Logic Set Up Help

Hi I have just got a new imac 2.66ghz intel and have installed logic 7. I previously had it set up on my 2.4ghz and had it running fine. I run a turntable and a cd player through a mixer and into the mac through the input with it coming from the output to an external amp and speakers.The problem i am having is when i go into logic i can hear loop browser but cant hear the sound from the turntable, When i try to record it picks up through the built in mic.
I know i have set it up before but im stuck to as what i need to do now.
Any help would be greatly appreciated
Message was edited by: Bobcat10

Hi
I have set audio in to built in input and audio out to built in output but if i check software monitor i can still hear that it is picking up the built in mic.

Similar Messages

  • Help with Logic Sets

    Hi guys,
    We have a requirement for writing a logic set.
    The requirement is as follows-
    1. A metric Set gets data at a frequency of 4 months cycle (data is input in July, November and March).
    2. The user will enter the Current data corresponding to these 3 months only.
    3. The client needs the data entered for these months (July, Nov, Mar) to be copied to the remaining 3 months in the cycle.
    Can this be done using Logic Set? Can you please advise on how should we proceed with this requirement.
    Thanks in anticipation,
    Sameer

    Hi,
    Logic sets are very useful for various calculations.  They can be used when importing data to create "new columns" of data based on calculations of other data - and they can also be used at run-time as virtual variables.  I'm not suggesting that this is a good use of the later - but I wanted to answer your question and help folks understand how to use Logics.  (There may be better/more performant ways of accomplishing the same thing, such as making the variable a LAST or RATE variable.)    However, if you want to become familiar with the use and power of LOGICS, here is an examples below to get you started:
    I'm using the HFPBM sample database as a starting point. 
    Create a file in your Home directory (C:\Program Files\SAP BusinessObjects\Strategy Management\ApplicationServer\home) called BYPEg.txt.  Add the info at the bottom of this post.
    In PasAdmin, IDQL, run the commands:
    use HFPBM excl
    job BYPEg.txt;ext
    This example creates a logic (BYPeg) to perform some calculation, then defines a virtual variable called foo_index using that logic to selects only values that are below some threshold of UNITS_SOLD_CUST_TARDEV.
    remo logic BYPEg
    ...Copy Logic Terminal BYPEg
    OUTPUT temp.txt;ext over
    echo input testvar
    echo input thrshld
    echo result rslt
    echo SCALAR HoldVal
    echo BYPERIOD
    ...echo TEXT "Looping..."
    echo WHEN testvar LT thrshld
    echo     HoldVal = testvar
    echo ENDWHEN
    echo rslt = HoldVal
    ...echo DISPLAY UNITS_SOLD_CUST_TARDEV, HoldVal
    echo ENDBYPERIOD
    OUTPUT OFF
    COPY LOGIC temp.txt;ext BYPEg over
    Compile Logic BYPEg
    remo var foo_index
    cre var foo_index "Foo Index" by customer, product, store as BYPEg(UNITS_SOLD_CUST_TARDEV,1)
    sel var foo_index
    sel var plus UNITS_SOLD_CUST_TARDEV
    acro var down time
    list

  • Logic set up assistant, where is it in logic 8

    where is logic set up assistant in logic 8, it was in logic 7, and i found it usefull, where can i find it in logic 8 ?, please help, thanks

    Hi there,
    It doesn't exist any more. Although it might have helped with setting up MIDI devices, it never really pressed my buttons for that. The only real use for me was in automatically creating the environment and arrange page the way I wanted it.
    in Logic 8, you can create new tracks and Logic will automatically create them in the Environment for you. That was a neat way of solving the problem. Other things such as MIDI instruments was a bit facile and pretty much any MIDI instrument plays straight away nowadays. Likewise selecting I/Os, mono/stereo and so on are pretty easy to do and the default setup for Logic is clever enough not to leave you stranded.
    However, I agree that there are many, many things that you might want to set in Logic both at the program level and at the song level. However, Apple seem to have taken the view that a setup wizard to ask about all the settings in Preferences and Song Settings would be madness and the average newbie wouldn't understand many of them in any case.
    What part of the Setup Assistant would you like to see in place?
    Pete

  • Creating a score set - please help- I'm going crazy

    OK- deep breath ...........I'm trying to create a score set for 4 instruments. I read the manual, then tried everything on p 765........... I started first with the tracks in the Arrange area.- with and without rubber bands - and because this didn't work, I scrubbed this and tried to simply set up thew score in the Score Editor.
    It didn't work. I want to be able to see the music for 4 instruments - at one go -in the score editor. Is this possible ?
    Please someone save my sanity and give me an blow- by- blow account how to achieve this. I've been on this for hours and can't see the wood for the trees now so am going out for a breath of fresh air.
    Kay.

    You can look at the bottom of the arrange page.. But for 4 tracks I would open a score editor window by itself.. The score section is complex and not intuitive to say the least..
    In the score editor, click on the 6th from the left box. it looks like a page of text (when you highlite it will turn blue).. That shows you the whole score, in a tradional page format.. If you still see only one track, double click somewhere other than the track, (space in between). Page will toggle between showing one track/ and all tracks..
    To make life easier if you have many tracks to display = create a 'score set'. Label it, (band etc). reduce the size, 50 - 65% whatever. Then go under File in Logic, page set up.. Select the 90 turn, so now the pages longer side to side. You can see more measures at a time..
    You may want to have several score sets, to help with editing. One of everything. another to show just the piano and guitar, etc. This will make it easier to edit, copy paste between staves etc.
    The score editor is very powerful, if you take the time to figure it out, but documentation is vague

  • My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

    my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

    Hello Prakharfromindia,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Have a nice day,
    Mario

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • How to set F4 help for an inputfiled of BSP page?

    hi friends,
    I have to set F4 help for a Field in my BSP page. for this i am doing like this.
    Oninitialization Event....
    tables : t001p ,pa0001 ,t554t.
    data : begin of it,
            awart like t554t-awart,
            atext like t554t-atext,
           end of it.
    data : it_t554s like it occurs 0 with header line.
    parameter : k_pernr like pa0001-pernr.
    data : werks like pa0001-werks,
           btrtl like pa0001-btrtl,
           abs_grp like t001p-moabw.
    clear it_t554s.
    refresh it_t554s.
    select single werks btrtl into (werks ,btrtl) from pa0001
                        where pernr = K_pernr.
    select single moabw into abs_grp from t001p where
                              werks eq werks and btrtl eq btrtl.
    select awart atext from t554t into corresponding fields of it_t554s
                                   where moabw eq abs_grp..
    append it_t554s.
    endselect.
    now it_t554s contails the values to display F4 help in BSP page inputfield.
    how to assign this as F4 help to inputfield....
    I saw some threads. It's getting me to confuse...
    I am new to this topic...
    plz help me.........
    Regards,
    Shankar.

    solved

  • HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    Hi,
    Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    All media and apps should be in iTunes on the computer.  Simply select the content desired to sync to the device and sync it.
    FYI, backups have never included media or apps.
    Downloading past purchases from iTunes

  • I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • I have a iphone 6 wont take all calls says mail box not setup but is set up help please

    i have a i phone 6 wont take all calls says mail box not setup but is set up help please

    Hello ram tough,
    Thanks for the question. After reviewing your post, it sounds like the iPhone is not receiving some calls. Are you having trouble with visual voicemail? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't make or receive calls on your iPhone - Apple Support
    Get help with visual voicemail on your iPhone - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Wlserver.exe error occur while start the web logic server-please help

    hi
    Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
    Thannks in Advance,
    Cheers,
    bala...

    Could you please mail the errors and the WLS Version and service pack as well.
    - Ramkumar

  • How to code my logic in Search Help Exit

    Hi,
    I need to add my own Search Help say MATOG in Material MATNR Collective Search Help MAT1-> Collective Search help MAT1_A.
    Is it possible?
    And , when I need to add my own logic in Search Help exit for my particular Search Help, how should I code?
    Thanks,
    Shivaa..

    Hi,
    Go through below link, it gives you step by step approach in implementing search help exit.
    https://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits
    Regards,
    Raghavendra

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

  • I am having trouble printing  and am only getting part of the document which i have no margins set any help??

    i am having trouble printing  and am only getting part of the document  i have no margins set any help??

    What version of Pages?
    What Printer?
    If it is Pages '09, turn Comments off.
    Peter

Maybe you are looking for