Logic studio 8 doesn't work on new mbp, 500€ trashed...

hello, 6 years ago i bought a mbp in order to install logic pro. with the whole value of 3500€, but few months ago my video card has gone, mbp can not be repaired. so i bought my new mbp of 3000€. Unfortunately Logic 8 cannot be installed on my new mbp. how should i do? Marco

You would also want to read this:
https://discussions.apple.com/thread/4636628?start=15&tstart=0
Cheers!

Similar Messages

Original ADC 22" Cinema Display Works w/new MBP, doesn't with older one

I have two MacBook Pros. One is from late 2007. Core 2 Duo, max 3 gigs of RAM, non-unibody. The second is from late 2009. Unibody, max 8 gigs RAM, etc.
I also have two Apple Cinema Displays. One is 22", ADC. The other is 23", also ADC. I have ADC->DVI adaptors for both.
When I plug either of the two MBPs into my 23" display, it works perfectly. Auto-detects, screen flashes and resizes and wiggles a bit and everything just works exactly as expected.
When I plug the newer (2009) MacBook Pro into the 22" display, it also works perfectly.
When I plug the older (2007) MacBook Pro into the 22" display, nothing happens. No flicker, no screen shift, no work. No lines written to the system.log file, no indication that the laptop even notices that it's plugged in.
Here is a list of troubleshooting steps I have tried. (Please don't ask me to try any of these.)
* As noted above, I tried the 22" display with the newer laptop. Works fine.
* As noted above, I tried the 23" display with the older laptop. Works fine.
* Tried plugging the display into the laptop while the laptop was off, then turning it on.
* Tried plugging the display into the laptop while laptop was asleep, then waking it.
* Tried plugging the display into the laptop while laptop was awake.
* Tried pushing the display power button while it was plugged into the laptop.
* Tried the 'detect displays' button in the System Preferences.
* Tried zapping the PRAM
* Tried resetting the power management unit.
* Tried unplugging/replugging display power while connected to the laptop.
* Tried swapping the two power (ADC->DVI) adaptors.
(The problem follows the LCD, not the adaptor.) Also, just to add to the mix, I have tried plugging ANOTHER vintage 2007 MacBook Pro into this 22" display, and it also displayed the same symptoms: absolutely did not recognize the display, no matter what I did.
I find this really baffling. Why (HOW?) would the original Apple Cinema Display be incompatible with the 2007 MacBook Pro? Or what defect would make the Cinema Display not work with the 2007 MacBook Pro, but work fine with the 2009 MacBook Pro? The only difference I know of aside from a different video chip is the fact that the newer MBP requires an extra adaptor to get from DVI to the mini display port thingie.

I wonder whether you've solved this problem. I have the same issue with my MBP. The 20" Apple Cinema Display is connected through an ADC/DVI converter to a DVI KVM switchbox. It works fine with my G5 tower, but ever since I installed Leopard, it doesn't work on the MBP (in fact, if I plug it in the computer crashes). It worked fine before. I brought the MBP to the Genius Bar, and it worked fine there connected to a regular DVI monitor.

SessionManager doesn't work with new xerceimpl.jar?

Hi,
Does anybody know the solution to the problem below?
The toplink sessionmanager, which loads sessions.xml for database session pooling, doesn't work with new xerce parser(xerceimpl.jar). It is tieing to old xerces.jar parser, which has been upgraded to have more functions.
Thank you in advance.
Praveen

Hi Raanan,
It works with old xerces.jar. But in-order to get new functions from new xerces jars from apache, I got xml-apis.jar, xercesImp.jar. They got modified from old ones. So this is breaking toplink sessions.xml load to work.
Did you face this problem?
Thanks
Praveen

Does Logic Studio v.2.1 work with "any" intel processor?

Does Logic Studio v.2.1 work with "any" intel processor?

Any Intel CPU that Apple ships or has shipped. What do you expect? 80286?
If you asked for a recommendation: i7 with 8 cores works great.

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

Urgent-logic serial number won't work on new MacBook Pro

Just purchased a new MacBook Pro & did Migration Assistant. Logic now asks for my serial number, I punch it in and get a Invalid Serial Number dialog box. Whats up with this, my Logic Studio package is 2 years old and correct. Help!

HI, I had logic pro support on the telepone, and he said I had reversed the last two letters,I am not normally dyslecsic but he saved me because he was using shared screen,a fine thing at times like that.
This is almost a year ago, I hope you got it working!

Apple remote 8.0.2 Logic Pro 8 doesn´t work

I got 8.0.2 Logic Pro 8 on a Mac Mini with 10.6.8
The remote doesn´t work.wasn´t this issue fixed?
Its not the pairing, its not the battery, i got three apple remotes (I guess it was wasted money) and they do work on other programs but not Logic as they should. This is a clean installation without any unnecesseary stuff. Its a studio only.
Does anyone have any idea or solution?
Thanks!

I found my solution to historical data. The "Share Data" area shows your data source with a statement that "When multiple sources (e.g. iPhone, manual, pedometer) are available, one data source will be chosen based on the priority order listed above". So, when iPhone was listed above manual data entry, my attempts to enter data manually were stymied. I don't know how to rearrange the order. For walking, I would think the iPhone could track steps and then if one walked four laps without the iPhone, he should be able to manually enter that mile as well. Don't know, though, how you avoid double coverage if you jog with the iPhone AND enter manually.

Logic studio V2 won't work on my OSX Mountain Lion MBA

Hi All,
I have a newer MBA and bought an older copy of Logic Studio V2. Now that I have installed the program, Logic Pro says it can't open as it only works with Power PC processors.
Any idea what I can do to get this program to work? If I buy the upgrade, will it work?
I don't want to return this product, and I want to get it to work so any assistance would be greatly appreciated.
Best Regards,
Heath

Hi
You need to run Software update to get to at least v9.1.7
http://support.apple.com/kb/HT5421
Note that the Logic application must be a) in your Applications folder, and NOT in any other sub-folder, and b) it must be named "Logic Pro" with no spaces or numbers.
CCT

Soundtrack Pro, with Logic Studio. app will not work, while Garage Band is present on my iMac?

Still new to Logic Pro. Got the Soundtrack Pro when i bought the Logic Studio. am i to understand that this app will not work, while Garage Band is present on my iMac?
if this is true, i'd welcome any suggestions. do i have to delete GarageBand on current machine which has Logic Pro?
appreciate any help
thanks,

My MacPro w/ OSX 10.6.8 runs GarageBand, SoundtrackPro and Logic 9 (Express) without issues.
Everything was installed fresh - ie no overwrite OS upgrades and no app version overwrite upgrades.
Just so we are clear - an UPGRADE would be from OSX 5 to 6 or from Logic 8 to 9 and involves a purchase. UPDATES are those decimal increments - 10.6.7 to 10.6.8 or Logic 9.1.3 to 9.1.6 that are free.
Sometimes the sequence of installs can make a difference.
Good luck,
x

Video clips doesn't work in new keynote

I recently upgraded keynote after installing os x maverick.
When I opened my previous keynote presentation, the new keynote asked to upgrade the movie quality.
And you have to click this option, otherwise the video clips will only come out as pictures.
But now, some of the video clips doesn't work. The thing is, I do not have the original video files as these are presentations given to me by others.
What's next for me?

Having the same problem, would greatlyu appreciate a fix. does it matter if one upgrades to the iOS or Mac Keynote options?

Safari doesn't work after new Installation of Lion

Hello,
I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
-Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
-VLC Media Player does not work as well
Any idea anyone?
thx
Mohammad

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

Wireless Music doesn't work with new software

Hello-
I can't get my wireless music to work after I update the software to the latest version. The only one that will work is when I install it from the CD. But, I would like to use the most recent version of the software. As soon as I update, the Media Server won't launch on my computer. I am using a linksys WRT54G wireless router. If I check DHCP clients, the wireless music receiver is successfully getting an IP address. I have tried all of the things that linksys suggested (disable WEP, firewall, broadcast SSID, etc...) to no avail. Has anyone gotten the latest media server software to work with WRT54G? I have tried it on both my XP and W2K machine, with the same results (doesn't work).
Thanks,
Rich

Hi Jeremy
I have the similar problem, I've installed the software on my desktop, no error messages (apart from the certificate) and everything seems to be fine. After about 2 minutes the message appears that the network is not ready and consequently the media server is not running.
Without the server running I can't setup the Network and the entire system is not working. I could ping it but that was about it.
I've reset my router, renamed the SSID, tried with and without WEP, MAC, without firewall, opened a new account on my desktop with admin rights installed the software again into a new folder - result still not working, same error message.
To make really bad, I installed it on my laptop, same procedure and it works fine! So it seem that it has nothing to do with my wireless devices or configurations, there must be a problem while setting up the software on my desktop.
I really would appreciate your help a lot!

Cheers

Balz

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Logic studio 8 doesn't work on new mbp, 500€ trashed...

Similar Messages

Maybe you are looking for