
    Welcome to the Apple Support Community!
    I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
    Logic Remote for iPad: Get started
    Cheers,
    Joe

  • Logic pro won't install on macbook pro

    I have Logic Studio 9.1.5 working on my iMac i7 under OS X 6.8.  It is an upgrade of an upgrade, etc going back to V 5.5.  I have the original Emagic key from Logic 5.5.  My recollection is that I had to use this to install the Logic Studio upgrade to get Logic Pro 8, but that when I upgraded to V9, the key was not necessary.
    I'll be visiting some remote sites for recording later this fall, and decided to move Logic to my MacBook Pro for the trip. It came with Lion.  I installed the minimal setup from the Logic Studio package to get Logic Pro 9 on the MBP. It asked me for the serial number and to insert the EMagic key at the start of the install process.  Once installed, it would not launch under Lion so I installed the 9.1.5 update.  When I tried to launch after this update, Logic started up, but I was asked for the serial number and Emagic key again.  This time, it reported that my key is not elegible for this upgrade.  Makes no sense, given I had this running with no probllem on the iMac.
    Have there been any other steps required to install under Lion?  Is there anything else anyone can suggest to look into?

    Samuel, this won't help you, but it may help some others.
    I had CS2 installed on my good old TiBook 400MHz, and it worked fine there. When I got my new MBP C2D 2.33 yesterday, I followed the instructions for connecting via FireWire, and after 2 hours, everything copied over just fine. So far, everything works fine too, which is really amazing to me, including the Adobe CS2 applications.
    I did make sure that my old TiBook was up-to-date, and ran Mac Janitor on it, and fixed permissions. That may have made the difference.
    The only things which don't run now are the old OS9 applications, and Final Cut Express 3.0 (but there is a work-around using the esc key).
    Hope this is encouraging to someone who is thinking about gettig a MBP C2D.

  • Logic Pro x - additional content downloads and installs but it won't show up in my Logic Pro X. Where is the add'l content downloaded and how do I activate on Logic Pro X?

    The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is  downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?

    similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar:  Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
    Any clues?
    This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***!

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

Maybe you are looking for