Logic studio 9.11 with macbook pro 2.4 gig i5 performance

Hi All,
I recently moved from a ppc 2.0 gig to a macbook pro 2.4 gig with 4 gig of ram and i5 chip with logic 9.11. I went to bounce maybe 3 midi tracks with a compressor and reverb and the cpu meter went all the way into the red? Is there something wrong? I had at one time bounced 75 tracks with a 2.0gig ppc mac and 5 gig of ram with au plugs. What's wrong?

it should go into the red
I just want to emphasize this. If it didn't go in the red, that would mean that Logic wasn't doing everything it could to use all available power to make the offline bounce complete as quickly as possible.

Similar Messages

  • I cannot load logic studio into my retina macbook pro from disc

    I am trying to load logic studio from the upgrade discs that I brought when it first came out and it's not loading on my retina macbook pro. I'm loading it through the external superdrive. any help would be great.

    Could it be because you are trying to install from upgrade discs?  Do you have the installation media for whatever version you upgraded from?  If so, you might try installing that version and then doing the upgrade installation over that.

  • What logic boards are compatable with macbook pro mid 2010

    i'm just curious about what logic boards are compatable with my macbook pro mid 2010?  didn't know if i needed to stay within the same year or if there are others that would work with mid 2010 layout inside the casing.  right now i have 2.4 GHz Intel Core 2 Duo and NVIDIA GeForce 320M 256 MB and really looking to upgrade this if i can find one online from a mac with a broken screen or some defect with the logic board intact. 

    Rather than the Samsung EVO, I would get a Crucial M500 series - http://www.amazon.co.uk/Crucial-960GB-Solid-State-Drive/dp/B00BQ8RGL6/ref=pd_sim _computers_5 - they just seem to 'play well' with Macs where some people have reported problems with Macs and the EVO series.
    Good luck,
    Clinton

  • UNABLE TO INSTALL LOGIC STUDIO 8 on NEW MACBOOK PRO

    anyone have any ideas why ?
    It gets to the last 2 minutes and hangs up at that point for hours .

    Hello, M2.
    A few ideas. 1 Is the install disc faulty? 2 Have you got all the system u/dates on your mac? Should 10.5.8 for leopard. or 10.6.2 for snow. Do you have the latest drivers for your audio interface? Ols ones can sometimes [although its unlikely] cause problems.
    Have you contacted tech support? Even if your copy isn't registered, you can get help over the phone. They'll ask for a serial number. You'll also need to get the updates as LP8 out of the box had some issues.
    I'm guessing you have the first macbookpro 17" its a core duo with 2G Ram max. Same as mine. I have 8.02 running under snow leopard and its fine. I suspect that something in one of those missing system updates might not allow L8 to complete the install.
    Hope this helps. Good luck.
    ScorpiiPirates

  • I am buying a new macbookpro which comes with Lion.  Lion has Quicktime X.  Logic Studio comes with Quicktime Pro 7.  Do I have to download Quicktime 7, or will Logic Studio work fine with the Quicktime X player?  Will there be a Quicktime Pro X soon?

    I am buying a new macbookpro which comes with Lion.  Lion has Quicktime X.  Logic Studio comes with Quicktime Pro 7.  Do I have to download Quicktime 7, or will Logic Studio work fine with the Quicktime X player?  Will there be a Quicktime Pro X soon?

    your new lion-machine should have quicktime 7, too. if it doesn't, and if it doesn't show up after you migrated your stuff from you old machine you can always reinstall it from the logic dvd's, it's part of logic. my recommendation is to always use quicktime 7, since it's got many features that are absent in quicktime x. quicktime x is nothing but a polished video player. in quicktime 7 (pro, comes with logic) you can even do edits and paste your music onto video files. i use it all the time, especially since logic 64bit doesn't export to video anymore.

  • How is compatibility with creative cloud products (Photoshop and Illustrator)  with Macbook Pro?  I am making a big purchase and would love some        feedback

    how is compatibility with creative cloud products (Photoshop and Illustrator)  with Macbook Pro?  I am making a big purchase and would love some   
    feedback

    Hi Frederick,
    You're spending a lot of money.  I will add my 2¢ -- -- but you must, as I assume you know, fully research your options.
    Environment:
    Start with your workspace (inc. lighting) and your clothes.
    Screen:
    The iMac screens are lovely, but not, from what I hear, monitor-grade accurate.  For critical color work, use NEC or Eizo monitors.  I use NEC, with their SpectraView II software and an X-Rite ColorMunki photospectrometer.  At the time, this was the least expensive color-calibrated workflow.
    Printer:
    Epson's are great, imho.  I use a 3880 in my studio and rent a 9900 by the hour when needed.  I have read of problems (iirc) with one of the printers in the 7000 line, however.  The take-home lesson that I filed in my brain was, "If you're going to spend the money on the 7000 line, just get the 9000 line."
    Aperture workflow:
    Aperture is a fantastic workflow tool.  Since you are adept with PS, you should set PS as your external editor.  Use Apertures formidable tools for storing and organizing your Images, and its robust editing tools for either all your proofing, or all but your most demanding editing needs.  That said, allow a good bit of time to get the feel of Aperture.  It is not at all like Bridge.  But your important choice is which RAW converter you want to use.  There is, imho, no reason to use Aperture if you are going to use Adobe's (or anyone else's) RAW converter.
    Good luck!
    --Kirby.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • How do I install logic 9 on an older macbook pro ?

    I downloaded logic 9 on my new macbook pro through to App Store. I want to also run it on my older macbook (Early 2008) currently using mac os x 10.5.8. How do I upgrade the Os X so it works and how do I install logic on the old one ?
    - I can't go from 10.5 to 10.8
    - I need at least 10.6.8 to run Logic Pro 9
    - Once the Os X is up to date, how do I transfer the app, if possible avoiding downloading 20Gb again.

    Hi just curious, how is Logic running on your new Macbook?

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    Read through this:
    http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

Maybe you are looking for