Logic sampler, i need to put my e mu e4xt ultra samples into my logic pro
i have my e mu 4xt ultra samples on my desk top. they show up as .e4b
i need to convert them to .exs so they will line up in my logic sampler.
how can i do this?
aaron
I believe you are mistaken, I'm afraid. I could be wrong, but I'm pretty sure Logic EXS24 doesn't read EMU format samples - just AKAI and .gig files (and soundfonts).
But there are a couple commercial programs out there that can convert EMU disks. The one I use is called 'Translator' by Chicken Systems. Unfortunately, I'm not a big fan of the product which has always been extremely buggy.
Nevertheless, it did do the EMU translations for me. I also noticed a recent announcement from them about a new program. May be worth a look.
There's another translator program out there, but I don't remember the name. Do a search on KVR... There are more options on the PC if you have (or can borrow) one.
cheers.
Similar Messages
-
IM IN SERIOUS NEED OF YOUR HELP! HDV 1080i 50 capture into Final cut pro 7?
Hi everyone, Ive just recently got myself an IMAC with final cut studio. I also have a Sony HVR Z5. I have been shooting on the following settings:
HDV 1080i 50 (scan type 50)
Ive connected the camera to my computer via firewire but have been having huge problems working out what settings to use? Ive tryed the easy set ups but still no joy? I keep getting the following message pop up:
'No date device. Capture was aborted due to lack of incoming data from device. Check your connections and that the disk is palying'
The disk is def playing on my camera (I can see it on the viewfinder) but not on the computer?
If anyone knows hot to solve this problem could they plare give me step by step instructions on how to set up final cuts capture settings?
Thanks very muchThere is only one correct capture preset. Don't go screwing around with trying different ones, you'll just mess up your preferences file and corrupt it.
To start trash your preferences.
http://www.fcpbook.com/Misc1.html
Set the HDV 1080i50 preset. Make sure the camera is set to output HDV and that iLink is switched off. -
Need to put a logic in FDM where by accounts and ICP is compared and accord
Hello ,
Need to put a logic in FDM where by accounts and ICP is compared and accordingly ICP field is modified. Need to create an array of accounts
Scenario:
ICP needs to be derived based on account code. If account code is part of a predetermined list then further logic needs to be executed.
For ex. If Acc is part of the account list ("7880","7881","7882","7883","7340","7341",
"7342","7343","7345","7347","7346","8460","8603","8484","8610","8611","8612","8614")
then if ICP <> 00000 then ICP = strfield
else if Acc not part of list then ICP = "00000".
We are facing issues in defining and referencing an array in FDM which would store the list of accounts code which can then be compared along with ICP. The other logic is as follows
If strField <> "00000" And Val = Acc_Arr(i) Then
T3 = strfield
End If
If strField = "00000" And Val = Acc_Arr(i) Then
T3 = "ICPENT"
End If
If strField <> "00000" And Val <> Acc_Arr(i) Then
T3 = "00000"
End If
If strField = "00000" And Val <> Acc_Arr(i) Then
T3 = "00000"
End If
Regards,Hi,
Two options:
1. You can evaluate ICP based on either source account or target account. Use varValues(13) for source account and varValues(14) for target account in the conditional mapping statement for ICP.
2. A faster performing option is to concatenate the Account and ICP into a single code, which you then import in the ICP dimentsion. You can then use simple mapping rules to do your ICP mappings and avoid conditional statements altogether.
Regards,
Vlado -
What's the best way to (re)install Logic Studio? Need Help.
I bought Logic Studio a few months ago and installed it on my new MacBook Pro 2.4Ghz with 2G Ram, 160G hard drive @ 7200 rpm. Being new to Logic, at install, I just put all 40+ gigs of content on the computer. After a while I considered putting the Apple Loops (roughly 12gigs) onto an external hard drive to save space on my computer, just to see if it would work, then consider moving more content over later. After doing this the Logic application couldn't find the Apple Loops, and I couldn't find a way to help it see the new path, so my Apple Loops were essentially rendered useless (since I had already deleted them from the computer). So I stopped right there, and haven't done anything else. Just worked with Logic without using Loops, which I have to say is still an incredible program.
What also seemed strange was this: In moving the Apple Loops, the available disk space on the computer didn't seem to change much. It went down a few gigs, but not the 12 or so I was expecting. Not sure why that is. It seems like Logic and all the content is actually taking up around 50 gigs or so on my computer (and the Apple Loops are supposedly gone or not available). What is that about?
Feeling like I had really fouled things up, I called Apple Care. They said that the content of Logic is stored in many places in the computer's libraries and system folders, but it was really confusing trying to locate all of it, because the info they sent was from Logic 7 and older versions of GarageBand. I guess Logic 8 is too new for them to have anything on it. There is no uninstall for Logic Studio. But they strongly recommended that I perform an Erase and Install, and then re-install all my software including Logic, and then assign the hard drive I wanted the content in. That would open up a lot of the computer's hard drive space, they said. It seemed like an extreme measure to take for such a small blunder, and I haven't tried it yet, but will if it's the best option.
If I do this, is running Logic content (i.e. Loops, Impulse Responses, Jam Packs, etc.) from an external hard drive (and the one I have to use is 5400rpm--is that too slow or am I getting too picky?) the best way to go, or should I have all Logic material coming from the same machine? How do I get some of my hard drive space back?
Ugh.
Has anyone out there experienced this too? Is there anything documented about where the content is stored for Logic Studio? Is Erase and Install really the best thing to do in this situation?
So many questions...
Thanks.Hey Blue,
Let me see if I can help you a bit.
Logic Studio has 28+ gb of loops. Almost 23 for STP and 6 for the Jam Packs, etc. They should be located in /Library/Audio/Apple Loops/Apple (that's the default install loc.). Copy them to an external drive and then delete them from your main drive. Go to /Library/Audio/Apple Loops Indexes and delete those text files. Now go to /Library/Preferences/Soundtrack Pro and delete those text files, too (more Loop Indexes).
Now open Logic Pro and it will say 'No Apple Loops found'. Click 'OK' and then open your Loop Browser. Drag all the Jam Pack folders, STP folder, etc. that you want to use onto the Loop Browser. Logic will ask you if you want to 'Copy to Loops Folder' or 'Current Location'. Choose 'Current Location'. Logic will now index the loop folders.
NOTE: You can change the names of the folders to suit your liking. For example: I added the 2, 3, 4, 5 after the Jam Pack names to make it look smoother on the popup menu and changed iLife Sound Effects to Sound Effects - iLife and Apple Loops for STP to STP. Now the Jam Packs 1-5 come up first on the popup menu and the FX stay at the bottom. I likee!!
Now, if you like you can take your EXS Factory Samples and Ultrabeat Samples, 3.35 & .889 gb respectively, and copy them to an external drive. I have mine in the same place as my Jam Packs, etc. You can find these files in /Library/Application Support/Logic. Toss out the originals and put ALIASES from the external drive back into the /Lib/App Sup/Logic folder.
Also, if you open STP and click the Search tab in the right pane you will see a button that says 'Setup' next to it. Click that and you can use the checkboxes in the window to activate/deactivate any of the loop folders available.
A clean install is the best IMO if you have a little time because a) you DO NOT have to install GB at all (that saves the .aif file size - Logic Studio uses .caf files at half the size of the originals) b) Logic Studio will install the extra GB or Logic 7 content if you need it at it's reduced size. It will basically get rid of all the old clutter that you do not need. Only install what JP's you want and move the bigger stuff to an external.
Rock up Logic and it should all be in place. That procedure saved me 32.5 gb on my main drive.
NOTE #2: You have another 12 gb (if you installed all Jam Packs) that reside in the /Library/Application Support/GarageBand/Instrument Library/Sampler. These are the Jam Pack Instruments & Sampler files for World, Symphony, etc. They cannot be moved from the startup HD (as far as I can tell). So keep that in mind if you don't want a certain JP.
Hope that helps,
Dave -
AIX 6.1 - Do we need HACMP to store the OCR and Voting Disks on Raw Logical
We are planning to install 11G r1 rac on AIX 6.1. We will use clusterware and ASM. We would like to avoid GPFS and HACMP.
We plan to put the Clusterware OCR and Voting Disks on Raw Logical Volumes.
I do not believe we need HACMP. see the passage below from doc:
Oracle® Clusterware
Installation Guide
11g Release 1 (11.1) for AIX Based Systems
B28258-05
Configuring Raw Disk Devices for Oracle Clusterware Without HACMP or GPFS
If you are installing Oracle RAC on an AIX cluster without HACMP or GPFS, then you
must use shared raw disk devices for the Oracle Clusterware files. You can also use
shared raw disk devices for database file storage. However, Oracle recommends that
you use Automatic Storage Management to store database files in this situation.
This section describes how to configure the shared raw disk devices for Oracle
Clusterware files (Oracle Cluster Registry and Oracle Clusterware voting disk). It also
describes how to configure shared raw devices for Oracle ASM and for Database files,
if you intend to install Oracle Database, and you need to create new disk devices.
Question:
Do we need HACMP to store the OCR and Voting Disks on Raw Logical Volumes? According to the passage above we do not.You can archive log either in shared location or separate location associated with each instance. Oracle recommends using a shared location for all the instances in a RAC configuration. Check the topic "Location of Archived Logs for the Cluster File System Archiving Scheme" in Clusters Administration and Deployment Guide
-
If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card
Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck. -
My ipad is disabled and it says i need to connect to itunes when i connect it to itunes, it says it wont recognize it until i put my passcode into my ipad, but with my ipad disabled, this is immposible, how can i resolve this problem?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad an resync your content to it
-
There are sites like Amazon, Facebook and pages where I need to put info like name, address, etc, that don't show where 'next' or 'skip' or 'continue' are. There is just alot of space. When I move my cursor around I have to guess if it's the right one and click
For some ways around this see [http://kb.mozillazine.org/User_name_and_password_not_remembered User name and password not remembered - MozillaZine Knowledge Base]
Another option is the [https://addons.mozilla.org/en-US/firefox/addon/60265/ Saved Password Editor] add-oin which allows you to add passwords for sites that disable password saving. -
# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..
http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link
-
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
Need help to choose a DAQ for simultaneous sampling
We need to choose a DAQ for simultaneous sampling. The restrictions are:
a) 2 channels
b) The signals on both channels are not continuous. A valid input on the channels is signaled by a falling edge in a third line that can be used as a trigger.
c) The rate of these signals can be up to 50000 per second but they do not arrive in a periodic way.
d) The timing:
The trigger is a pulse of 600 ns
The signals on the channels are stable 200ns before the leading edge of the trigger pulse and remain stable for 900ns.
We have seen the PCI-6143 but we are not sure if it is the best choice.
We have some questions:
1) Does the 6143 fulfill the timing requirements ?
2) Is it posible and easy to set the board to take one sample after the trigger ?
3) Is there a better choice than the 6143 to solve the problem ?
4) Can we solve this problem programming in VB or VC++ and using the software that comes with the board or do we need to buy extra libraries ?1) Does the 6143 fulfill the timing requirements ?
Yes, the 6143 should fulfill these requirements. It has a 250 KS/s sampling rate per channel which should give you 5x oversampling at the 50 kHz maximum bandwidth you indicated. The minimum delay from the recognition of the trigger to the first sample on this board is 100 ns which falls within the 900 ns window.
2) Is it posible and easy to set the board to take one sample after the trigger ?
It's not clear to me whether you want to take a single sample after a trigger and stop or use the trigger as an external sample clock to acquire several samples at the rate of the trigger. In either case, it's possible and relatively easy to do so. The only quirk is that the minimum number of samples to acquire for a hardware timed acquisition is two samples. This means if you really only want one point after the trigger, you'll have to setup the hardware to acquire two samples and then throw the second one away in software.
3) Is there a better choice than the 6143 to solve the problem ?
This seems like a pretty solid choice for the application you described. However, you didn't mention what the amplitude of your input signals are. The 6143 has a fixed +/- 5 volt range. If this isn't sufficient, you'll have to provide signal conditioning or choose a board with a wider input range. Also, I'm assuming your trigger signal is a TTL signal. If it's an analog signal, you'll want to choose a board with an analog trigger circuit (the 6143 doesn't have an analog trigger). The PCI-6111 is a 2 channel board with a +/- 42 volt input range, an analog trigger, a 5 MS/s sampling rate, and will also meet all of your requirements. The only down side of the 6111 is that it is more expensive and is a 12 bit converter instead of 16 bit. The PCI-6120 has even more functionality than the 6111 and has a 16 bit converter at 800 KS/s. PXI has some more simultaneous offerings, but I'm assuming you want to stick with PCI. You can also check out some of our modular instrument offerings such as the PCI-5102. I'm not as familiar with the modular instruments, so you'll have to check out the specs for yourself. Whether there is a better choice or not is pretty subjective. That will depend on how much you're willing to spend for the features and specs you really care about. From the information you provided, the 6143 will be the lowest cost solution that meets the requirements you specified.
4) Can we solve this problem programming in VB or VC++ and using the software that comes with the board or do we need to buy extra libraries ?
The DAQmx driver provides interfaces to both of these programming environments at no extra cost. -
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also? My laptop got stolen so I changed my password and wanted to be sure it's safe to enter in the new one on my phone. I don't want it to snyc to my laptop.
Hi loro,
Thanks for visiting Apple Support Communities.
I'm sorry to hear that your laptop was stolen. Changing your password was a good step.
Entering your new password on your iPhone will not affect the laptop, as mentioned in this article:
Apple ID: Changing your password
http://support.apple.com/kb/HT5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Best Regards,
Jeremy -
I have a new iPhone 6 and want to buy apps. When I click on "buy" some say they don't take PayPal and that I need to change my payment information. ITunes seems to accept PayPal, but not the apps store. Well, some do, some don't. I still need to put in the info but cannot find how to do it. Help please!
Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
-
I need to put a web page in its own folder
I'm designing a site in Muse and a couple of pages have to be stand-alone and accessed by the user typing the address directly like, www.site.com/info
So, I need to put a page names index.htm in the folder info. How can I do this with? The stand-alone pages use the same assets and graphics etc as the main site.
Many thanks,
K.Hi Kevin,
Based on our customers feedback, we are constantly evolving and adding features to Muse. Our goal is to provide you one of the best website designing software and we are heading towards our goal steadily.
Regards,
Aish
Maybe you are looking for
-
LSMW - Sales Order Migration using RVINVB10
Dear Experts, I have decided to use LSMW to migrate the open Sales Orders using direct input report RVINVB10. My question is: How do I enter the WBS Element PS_POSID in the item line of Account Assignment tab? There does not seem to be a field in the
-
Adobe reader has stopped working
Need help opening my pdf files. I keep getting a crash error that states "Adobe Reader has Stopped Working"
-
I keep getting an error message when i try to send emails.
I just got the palm treo 650 on alltel. didn't realize it was going to be so involved. lol I got email set up but keep getting an error message when i try to send. the message is 530 5.7.0 must issue a STARTTLS command first. What does that mean
-
hi experts , any one tell me how to colour a cell in alve. give me some sample code. reward points.......
-
Organization structure in Government
We have requirement to implement the Oracle apps PO,AP,Project, GL modules of Oracle apps into Government. Government having main State, then District, Taluka, Village....etc... as per standerd government. Now we want to implement the data security h