Logic start up problems please help
Recently every time for no apparent reason at all when Logic 7.1.1 launches I seem to always get a Error code saying 'Error Code 1 was returned by Coreaudio.
I have downloaded the latest RME drivers for my Multiface version 1 but still i get the same problem.
I must say that once I click on the error continue button Logic opens as normal and I can proceed to have a good session with out any crashes.
I have also reinstalled logic a few times and trashed my prefs and caches but it still doesn't seem to matter.
if anyone can help please as I find it as very annoying
Hi,
Maybe you installed a new plug-in recently? I've gotten this message before when a plug-in is not quite compatible.
Cheers
Similar Messages
-
Starting tomcat problem, please help urgent
I installed jwsdp on windowsXP . The log file gives this following error when i try to start tomcat:
java.util.zip.ZipException: Access is denied
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:127)
at java.util.jar.JarFile.<init>(JarFile.java:138)
at java.util.jar.JarFile.<init>(JarFile.java:80)
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1081)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Bootstrap: Class loader creation threw exception
java.lang.IllegalArgumentException: addRepositoryInternal: java.util.zip.ZipException: Access is denied
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java:1109)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java:200)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java:202)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:141)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
PLEASE HELP ,URGENTLY NEEDED TO SHOW SOME WORK ON THIS.
THANKS
jimHi,
I have a similar problem, i try to deploy a JAR file built on AIX 5.2 platform (jvm 14.1) into Tomcat 5.5.7 running on Windows platform when i try start Tomcat it's fail with the fellowing message
SEVERE: Error deploying web application directory usi
java.lang.IllegalArgumentException
at java.util.zip.ZipInputStream.getUTF8String(ZipInputStream.java:299)
at java.util.zip.ZipInputStream.readLOC(ZipInputStream.java:238)
at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:73)
at java.util.jar.JarInputStream.<init>(JarInputStream.java:58)
at java.util.jar.JarInputStream.<init>(JarInputStream.java:43)
at org.apache.catalina.util.ExtensionValidator.getManifest(ExtensionValidator.java:368)
at org.apache.catalina.util.ExtensionValidator.validateApplication(ExtensionValidator.java:187)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3942)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:909)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:872)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1106)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1019)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1011)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:440)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409) -
Hp not starting serval problems please help
Hello, when i try to turn on my computer it says the following error :
Windows has encountered a problem communicating with a device connected to your computer This error can be caused by unplugging a removable storage device such as an external usb drive while the device is in use, or by faulty hardware such as a hard drive or cd-rom drive that is failing. Make sure any removable storage is properly conected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.
Status: 0xc00000e9
Info : an unexpected I/O error has occured
My laptop is a pavilion dv6
Please help me because i paid alot for this laptop
This question was solved.
View Solution.Replace your hard drive. A retail hdd can be used, just be sure to get one with at least as large a capacity as original in order to use HP Recovery Discs to install Windows. For instance if you have a 320gb a 500gb could be used but not a 250gb.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Very Strange Logic Studio Installing Problem, please help !
Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lotit is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010 -
IBook G3(Dual usb) Start up problem (Please Help asap....)
Like I have Write it on the title i have problem with my old ibook g3
It was working cool... so after one day when i try to turn it on.. It doesn't work... It make ''The startup sound'' after that only black screen .. sometimes it show a ''question mark'' on apple face and a apple icon
I have try different methodes but it doesn't work..
I have reset with PMU but still not work..
Please Tell me what do i have to do to fix it ..
Thnx Apple ..You don't remember what version of the OS is installed on it?
If it has Mac OS X 10.2 or later, you could try starting up in Safe Mode. If this works, it will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
Note: If the OS is earlier than Mac OS X 10.2, a Safe Boot is not an option. That is why I asked which version of the OS is installed.
If a Safe Boot into Safe Mode works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out.
Do you have access to another Mac with FireWire? If so, you could try starting up In _FireWire Target Disk Mode_ with the iBook as the target disk. If this works, it will act like an external hard drive to the other (host) computer and will enable you to retrieve data from the iBook and save it to the hard drive of the other (host) computer.
Without the system discs or knowing what version of the OS is installed, we are a bit stymied in helping you out. If a Safe Boot and/or resetting the PMU doesn't help, then you are going to have to take it in for repairs. (Please note: paying for repairs may cost more than the iBook is worth.)
Good luck. -
MSI GE70 2OE-029CZ Start-up problems, please help
Hello guys. My name is Mike and I need some help from you. Half year back I bought notebook MSI GE70 2OE-029CZ from Czech Republic and it wont boot up now. I used this notebook normally without problems until now. Four days back I finished my work and turned notebook off. Next day, after I came back home, I turned notebook on and suddenly it turned off after 4 seconds. It showed only MSI logo, I did not get in to bootloader. Then I turned it on again and same thing happened again. Except it was running only 1-2 seconds. After this notebook did not start up again. I have checked power supply with voltmeter and got suitable voltage. I did let the battery to discharge little over night and in the morning I tried to put it on charger. The battery diode lighted up. But still could not start it up. I already filled out MSI Service webform yesterday, but still did not get any response. Im just posting it here if someone of you has some idea i could try. Also does anyone got any idea why are mine audio jacks not golden? They are just black. I supposed they had to be golden plated. Sorry for my bad grammar, I am not born English speaker . Thank you for you help and time.
Hello,
I am sorry you experience this problem and probably I would be frustrated if such a thing would happen to me.
Sorry if I dis-read something, but have you tried turning the laptop ON without the battery just with charger? And other way around (with FULL battery but no charger)?
About HDD: you can take it out, but would be BEST if you make backup somewhere once you take it out and send it TOGETHER with the laptop, as the problem might be somewhere with the wires. -
Logic Pro X Problem please Help!
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
nenikos1 wrote:
Hello, I have an iMac 2013 with maverick IOS X 10.9.1.I bought Logic Pro X and sound card Alesis IO2express.I ll try to open an Audio track and i see the Input 1 but when i press create i can't see anymore the input 1 where i have my mic.Its No Inputs on the new track.I dont know what to do, i think i tried everything.Pls if someone knows tell me! I bought the programm 179euros and the sound card 104 euros and i cant use them.I have the Rode NT2 mic.Pls HELP
A known problem with the latest Apple updates.
It's all over this forum, take a look around. -
i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
When I connect the iphone does not start automatically Itunes Please help me
when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I havei've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works -
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
this is,we've encountered the following issues.
installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
please,help me!Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?
-
X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!
9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks. -
My iphone 5 32 gb has an camera autofocus problem, please help me solve this
my iphone 5 32 gb has an camera autofocus problem, please help me solve this
Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy -
P6N Lots of problems please help
P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.
Maybe you are looking for
-
SharePoint Foundation 2013 - Multi-tenant Install and OneDrive for Business with Yammer i
Hello, After installing SP Foundation 2013 (SP1) with Partitioned service applications we have noticed that while clicking on the "yammer and oneDrive" link the below error message comes up: _admin/yammerconfiguration.aspx any ideas?? http://technet.
-
Hi All, I am just trying to deploy my sample Portal Project Application from NWDS through Quick PAR upload into Portal Server, this is the first time i am getting this error, i don't know why The error is like below PAR upload failed: i did a
-
Downloaded John Mayer album bur one song is cut off at the end, how to fix??
-
Hi, I need to send the cost centers from one system to another. I want to use BD16 (IDOC) for the same but both these systems have different controlling area. BD16 works only when both the sender and receiver have same controlling area. Can you pleas
-
HIde Menu,System and Command Promt from transaction ivew
Hi, Our client has implemented SAP HR module, year back. Now they are implementing ESS and they have done some developments for CLAIMS in R/3 earlier. Now they want to see those claims in portal. For that we have created transactional iview. Its comi