Logic required for creation of PR and PO report

Dear Experts,
I want to create a report which gives the details of internal lead time for creation purchase requisition to purchase order. Well which tables I need to use for this . I know some tables like eban, ekko to join. Can you please give me the correct information. I only want those purchase orders which are created with purchase requisition. I need to calculate how many days taken from PR to PO.

Dear,
PR release date will be found in CDHDR table in CDHDR-UDATE. PO dates you can find as mentioned in replies.
But the problem is the time taking for executing the report. It will more lenghty to read different tables and give you output (if you go for yearly range data). ABAP dump error.
Better, just consult with ABAP team and they can give you a correct solution.
Regards,
Syed Hussain.

Similar Messages

Requirment for creation chat apllication and email application?

I am using flex 3 am new to flex my task is to design a chat and email apllication for that what are the required source and what all the things i have to do, Please can any one say me the things in detail how the mess is passed to server and retrieved by the client . how the server identifies a new mail has came.
With Regards
K.Karuna
Thank u

Hi,
Does anyone else have same issues or is there a way to get around these.
Regards
K.R
KR

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly. Do you want Itunes to repair this for you?" When clicking yes another message indicates not able to remove services. Another message is: "Service (ipod service) could not be installed. Verify that you have sufficient privileges to install system sources." I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages. I cannot burn CDs using Itunes. This all seemed to happen when I updated itunes to version 10. I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

See the second box of Troubleshooting issues with iTunes for Windows updates.
tt2

The software required for communicating with ipod and mobile phones was not installed correctly

ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10 64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Transaction code for creation of Complaint and RMA?

Hi,
In the tcode crmd_order i've a complaint and return creation option is this the one to create complaint and return material authorization.
pl also tell me how do you create a repair order and a service order.
Pl I need transactions. I understand the configuration as I have the best prasctice bu I do not know the creation of RMA / Complaints/Repair order /service order ..that is the trnasactions required for service.
For sales and marketing I know ..I am looking for service module in CRM
can any one please help me out as it is a very urgent requirement.
Thank you,

Hi Polite,
The transaction CRMD_ORDER is the superset for all the transactions mentioned by you. So it is better to remember just one transaction instead of remembring the subsets . Once you use the transaction CRMD_ORDER and then Follow the menu Business transaction -> Create (F5) you will get the list of transactions you can create this is nothing but the the transactions you have mentioned.
If you know the transaction no. you can directly open that in transaction CRMD_ORDER. The other opetion is to use the SAP Menu instead of transactions.
Reward points if it helps!!
Best regards,
Vikash.

Programming Logic required for pulling the records for past month /week

Hi All
I need help in the SQL programming logic.
Oracle Database Version: 10.2.0.3.0
Requirement
In a data warehouse environment, I need to programme for weekly and monthly automated batch jobs to insert the data from Data_tbl to Reporting_tbl for generating reports. Tables descriptions are given below.
Table1 - Data_tbl (Source table –this table gets updated everyday).
Record_dt first_name last_name
Table2 - Reporting_tbl_(Target table)
Cycle_dt first_name last_name
1. Monthly Report
In the SQL Query, I have where clause condition—
Where Record_dt >=’01-nov-08’ and record_dt<=’30-nov-08’
Using the above condition in development, I am pulling the data from source table for the past month data. This will be repeated every month and it should be automated.
i.e., if I run this report any time in dec 2008, it should pick records of dates from Nov 01st to Nov 30th 2008. if I run this report any time in Jan 2009, it should pick records of dates from Dec 01st to Dec 31st 2008.
Date Values should be assigned for past month. Value of Cycle_dt in target table should be end date of past month like 30-nov-2008, 31-dec-2008.
2. Weekly Report
In the SQL Query, I have where clause condition—
Where Record_dt >=’01-dec-08’ and record_dt<=’07-dec-08’
Here week start day is Monday and end day is Sunday.
If I run the report between Dec 08th to Dec 14th , it should pull records of dates from Dec 01st to Dec 07th 2008.
On Dec 15th, it should pick from Dec 08th to Dec 14th.
Value of Cycle_dt in target table should be end date of past week like 07-Dec-2008, 14-Dec-2008.
Please help me with the logics for both Monthly and Weekly reports.
Thanks

Hi,
For the monthly report, instead of
Where Record_dt >=’01-nov-08’ and record_dt<=’30-nov-08’say:
Where Record_dt >= TRUNC (ADD_MONTHS (SYSDATE, -1), 'MM')
and record_dt < TRUNC (SYSDATE, 'MM')SYSDATE is the current DATE.
TRUNC (SYSDATE, 'MM') is the beginning of the current month. (Notice the condition above is less than this date, not equal to it.)
ADD_MONTHS (STSDATE, -1) is a date exactly one month ago, therefore it is in the previous month.
For the weekly report, instead of:
Where Record_dt >=’01-dec-08’ and record_dt<=’07-dec-08’say
Where Record_dt >= TRUNC (SYSDATE - 7, 'IW')
and record_dt < TRUNC (SYSDATE, 'IW')TRUNC (dt, 'IW') is the beginning of the ISO week (Monday-Sunday) that contains dt. Again, notice the end condition is strictly less than the beginning of the current week.

Need User Exits for Creation of Delivery and for Posting Goods Issue

Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
Mindaugas

In the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael

Third Party CA certificate requirement for Cisco expressway C and E

Hi All,
We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate, who are using Third Party CA certificate for MRA solution.

First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
Go to Maintenance > Security certificates > Server certificate
NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
This is what the CSR page looks like

Logic required for Sort in ALV

Hi All,
I am dowloding the ALV report layout in excel sheet thorough mailing functionality.
I want to implenemnt the dynamic sort. Here I am writing this.but i want the logic for below code.
 CALL FUNCTION 'LT_DBDATA_READ_FROM_LTDX'
 EXPORTING
I_TOOL = 'LT'
 IS_VARKEY = W_VARKEY_EU
 TABLES
 T_DBFIELDCAT = IT_DBFIELDCAT_EU
 T_DBSORTINFO = IT_DBSORTINFO
 T_DBFILTER = IT_FILTER_LAYOUT
 T_DBLAYOUT = IT_DB_LAYOUT.
LIT_DBSORTINFO[] = IT_DBSORTINFO[].
 SORT LIT_DBSORTINFO[] BY KEY1.
 DELETE ADJACENT DUPLICATES FROM LIT_DBSORTINFO[] COMPARING KEY1.
 LOOP AT LIT_DBSORTINFO[].
 CLEAR: LW_SPOS,
 LW_UP,
 LW_DOWN,
 LW_SUBTOT,
 LW_COMP,
 LW_EXPA,
 LW_GROUP.
 CLEAR IT_DBSORTINFO[].
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SPOS'.
 IF SY-SUBRC = 0.
 LW_SPOS = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'UP'.
 IF SY-SUBRC = 0.
 LW_UP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'DOWN'.
 IF SY-SUBRC = 0.
 LW_DOWN = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SUBTOT'.
 IF SY-SUBRC = 0.
 LW_SUBTOT = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'COMP'.
 IF SY-SUBRC = 0.
 LW_COMP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'EXPA'.
 IF SY-SUBRC = 0.
 LW_EXPA = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'GROUP'.
 IF SY-SUBRC = 0.
 LW_GROUP = IT_DBSORTINFO-VALUE.
 ENDIF.
 LOOP AT IT_ALV_DATA FROM W_LOOP_FROM_EU TO W_LOOP_TO_EU.
 LW_TABIX = SY-TABIX.
 READ TABLE IT_FIELDCAT INTO LW_FIELDCAT WITH KEY
 FIELDNAME = LIT_DBSORTINFO-KEY1.
 IF SY-SUBRC = 0.
 ASSIGN COMPONENT SY-TABIX OF
 STRUCTURE IT_ALV_DATA TO <LFS>.
 IF SY-SUBRC = 0.
 CLEAR LW_CHAR.
 LW_CHAR = <LFS>.
 IF LW_SPOS= 'SPOS'.
 LOGIC Required
 ENDIF.
 ELSEIF LW_OPTION = 'DOWN'.
 LOgic required
 ENDIF.
 ENDIF.
 ENDLOOP.
 ENDLOOP.
regards,
Ajay reddy

Hai,
Let
1)general data
2)all customers
3)company code data
4)sales organization data
are the check box names,Then
Just use the piece of code below:
IF general data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF all_customers = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF company_code_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF sales_organization_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
Now check whether more than one Check Boxes are selected or not
IF COUNT GT 1.
"* Do the oprations what ever you want here
ENDIF.
Reward points if it helps you.
Regds,
Rama chary.Pammi

Installation Requirements for Oracle Apps Forms and Report Services OEL

Hi all.
Where can i find detail information about the installation requirements for Oracle Application Server Forms and Report Services under OEL 4 (Oracle Enterprise Linux) or OEL 5?
It seems there's only information about Oracle Application Server in general, not the reduced or partiuclar distribution, Forms and Reports Services.
Thanks in advance ....!

I already saw the documentation for Forms and Reports Services Installation.
This thread is about the specific requirements, if any, for this product on OEL 5 or OEL 4.
See, there's a note on Metalink(546174.1) regarding some specific issues about installing Oracle Application Server on OEL5, but i'm not sure if this involves Oracle Application Server Forms and Reports Services.
The idea is to know if these issues applies to this specific distribution .
Hope you understand my question now. Thanks in advance

Which database driver is required for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server

Hi,
i am trying to configure JDBC with weblogic. Can any one tell me which deriver needs to be selected for weblogic 10.3 and Oracle DB 11g both on MS2008 separate server.
if i use BEA oracle Driver (Type 4) version 9.0.1, 9.2.0,10,11, i find error (see snap:2)
Connection test failed.
[BEA][Oracle JDBC Driver]Error establishing socket. Unknown host: hdyhtc137540d weblogic.jdbc.base.BaseExceptions.createException(Unknown Source) weblogic.jdbc.base.BaseExceptions.getException(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnectionHelper(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.makeConnection(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source) weblogic.jdbc.oracle.OracleImplConnection.open(Unknown Source) weblogic.jdbc.base.BaseConnection.connect(Unknown Source) weblogic.jdbc.base.BaseConnection.setupImplConnection(Unknown Source) weblogic.jdbc.base.BaseConnection.open(Unknown Source) weblogic.jdbc.base.BaseDriver.connect(Unknown Source) com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505) c om.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConn ectionConfiguration(CreateJDBCDataSource.java:369) sun.reflect.GeneratedMethodAccessor 826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...
and
when i use oracle's driver (thin) version 9.0.1, 9.2.0,10,11, i find error
Connection test failed.
Io exception: The Network Adapter could not establish the connection oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:10 1) oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112) oracle .jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173) oracle.jdbc.drive r.DatabaseError.throwSqlException(DatabaseError.java:229) oracle.jdbc.driver.DatabaseE rror.throwSqlException(DatabaseError.java:458) oracle.jdbc.driver.T4CConnection.logon( T4CConnection.java:411) oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnectio n.java:490) oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:202) oracle .jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33) oracle.jdbc. driver.OracleDriver.connect(OracleDriver.java:474) com.bea.console.utils.jdbc.JDBCUtil s.testConnection(JDBCUtils.java:505) com.bea.console.actions.jdbc.datasources.createjd bcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:36 9) sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl. java:25) java.lang.reflect.Method.invoke(Method.java:597) org.apache.beehive.netui .pageflow.FlowController.invokeActionMethod(FlowController.java:870) org.apache.beehiv e.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809) org.ap ache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478) or g.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java :306) org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336 ) ...

i am finding this error when i click on Test Configuration button to test the connection wth oracle DB

Logic required for a Internal table issue

Hi All,
I have 2 internal table. I need STLNR value to another internal table. Both having same field. But while reading from one internal table to another internal table using IDNRK key, One idnrk having 2 different stlnr value. But its taking only one. How to take both the values?
The internal table value like below.
it_stpo--> This is first table, Here one Idnrk having different stlnr value. I need the same in to next table. Here i read with idnrk field but its taking one stlnr value only into next table.
How to change the logic ?
Below is it_stpo table and next one is it_mbew_1
it_stpo
STLNR     IDNRK             MENGE
17224     00439RM1     2.3
17225     00439RM1     4.2
172333     00849RM2     5.6
172158     00432TM3     7.2
152164     00583RM4     8.4
176123     00583RM4     2.3
it_mbew_1
STLNR     IDNRK             STPRS
     00439RM1     111.22
     00439RM1     126.45
     00849RM2     3.3364
     00432TM3     15.5888
     00583RM4     0
     00583RM4     0.235
My logic like below,
          SORT it_stpo BY idnrk.
          SORT it_mbew_1 BY matnr.
          LOOP AT it_mbew_1 INTO wa_mbew_1.
            READ TABLE it_stpo INTO wa_stpo WITH KEY idnrk = wa_mbew_1-matnr BINARY SEARCH.
            IF sy-subrc = 0.
              wa_mbew_1-stlnr = wa_stpo-stlnr.
              MODIFY it_mbew_1 FROM wa_mbew_1 TRANSPORTING stlnr WHERE matnr = wa_mbew_1-matnr.
            ENDIF.
          ENDLOOP.
Kindly help us.
Mohana

Try below logic.
add one more field to it_stpo flag type char01.
update the field with value 'X'.
SORT it_stpo BY idnrk.
          SORT it_mbew_1 BY matnr.
          LOOP AT it_mbew_1 INTO wa_mbew_1.
            CLEAR WA_STPO.
            READ TABLE it_stpo INTO wa_stpo WITH KEY idnrk = wa_mbew_1-matnr
flag = 'X'.
            if sy-subrc eq 0.
                     move ' ' to wa_stpo-flag.
                     modify it_stpo from wa_stpo index sy-tabix.
                      wa_mbew_1-stlnr = wa_stpo-stlnr.
                     MODIFY it_mbew_1 FROM wa_mbew_1 TRANSPORTING stlnr WHERE matnr = wa_mbew_1-matnr.
             endif.
          ENDLOOP.
Regards
Vinod

Logic required for creation of PR and PO report

Similar Messages

Maybe you are looking for