Logic Studio 9 upgrade won't work with my Studio 8 retail key

I recently bought a new Mac mini with Logic Studio 9 upgrade as I already own a retail box of Logic Studio 8. I just tried installing Studio 9 after a clean install of OS X 10.6.1 and it tells me my key is invalid, so I install Logic Studio 8 before trying again (which accepts the key and works fine) but the Studio 9 install still won't accept it. Has anyone else had this problem and who do I contact about getting this fixed?

it might ask you for the serial number of LP8(Logic Studio ) before installing LP9 (Logic Studio 2).
Could it be that it asks for that and you put the serial of LP9 there>?
Else call 0844 209 0611 it's £0.05p per minute when you call from a landline, the response is fast.
A

Similar Messages

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

There is nothing to do, unless you buy a new computer.
Mac OS 10.5.8 or later is required.

Apple Remote won't work with Logic

I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
I've searched the Internet and am finding little on this topic.

My new shuffle won't work with my operating system

I was really pleased to be given a new shuffle for my birthday, but it won't work with my operating system. I feel disgusted and cheated; I have been using macs for years and don't see why I should have to buy a new one in order to use a piece of Apple technology. It's not good enough to say that the operating system requirements are clearly stated, as the person who bought me the shuffle didn't know that. I am so furious that I am thinking of going back to pcs next time I buy. Apple really should get their act together, because various forums I have consulted suggest that a lot of other people feel the same.

Feel better now?
We are all users here just like yourself so we cannot do anything for you besides making some logical suggestions to you. So if the person had bought you some 3rd party software that only worked with Leopard and/or Snow Leopard would by be just as furious? Just curious.
You don't have to buy a "new one" to use your new Shuffle, just upgrade your OS. Are you using a PowerPC or Intel Mac Mini? If the latter just go buy a copy of Snow Leopard, install it on your computer and download the latest iTunes. Problem solved. If it is a PowerPC look around and find and install a copy of Leopard.

RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

I have a Help project created in RoboHelp for Word 8. I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010. So I purchased RoboHelp 10 and have installed RoboHelp for Word from it. Alas, RH for Word STILL won't work with Word 2010. When I try to open my project, I get this message:
Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
Any ideas?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Outlook Email script won't work with Reader 9.1

The attached form was designed in ES 8.2 and has worked fine with Reader 8.0. The "properties defaults" tab is set for Reader 9.0 or better. However, upon recent upgrade to Reader 9.1, the Outlook Email script stopped working. I'm new to Livecycle and scripts and was hoping that someone had an easy fix?

okay thanks. One more question. What script is used to activate the "read receipt requested" function in Outlook?
Date: Wed, 12 Aug 2009 12:23:13 -0600
From: [email protected]
To: [email protected]
Subject: Outlook Email script won't work with Reader 9.1
Interesting .....it sounds like an issue in Reader. From a code perspective everything is good .....the code tells Reader's email service to communicate with the mail client. This could be where the issue is.
You may want to post your question on the Acrobat forum and see if they know of anything .....or you can report the issue to Support and have them look into it. Maybe something was introduced into the 9.1 version.
From a Designer perspective all is good.
Paul
>

My Word, Excel, and powerpoint won't work with mountain lion

My Word, Excel, and powerpoint won't work with mountain lion.
Just upgraded, and my icons are question marks.

Is the upgrade free? That depends, if you have a more recent version of Word, Excel and Powerpoint, then probably yes, but if not, nope, it'll cost you. Try M$ (micro$oft for that). However, might I suggest, humbly, that you try OpenOffice or NeoOffice. I used it to open up a powerpoint presentation and it did fine, plus the price is right
John b

Older model Airport Express won't work with Mountain Lion Airport Utility

just upgraded to Mountain Lion and noticed that of my network of three airport expresses connected to various stereo speaker systems throughout the house, one of the older models won't work with the supplied version of Airport Utility (v 6.1). Here is the message it gives in the utility when I attempt to select this particular Airport Express:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
Well, I go to download v 5.6 and none of the versions available will install on Mountain Lion! (even the version for Lion) Catch 22.
Any resolution to this (other than having to go out and buy a newer version Airport Express)?
Michael

Learn how to install AirPort Utility 5.6 on Mountain Lion here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Calculator won't work with Snow Leopard

I recently upgraded to snow leopard (mac pro). Now when I try to use my calculator it says the version I have won't work with this version. I have looked for updates but it says I current. Do you know why?

I went into my application file and the updated calculator was in there. Once I moved it onto my dock the caculator works. I assumed it would update automatically when I upgraded my software; now I know. Thanks.

IPhone 4s bluetooth won't work with Clarion FZ709

Actually the issue is that the iOS5 won't work with the Clarion FZ709 - it sees it and then immediately drops. I've reset the Clarion, reset the iPhone, same thing - it can discover it, then it loses it seconds later. Of course, dropping the version back to 4 isn't going to work for my iPhone, since it's new. I guess I could use my 3GS again, but I'm spoiled now with the features of the new phone.
A brief search discovered this issue was mentioned here months ago - will there be any update to address this? It's apparently causing issues for many other manufacturers and OEM stereos too.

Same problem with my Clarion FZ 709 after upgrading to iOS 5. Before this upgrade all works fine. Its no problem with the new iPhone 4s, its a problem with iOS 5. I could re-produce this problem with the new 4s and the older iPhone 4. Both are running iOS 5 and are still not longer able to connect via Bluetooth. After initial pairing the connection get broken after a few seconds. Yesterday i have upgraded both devices to 5.0.1 but the problem is still not fixed. From Clarion i got the feedback that they are not able to fix this issue because it seems that the problem depends on a change by Apple done within the new iOS. So hopefully Apple will recognize this problem and deliver a bug fix within the next iOS upgrade.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Logic Studio 9 upgrade won't work with my Studio 8 retail key

Similar Messages

Maybe you are looking for