Logic Studio 2009 Educational Terms of Use

I am considering the purchase of Logic Studio 2009 from my University, but before I do, I have a question. Are there any terms binding me from commercializing my work on the educational version - ie can I legally sell my work created from this student license?
Another question I have is: Will I be able to upgrade to newer versions (when they come out) with the educational license?

tekneeq wrote:
I am considering the purchase of Logic Studio 2009 from my University, but before I do, I have a question. Are there any terms binding me from commercializing my work on the educational version - ie can I legally sell my work created from this student license?
Yes.
Another question I have is: Will I be able to upgrade to newer versions (when they come out) with the educational license?
No.

Similar Messages

Logic Studio 2.0 purchased off Ebay... came with Logic Express 9 upgrade instead of full version, serial works to unlock registration but seems wrong and perhaps a loophole. What should I do?

I purchased what was advertised as a Full Version of Logic Studio 2 off ebay. It ended up being Logic Studio Pro 2 Upgrade and came with a copy of Logic Express 9 upgrade which did unlock the installation. I didn't realize it was the upgrade version til I saw the sticker in the upright corner of the box post installation. I feel like this is a loophole and not a legitimate installation now. Is this legit or should I acquire a full copy of Logic Express? The seller continously tells me that it's 100% legal and legit, etc.. I have already demanded he should send me or reimburse me enough to acquire a legitimate copy of Logic Express that supports the upgrade. Am I right in doing so? Or is it okay to use the Logic Express 9 upgrade copy to upgrade to Logic Studio Pro 2? Doesn't seem right. I'm very confused and would love some advice. Thank you in advance.

The Logic Express 9 upgrade package requires you should own Logic Express 8 Full.... for that to be a legal use of the Logic Express 9 upgrade serial which then you could use to register LP9/Logic Studio 2.0 upgrade package using the LS2.0 upgrade serial..
This is an apparent loophole, in my opinion, that is being exploited by the seller....
However, when in any doubt with anything regarding possible legal issues... contact Apple directly and ask them for their advice/opinion on the matter.
http://www.apple.com/contact/
Cheers!

Apogee ensemble and logic studio

I got a new apple desktop pro quad 2.66 and Logic Studio.
I have been using a Motu 828mk11 and logic 7 pro.
I was considering using the Apogee Ensemble and was wondering if anyone using Studio has any luck with Ensemble and if they think the switch would be worth the investment.
I also Use an API A2D preamp with the digital outs.....any news on how that might work with Ensemble?
anyway, just a note, if anyone cares, the UAD Nevana X2 works really tightly with Logic Studio and its WORTH the purchase price. amazing.

Respiro wrote:
saved through it as wavs?
If you use outboard gear for mix and processing i.e you route out your Software Instruments thru some of the Apogee outputs (analog/optical or digital), process them using some external analog or DSP processors and route back the processed sound to the Apogee Inputs ( i.e Logic Mix track ), then the mix may be different, rather than the Logic native Bounce.
If you use Logic bounce, then Apogee is just a monitoring device as was mentioned before. I agree if you have several devices and play same (previously) bounced Logic audio file thru the different devices they may sound different - this the test the audio engineers make in the laboratories.
Personally I own several devices and I prefer to use one for final mix monitoring (which is most "true" not "sweet or pumped"), some for recording, other for internal DSP processing, depends on the situation...
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Recording Interfaces that work with Logic Studio

Hey there! I'm pretty much a noob to Logic Studio. I've been using garageband and reason 4 before that. I've had an M-Audio Fast Track that worked alright with Garageband, but it won't work with Logic, at least for me. I did some research and found out that this happened for most people.
So I was wondering, what's a good recording interface that would work well with Logic (which should then work with garageband) that works very well and worth the money that's paid for it?
Specs:
Macbook Pro
version 10.5.2
2.4 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM
Thanks alot.

Welcome to the forum jareddddddd, i do believe the problem your having with the M-Audio is the the drivers for intel, at the moment are Beta drivers.
Beta meaning they are going thought testing and isn't official drivers, therefore it might work or it might not.
As flood123 said the Duet will be much better, compare to low end M-Audio interface, which will sound far better and integrates well with Logic.
Also Fire-Face by R.M.E is a good interface, almost forget to mention Lavry interface which sounds way better than the two already mention that's only my opinion though.
Personally i have found it to be my preferred choice compare to Apogee low end interface that hasn't got the C77 clock work that Apogee flag-ship interface has, such as the Rossette 800 and AD/DA 16 carries.
Try and find a local music store and try out a few interface that is hook-up to L.P. by Fire wire and maybe you'll have a better choice in choosing.
Fr.BlayZay.

Logic Studio tips

Does anyone have good information regarding Logic Studio (Logic 9)?
Just installing on my re-purposed iMac.

OK,let me be specific...I'm new to Logic Studio. I've been using a stand-alone digital workstation for recording for 15 years.
I recently upgraded to Logic Studio. The interface I'm using is the Fast Track by M-Audio.
After initial set-up (a friend of mine who has used Logic 7 for years was helping me). We built templates for recording and tried to do a sample recording using the above with a small mixer plugged in. We attempted to use a microphone, then a bass guitar to try and get signal to the Logic software.
The fast track was recognized by Logic (we could see signal on the output bus but not on the input). Tried several times and did finally get a signal but it was overdriven. As I'm still in the set-up mode of this, does anyone have suggestions for what interface to use with Logic Studio that works well?
I'm open to getting different gear if it's what Logic wants. Yes, we checked the cables, re-checked that the input devices were seen, etc.
Basically is there a preferred set-up for this software? I'd appreciate any help. --Mike

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

What is the best external drive to use with logic studio?

I want to get Logic studio, but don't have enough hard drive space on my 2009 IMac, running Snow Leopard. What is the best, most efficient, external hard drive for this purpose?

What you want to look for is not so much a fast drive, although that is desirable, but a seperate buss to run it from. What i/o do you have on your iMac?
Shattuck

Installing and Using Logic Studio and Final Cut Studio 2 On the Same iMac

In March of this year, I switched from being a long-time user of PC's to a 24 in. 2.4 GHZ iMac. In late May I purchased Final Cut Studio 2 and Aperture and have greatly enjoyed using both of these applications on my iMac. Both run with no problems under Leopard which I installed shortly after it came out. I am now considering the purchase of Logic Studio since I have enjoyed midi sequencing and audio editing for years on my PC's but wish now to do this on my iMac.
I note that two of the applications included in Logic Studio (Soundtrack Pro 2 and Compressor 3) are a part of the Final Cut Studio 2 suite of programs that I already have installed on my iMac. How will Logic Studio handle this issue when I run the install of that software, i.e. will it be aware that I already have Soundtrack Pro 2 and Compressor 3 and just have those install options grayed out or will it overwrite my FCS2 installation of those two applications? Are there other issues or conflicts between Aperture or Final Cut Studio 2 applications and Logic Studio that I should know before installing Logic Studio?
Thank you very much in advance for responding, and I look forward to reading this forum from this point onward.
Tom

Thanks again for your prompt responses, blayzay. I look forward to getting and installing Logic Studio. If anyone has any precautions on using it with FCS2 or with Leopard, please add a comment to this thread.
Tom

Installing and Using Logic Studio on the Same iMac as Final Cut Studio 2

In March of this year, I switched from being a long-time user of PC's to a 24 in. 2.4 GHZ iMac. In late May I purchased Final Cut Studio 2 and Aperture and have greatly enjoyed using both of these applications on my iMac. Both run with no problems under Leopard which I installed shortly after it came out. I am now considering the purchase of Logic Studio since I have enjoyed midi sequencing and audio editing for years on my PC's but wish now to do this on my iMac.
I note that two of the applications included in Logic Studio (Soundtrack Pro 2 and Compressor 3) are a part of the Final Cut Studio 2 suite of programs that I already have installed on my iMac. How will Logic Studio handle this issue when I run the install of that software, i.e. will it be aware that I already have Soundtrack Pro 2 and Compressor 3 and just have those install options grayed out or will it overwrite my FCS2 installation of those two applications? Are there other issues or conflicts between Aperture or Final Cut Studio 2 applications and Logic Studio that I should know before installing Logic Studio?
Thank you very much in advance for responding, and I look forward to reading this forum from this point onward.
Tom

Thanks again for your prompt responses, blayzay. I look forward to getting and installing Logic Studio. If anyone has any precautions on using it with FCS2 or with Leopard, please add a comment to this thread.
Tom

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion. Use the program Pacifist to install it.

I bought logic studio 8 used, how can I register it to my name?, I bought logic studio 8 used, how can I register it to my name?

I bought this Logic studio 8 from craigs list, the guy who sold it to me said he never registered the program but I asume he installed it in his mac which he also said that it crashed and that was the reason to get rid of logic since he is using a pc now.
He gave me the box with the serial numbers and prod ID as well as the manuals and dvds which I took and installed in my mac laptop so my question is, can I register this software to my name and how does this works?
I know you can only install it in a desktop and a laptop belonging to only one owner.

Thanks KiltedTim.
I know a person who usedit for couple of months and now he would like to sell it.
I want to know if anyone can use it in India. When I say "use" that means download apps and purchase music from the store.
I am asking this because that Iphone ll be registered in USA.

How to use the Optical in on 002r with Logic Studio?

Hi there
i'm trying to figure out a problem that i really can't find a solution,i'm using Logic studio 8 whith Digi 002rack and 7.4 core audio version,my question is how to select in logic the optical IN of the 002r that in my case is connected to my triton rack synth?
i can use the spdif in of the 002 but i can't find a way to use the optical in.
thanks all

I dont know if you will be able to connect other device like PS3 or Wii.
As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
I presume this is possible due to connection of Microsoft products; MCE and Xbox360
To be honest; why you dont take a look into the user manual if this notebook is new to you?
All details are mentioned in the user manual which is already preinstalled on the notebook.

Is anybody using Scarbee Imperial Drums XL in Logic Studio?

Hey all. Nearing the end of my migration from G5 to Mac Pro. I'm fine with giving up some of my legacy plugins, but would find it hard to live without this one. Is anybody successfully using this plugin in Logic Studio? If so, if you could share your installation procedure it would be appreciated. Thanks.

Okay, I'll take that as a no. I tried various ways to install the component file and the Halion updaters, but nothing works. Bummer. I do have a Kontakt 1.52 version lurking in my old download files, so I'll give that one a go. I'll be surprised if all the clever programming from the Halion version works (especially the modwheel-controlled hi-hat), but we'll see.

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009 ,NI DAQ 7.01 and Field Point 6.05.

I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Logic Studio 2009 Educational Terms of Use

Similar Messages

Maybe you are looking for