Logic stops passing audio after a few hours

Here's the setup:
iMac G5 1.9Ghz, MOTU 828mkII, Logic Express, 10.4.4 (i think)
I am using logic to process audio for a theatrical production. I am using two channels in and two out. The problem is, when a track has been record enabled for a long time (several hours to a day or so) it stops passing audio. Ideally I would like to just leave it as is for the run of the show (about a week) but currently the tracks need to be rearmed before each show. Is this a normal limitation in logic?
The only thing I can think of is that it might be caused when the screen goes to sleep (although it doesn't happen every time, only when I come in the next day.) I do not want to leave the screen on for a week straight if I don't have to. Any ideas?

If you've had it less tha 90 days, contact Apple support. If you have Applecare, you can talk with them for up to 3 years, but hopefully that's not needed. In the US call 800-275-2273.

Similar Messages

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Macbook Air 13" Camera stops working after a few hours. Needs Restart to be functioning again. How do I fix this?

Hello!
The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
Any suggestions?

Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible?

Proxying from FMS to HTTP stops working after a few hours

Hi,
I'm using FMS Streaming 3.5.0 r405 on linux servers to stream videos with RTMP/RTMPT. We have decided to use the new proxying function to redirect HTTP requests to a Web server. We did not install the included Apache server, but used a lighttpd server installed on the same machines and configured to listen on port 81. So when a client connects with our player, it tries first RTMP, RTMPT and if it times out on these attemps, we try to go through with HTTP. FMS proxies the HTTP request received on port 80 to the lighttpd server on port 81.
My fms.ini file contains:
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = false
# IP (address and) port that Flash Media Server should proxy
# unknown HTTP requests to. Leave empty to disable proxying.
# With no address, specifies a localhost port.
# For example:
# HTTPPROXY.HOST = webfarm.example.com:80
HTTPPROXY.HOST = :81
This works well, but after a few hours, the HTTP proxy of FMS does not work anymore. Lighttpd is still responding on port 81. There is no error in all log files. Just stops working!
I have to restart FMS to enable again the tunnel. This behavior happens on all my streamers. Is it a bug or am I missing something?

Hi,
This is what I'm getting when using "ldd fmsedge"
root@wis-fms fms]# ldd fmsedge
linux-gate.so.1 => (0x006ba000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00a67000)
libasneu.so.1 => not found
librt.so.1 => /lib/librt.so.1 (0x0012a000)
libdl.so.2 => /lib/libdl.so.2 (0x00a61000)
libcap.so.1 => /lib/libcap.so.1 (0x00688000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00cc5000)
libm.so.6 => /lib/libm.so.6 (0x00a38000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00c3b000)
libc.so.6 => /lib/libc.so.6 (0x008f3000)
/lib/ld-linux.so.2 (0x008d5000)
[root
Alon

Why does my IPod shuffle stop after a few hours playing on shuffle when it should go for days?

Why does my IPod stop playing after a few hours on shuffle when it should play for days?

A few possibilities... (Each numbered item is a separate thing to check or try.)
(1) What does the shuffle's light do when you connect it to USB?
(2) If the docking cable plug is not fully inserted, it may not have a good connection for charging. Make sure the docking cable plug is fully inserted into the shuffle's headphones jack, as shown in this document
iPod shuffle (4th generation): Not seen in iTunes
(3) If there are other USB devices connected to your computer at the same time, try disconnecting other devices (including USB hub) so that the shuffle is the only device connected to a direct USB port, to see if that makes a difference (you can leave standard USB keyboard/mouse connected if used).
(4) If you have a USB power adapter (such as from an iPhone, iPad, or other device), that plugs into the wall outlet, as a test, connect the shuffle's docking cable to the adapter and connect the shuffle. Does it change from a power adapter?
(5) Some newer Windows PCs (if you use Windows and not a Mac) may have a "feature" that shuts off full power to the USB port when a connected storage device is no longer mounted by the system. An iPod is a storage device, and after syncing, iTunes unmounts the iPod's disk (if you are using automatic syncing). If Windows shuts off full power to the USB port, the battery cannot charge. To see if this is the problem, does the iPod appear in iTunes when it is connected, even though the battery is not charging? If it does, select the iPod in iTunes so that you see its Summary screen. There is an option (checkbox) there for Enable disk use. If it's not already checked, check that box and Apply. Enabling disk use keeps the iPod's disk mounted continuously, so Windows will keep the USB port at full power (and the battery will charge). If the iPod now charges, there may be a way to disable this "energy saver" feature in Control Panels, so that you can turn OFF Enable disk use. NOTE: When Enable disk use is turned ON, you need to Eject the iPod in iTunes before physically disconnecting it.

Wireless shows connected but stops working after a few hours?

Hi. I am having an issue with my linksys WRT160N v2 router. I have my desktop computer hardwired to my range extender (belkin E2S2400) which connects wirelessly to my router. The issue I am having is that after a few hours, especially if I am not on the computer, the wireless will stop working. Everything still shows connected and there is no evidence of a change except that anything I try to do (webpage, download, even the router itself) times out and says not available. It's as if the connection has somehow been put to sleep and is not being woken up.
This is despite having programs like bittorrent running in the background (seeding, not constant). I cannot find any settings to indicate sleeping or power issues or anything. If I reboot my range extender it works just fine. There is nothing on the range extender about going to sleep and it had no problem with my other router I was trying out. My other devices like my phone have no problem like this.
Any help is greatly appreciated!

It would be best to check if the WRT160N v.2 router has the latest firmware installed especially if you experienced the problem on all of your wireless devices. If ever you have the latest firmware installed on your router please try to check on your current wireless security settings especially the wireless channel, you may set it to 1,6, 9 or 11.

Skype 7.7 stops working after a few hours

After a few hours maybe 6 hours or so, skype will not let me get on calls. If I try to get on a call skype immediately stops working. I am using Windows 10 and I tried uninstalling it and reinstalling it but that has not worked.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

AirPlay on express stops after a few hours

I have noticed lately that when I am streaming music to the speakers that are connected to my express that the music suddenly stops after a few hours. It's done this a few times now, and every time I have to unplug it to reset it and it works again. Is there a setting I missed out on when I set up the express? Or is it a setting in iTunes that meters how long music can be streamed?

Hi dmule, I just replied to another topic here about this, I know you were involved in it but just in case you don't get notified I thought I should cross-link it here.
Cheers
Ollie

Smb network shares from W7 PC stop working after a few hours

I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out, and i am unable to connect to it unless i restart my macbook.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
sounds similar to a problem with the 10.6 server, where smb crashes.
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
computer_tim

computer_tim wrote:
I have a W7 pc sharing storage on my network.
when connecting when first starting my macbook, it connects fine, but after a few hours it drops out,
That's normal. Connections to non-server Windows machines will drop after a period of non-use.
and i am unable to connect to it unless i restart my macbook.
That's not normal. You should be able to reconnect at will.
I have been using "connect to server" to connect my network shares, and when i try to reconnect them using this, it just keeps trying to connect, and wont ever connect even after leaving it to try for over 4 hours (connecting when first starting is fine, taking less than a minute).
There's a network connectivity problem. That is not how things are supposed to work.
sounds similar to a problem with the 10.6 server, where smb crashes.
Okay, you definitely have a network connectivity problem. OS X Server is not supposed to behave that way. What kind of network infrastructure do you have? What make/model routers, switches, hubs, whatever? WIred/wireless? What class cabling or if wireless, what class wireless?
is there a way to restart smb service on the macbook, or even fix it, so that it doesnt have to always be reconnected?
Yes. Usually you just disconnect and reconnect at will.
computer_tim

A few thoughts and experiences after a few hours using my new ThinkPad E440 with Win 8.1

After waiting 36 days for my new ThinkPad to arrive, I guess I'm just "eh" about it after using it some. Here are some of my thoughts, opinions, and experiences I've had after using it for a few hours... Hope this helps other people.
I should not be surprised because I read all the reviews, but the touch pad really sucks. I hate everything about it, the way it clicks - it's so loud and clunky! - and it's insensitivity (and I adjusted this to be more sensitive). Thank goodness for the track point. I love that thing.
The touchscreen stopped working after a few hours of use. After I rebooted it came back. Is this a bad omen? Or did I inadvertantly turn it off? Is that even possible? I am new to Windows 8 so anything is possible.
The touch screen, when it's working, is not very responsive. It's MUCH LESS responsive than my Samsung Galaxy Note 2 Android phone or my LG G Pad 8.3 tablet. This is very disappointing.
I ran the hardware scan that is in the Lenovo Solution Center and got a warning under the category "Local Connection Test". I looked at the list of System Events and it's very long. The first application error event name is MpTelemetry. Response is "Not available". The next one is "PnPRequestAdditionalSoftware". Response is "Not available". And the list goes on and on and on for pages. I have no idea what to do about this or what it means.
Also in the Lenovo Solution Center, under Software, there is a Critical Alert that says I never updated Windows. But I did when it prompted me to while it was first booting up and it was updating and installing things. Where it says "To update your operating system, you must run Windows Update", I click on the Launch button and it takes me to Windows Update where it says No Updates are Available. Go figure. It also says there have been 9 Windows updates made to the computer. I guess I'll have to just always ignore that Critical Alert.
In the system tray, it says "ThinkPad OneLink Dock Detached!". I don't have a dock... So, yes, that's true, it is detached. I'll have to hide that one.
I realize there is a Lenovo Recovery Partition on the hard drive but I would really like to create a set of recovery disks before I start customizing this thing, installing apps, and moving my files over. I can't find anything that tells me how to do it. Under the control panel, there is the Recovery icon. The only choice there for creating recovery media is to create a Recovery Drive, not disks. I'll post a separate item to get information on this.
On the positive side, I have had it in my lap the whole time and it's not gotten too hot for my legs. That's a big improvement on my old Toshiba Satellite Pro.
This locating the Fn key to the left of the CTRL key decision must have been made by someone smoking crack. Why would anyone in their right mind want to do this? We've had the CTRL key on the outer left edge like, FOREVER, why move it now?? This will be something that will take me a long time to adjust to - if I ever do. I use the CTRL a lot for cutting, pasting, and formatting things in Excel and Word. It's going to be a battle. I wonder if any software exists that allows you to redefine the keys? Speaking of location of keys, I keep hitting the Page Down key when I want the Page Up key. I'm used to the Page Up key being above the Page Down key instead of to the left.
After being told here in the forum that the fingerprint reader was not an option in the US I am pleasantly surprised to see one on my new ThinkPad.
I use the right-click on my mouse often. For example, to open a link in a new tab instead of switching to the new URL. For some reason, when I click on the right part of the touch pad when the mouse is located over a link, it just opens the new URL instead of giving me options for opening the URL. I'll have to figure this out.
So anyway, I guess that's more than a few things... hope this is useful to someone...

You can change FN and CTRL key in the BIOS

Just installed thunderbird on new computer having used it for years on old laptop. Why do my mails disappear from my inbox after a few hours. Can I change this?

I had Windows Xp on the old laptop and used Thunderbird for ages, but have now installed the same version of Thunderbird on a new laptop with windows 8.1 and it is quite different. How can I stop it removing the contents of my inbox after a few hours. Its very frustrating when you dont want to reply to an e mail immediately but lose it overnight!

http://kb.mozillazine.org/Disappearing_mail

Dv5t-1000 CTO Sound sputters and OS slows down after a few hours

I am running Vista 32bit SP1 on a DV5T-1000 CTO machine, 4gb ram 2.0ghz c2d
I've noticed that after a few hours of use, usually after I leave the machine on alone and coming back to it, the sound completely degrades and the OS response completely slows down to a crawl. It is especially prominent if I go to something like youtube and watch a video. the whole thing sputters and stutters and sounds horrible and the os slows to a crawl.
however, if I pause the video, until it's fully loaded, THEN play it, all is well, and my OS goes back to full speed...
but the longer I leave my PC on the WORSE it gets. if I leave it overnight, and come back in the morning, the result is horrible. I have an audio alert to notify me if I have email. normally it just does a quick 'beeep-booop, taking about a quarter of a second' as it flashes the message in the corner. If i leave the machine on over night, the next morning the message will go 'b-e-e-e-e-e-e-e-e-e-e-e-e-p-p-p-p-p-p b-b-b-b-o-o-o-o-o-o-p-p-p-p-' and takes about 5 seconds to complete the notification!
At this point, if I try to restart the computer, or shut it down from the start menu, it does nothing. I go to start select restart, nothing. I go to start, select shutdown, nothing. I have to physically hold down the power button and kill the computer!
I've updated to all the latest drivers for all my components straight of the h-p site. I even tried upgrading my nvidia drivers to the latest from nvidia.com. that didn't work so I reverted back to the h-p ones (from LAST YEAR by the way, can we get an UPDATE!)
so please, tell me WHAT GIVES! In addition to using my computer for daily activities, I also produce music on it. And if I use my pc for more than 2 hours, and I want to work on music, I have to reboot or suffer as my computer completely locks up.
PS. this thing says I cant make a word using the letters h and p... is this a JOKE?!?!?!?!?!?!

sorry about my tone, I don't realize how I sound when I'm typing, though I do think it's ridiculous that a forum about h-p doesn't allow you SAY h-p
anyway, I'm still at a loss for what to do, and it just occured to me that this may not be the place to get official help. are there h-p people here? or should I be contacting support? I have a feeling all they're going to tell me is to update the drivers...

Logic stopped playing audio

Hello everybody, this is a vital question.
After the latest security update, logic stopped playing audio. After a short debug I discovered that core audio doesn't show any external interface anymore, so any other song is affected. I dont know if the security update is related... Anyways Logic is gone and my songs too!!!
Audio-Midi configuration, as well as the interface related control panels, work as expected and audio is correctly played by the finder. All other software which makes use of core audio (e.g. Bias Peak) works.
My interfaces are AVID M-Audio Fast Track Ultra and, for this testing purposes, M-Audio Audiosport Duo (legacy), all with the latest drivers.
Obviously my Logic is officially bought from the App Store.
MacPro (late 2007) 7GB RAM 2 x 2,66Ghz Dual Core Intel Xeon
Mac OS X 10.7.5 (latest update)
Logic Pro 9.1.8 (1700.67) 32 bit (latest update)
AVID M-Audio Fast Track Ultra with 2.2.2 firmware (latest update)

Hey icedj,
I had that happen. I had to trash my Logic prefs, then restart Logic. It's a P.I.T.A. because you lose various settings (color settings, for instance), but it fixed the problem for me.
Bamboof
Vallejo, CA

HP software loses connection to printer after a few hours

I have been having this problem since I bought my HP Deskjet 3052A a few months ago. There is a program in my Startup folder called "Monitor Ink Alerts - HP Deskjet 3050A J611 Series (Network)." It works fine when I start up my PC, but invariably after a few hours, I will get a message (and an icon in the system tray) saying that it has lost connection to the printer (I do not have the exact message at this time). The message also says that wireless scanning is not available. At that point, my PC will not print to the printer, although wireless devices using HP ePrint still are able to print. Restarting the PC will fix the error. I have set the printer up with a static IP address to try and fix the issue, but it continues to reoccur.
My PC is a Dell Dimension E520 running Windows XP Media Center Edition Version 2002, Service Pack 3. It is connected via network cable to my Netgear N600 Wireless Dual Band Gigabit Router model WNDR3700. The printer is connected via wireless to the same router.

I too have this problem and for no apparent reason. The only thing I can link it to is, if I print a letter and then go into mail merge to print the envelope it allows me to print the envelope(s) but then loses the wireless connection when I go back into trying to print letters.
It really is a pain because I have to stop what I am doing and spend time going through the set up procedure again. Not difficult (except for the faff of having to take the printer to the pc and connecting the USB again) but time consuming and very disruptive to my working day.
I have another problem with printing a document and getting gobblygook, but that's for another thread and I will search for this.

L2TP Remote Access disconnects after a few hours.

Have a few users on Vista/7 using Windows L2TP to connect to our ASA5510. It is reported that after a few hours the connection drops. From what I have seen this can be anywhere around 5-6 hours. Of course my connection will drop after an amount of time has passed and no traffic has passed the tunnel. But the users are adament that this drops during large transfers; i.e. not a timeout issue.
Before I spend anymore time on this I just want to know if this is normal behavior for a remote access L2TP using Windows to disconnect on it's own after this amount of time. Never had a reason myself to remain connected that long, and when I did I used a site 2 site tunnel.

Below is a sample log of the time when disconnects occur, I highlighted in bold the problem area.
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec SA payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec nonce payload
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing proxy ID
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Transmitting Proxy Id: Remote host: 76.17.XX.XX Protocol 17 Port 0 Local host: 216.XX.XXX.XXX Protocol 17 Port 1701
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing NAT-Original-Address payload
vpn-7-713171: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, NAT-Traversal sending NAT-Original-Address payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-714005: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Responder sending 2nd QM pkt: msg id = 00000017
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=17) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NAT-OA (131) + NONE (0) total length : 172
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=958052a1) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing delete
vpn-7-713170: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Received delete for rekeyed centry IKE peer: 76.17.XX.XX, centry addr: ad03bb38, msgid: 0x00000016
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, L2TP/IPSec: Ignoring delete to a rekeyed centry (msgid=16)
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=17) with payloads : HDR + HASH (8) + NONE (0) total length : 52
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, loading all IPSEC SAs
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-5-713049: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Security negotiation complete for User (sam5510) Responder, Inbound SPI = 0xc8ed80c2, Outbound SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An outbound remote access SA (SPI= 0xE007E1FD) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715007: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE got a KEY_ADD msg for SA: SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An inbound remote access SA (SPI= 0xC8ED80C2) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715077: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Pitcher: received KEY_UPDATE, spi 0xc8ed80c2
vpn-7-715080: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Starting P2 rekey timer: 3420 seconds.
vpn-5-713120: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, PHASE 2 COMPLETED (msgid=00000017)
vpn-7-713906: IKEQM_Active() Add L2TP classification rules: ip <76.17.XX.XX> mask <0xFFFFFFFF> port <4500>
vpn-7-715077: Pitcher: received KEY_SA_ACTIVE, spi 0xc8ed80c2
vpn-7-713906: KEY_SA_ACTIVE old rekey centry found with new spi 0xc8ed80c2
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, sending delete/delete with reason message
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing blank hash payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec delete payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=d84b3b70) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Active unit activates new SA for remote peer 76.17.XX.XX.
vpn-7-715009: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Deleting SA: Remote Proxy 76.17.XX.XX, Local Proxy 216.XX.XXX.XXX
vpn-6-602304: IPSEC: An outbound remote access SA (SPI= 0xFD65F940) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-6-602304: IPSEC: An inbound remote access SA (SPI= 0xB2891595) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-7-715077: Pitcher: received key delete msg, spi 0xb2891595
vpn-4-713903: IKE Receiver: Runt ISAKMP packet discarded on Port 4500 from 76.17.XX.XX:4500

Logic stops passing audio after a few hours

Similar Messages

Maybe you are looking for