LOGIC STUDIO AND M-AUDIO PROJECT MIX

Hi guys,
I purchased a new imac yesterday, 2.4ghz intel core duo with 4gb of ram and 320gb hard drive.
I also have a m-audio project mix which I bought around 4 months ago. I used to use this on my PC with cubase, however I cant get the project mix working at all now. I have of course ensured switched to logic mode lol.
I'm also using mac os x 10.5.2 and downloaded the update for logic pro 8 as well, I believe its 8.0.1
I installed the beta version drivers from m-audio website, which appears to work. I switch on the project mix, double click the m-audio firewire from my apps folder and thats ok. If I switch off the project mix theres a pop up which then says project mix not found so i'm guessing my mac is recognising the hardware. Also when I switch the MIX on and check the audio midi setup from utilities it is showing in there also.
On logic i have set the preferences/audio correctly i think. The core audio check box is ticked, the device states project mix multichannel, I/O buffer 256 and 24 bit recording is enabled.
When I go to preferences/control surfaces/setup and try scanning though nothing is found! When logic is opened none of the sliders on the project mix flick to start as they would with cubase and none of the transport buttons etc work! im getting really frustrated lol
any help would be really much appreciated
thanks for your time
phil

Based on the fact that I don't see it listed under Preferences>Control Surfaces>Setup>New>Install and the MAudio website says that, in the case of Logic, "DAW software must support Logic Control, Mackie Control, or HUI protocols" here http://www.m-audio.com/products/en_us/ProjectMixIO-main.html , I suspect that you will have manually add a Mackie Control/Logic Control in order use the Project Mix with Logic. Just set the input and output ports to the control i/o on the Project Mix. Or teach the Project Mix everything you want it to do manually under Preferences>Control Surfaces>Learn.

Similar Messages

  • 2 Problems using m-audios project mix with logic, can you help

    i have just got my m-audio project mix, and it seemed very easy to set up till i tryed to start recording
    the first problem that i am having is that although, i can see that there is audio soming into the computer in the system preferences, logic is refusing to show anything
    the second problem that im having is that it is only letting me press record on 2 tracks when i would like to use all 8
    if anyone can help me id be very thankful
    G4 Powerbook   Mac OS X (10.4.9)  
    G4 Powerbook   Mac OS X (10.4.9)  

    Hi,
    I don't know anything about how your setup is plugged into each other,so I'll gracefully and carefully go out on a limb:
    1.The Migraine Audio device,it has sound outputs...yes??? Are these outputs hooked up to any sound-generating devices,like speakers,yes??? If not,that would be one reason why you don't hear anything from the migraine device.
    2.The Core Audio Drivers in Logic,they are configuerd correctly,yes???? They are selecting the Migraine device as the I/O,yes??? If it is not,then you might be recording with the built-in mic,oohh la la,not a good thing.
    3.If you do have spekaers hooked up to the migraine-induceing device,they should be on,and the monitor knob turned to about 10am,so your migraine does not get too loud.
    Did the limb I go out on break,or am i still up on the tree?

  • Will the m-audio project mix i/o work with Logic X?

    Hi,
    I have a m-audio project mix i/o interface/control surface.
    Will this work with Logic X?
    Thanks,
    Mike

    If it works now on 10.8.4, then yes. This depends on OS X and drivers (if needed), not on Logic. Logic can only 'see' hardware that the OS can see.

  • Will my m audio Project Mix work with logic x?

    Hi, just wondering if my M-Audio Project Mix I/O will work with Logic X. I am currently running Mavericks.

    If it works with any other CoreAudio based app on your Mac.. it should work fine with Logic Pro X as the key is .. if it is compatible with your OS X version. Its not about compatibility with Logic Pro X at all in reality... as LPX uses Core Audio which is part of OS X.
    So do you have it up and running in 10.9.2 and does it work with any other audio app? If so which one(s)?
    If you haven't tried yet, you may be out of luck as the last driver update for your device was way back.. for 10.7.4.... and some people had issues getting to work under Mountain Lion, let alone Mavericks...
    http://community.m-audio.com/m-audio/topics/project_mix_driver_update_for_mac_os _10_8_5_final_version_of_mtn_lion

  • 10.4.8 update - M-Audio Project Mix firewire connection lost

    Wow!
    I was working with 10.4.7 for months, no problem
    I'm an pro user and this is my livelihood 24/7.
    Now my M-Audio Project Mix I/O audio unit (firewire) can not be seen by their latest drivers (came out in Sept 2006 with support for macpro) so they aren't old drivers.
    Now I have to work with the Mac audio outs....
    not good for my pro setup. I generally have projects in 32 bit mode and higher than 41K audio..
    When this get fixed?
    el profesor

    have the same problem with my iMac and the Audiophile.
    worked just fine for over a month, then suddenly and without any changes from one day to the other went into flashing mode and when starting the app it says it doesn't find any m-audio card connected. - uninstalled with uninstaller and reinstalled freshly downloaded driver (which dates from may 2006 and not oct as another person suggested in this forum). Doesn't work.
    any suggestions would be great!
    thanks in advance-
    bogushazard

  • Questions about Pre-amp of the Tascam FW1884 or M-Audio Project Mix...

    Hello everybody,
    I'd like to purchase a semi-pro (I hope) audio interface.
    The Tascam FW1884 or the M-Audio Project Mix with their "all in one" feature seem to fit for what I want to do.
    But I don't know if the Pre-amp or the digital converters are quite good or just awfull.
    Are they better or not than the FireStudio from Presonus ?
    Since I need at least 8 XLR inputs, the FireStudio seems to be a good choice (but without a remote control, I know...)
    Is there someone who have an answer ?
    Thanks
    Vincent
    PS : pardon my English, I'm desperatly French

    I have a ProjectMix and I like it. There are others that I know that like it, and there are others that don't. I've actually gotten some really nice results at times with it along with my Tube Condenser and Ribbon mics when I need it. I also plug my electric guitar into it, and I like what I get from it. It's not my main interface, but when I do use it for recording, I haven't been disappointed with it.
    jord

  • Logic Studio and Autotune

    I'd like to know if Antares plugin Autotune works with logic Studio, and also if I can use MainStage wih Logic (I mean for instance use MainStage instruments, like a piano, in a Logic project) ?
    Thanx !

    Autotune works just fine in Logic Studio. And the instruments in Mainstage are, as far as I know since I haven´t really used MS that much, essentially the same.
    /juhani

  • Logic Pro, Logic Studio and Logic Express

    Can someone explain the difference between Logic Pro, Logic Studio and Logic Express?

    Hi,
    I don't think your friend is right on this. When you install Logic X, only the most essential part will be downloaded. After that you open Logic X, and from within the program  you can download all the other content. Logic will look if you already have Logic 9 content on your harddisk, so it won't download files that are already present. So, after all is downloaded, all files are on your harddisk, just like Logic 9. By the way, Logic 9 will still be available after installing Logic X.
    Whether you will experience crashes will be very hard to prodect, because these will be caused by unforeseen combinations of your computer, audio interfaces, maybe even other hardware, kernel extensions etcetera. If you wait for a couple of months, updates of Logic X will probably have less crashes. As said, on my computer it's just as solid as Logic 9.
    Garittan will probably advise a fast harddisk to prevent complaints when people are pushing the plugin to the edge. I would expect that it's not a black/white story.
    The AUMatrixreverb can be found in any audio plugin slot completely at the bottom: Audio Units > Apple > AUMatrixReverb.
    About the Epiano: in Logic Express there is only the Garageband Epiano, I think. Logic Pro 9 had a great ePiano that they gave a new name and changed a bit in Logic X. Both very nice.
    Yes, you may be right, not too many drums with brushes in Logic X, I think. Or does anybody else know where to look??
    Kind regards,
    Jaap

  • Just installed logic studio and its not compatible with mac os x

    Just installed logic studio and cant open logic window  message displayed says version not compatible with mac OS X

    You  need to go to software update (apple logo/software update)
    Let it update and youll be fine ^^

  • Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks

    Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks

    José, if you buy and download Logic Pro in App Store now, the best option would be to buy an upgrade to Logic Studio. I don't think Jam Packs are available any more in Apple Store, besides it will be more expensive buying them one by one than upgrading to Studio.
    Español: José, si compras y bajas Logic Pro de App Store ahora, despues la mejor opción será comprar el upgrade a Logic Studio. No creo que estos dias fuera posible comprar Jam Packs de Apple Store, y además comprarlos uno por uno seria más caro que el upgrade a Studio.

  • Logic Studio and Pro Tools 6.9

    Anyone knows if there is a know issue about compatibility between Logic Studio and Pro Tools 6.9 software? Whe I launch Logic , it says that it can't find DAE folder and other TDM things...
    any idea?
    Chix

    Thx Mark,
    "probably" would mean that are you sure or just is an ipotetic answer?
    Nobody here has Logic 8 and HD2???

  • Does M-audios project mix I/O not function with Logic express 7.2 ?

    I am having lots of problems getting this working, and it suddenly occurs to me that this equipment may not work with the Express version. Anyone know?

    Scott,
    You bring music to my ears. A few questions (I'm sold at this point, just want these questions answered for sugar coating, I guess):
    1.) Does the Project Mix communicate effectively with Logic's 'MIDI Learn' feature? I tried utilizing this with M-Audio's Trigger Finger, but the Finger (or Logic, can't tell which) did not lock on to the assignment. Having any trouble with this?
    2.) Are there memory banks and is it easy to save all settings at any given point to certain bank? Ideally I'd like to have a different memory bank for each song, so an extensive inventory of blank memory would be very useful.
    3.) How's the LCD Screen? Really awesome or uncommunicative with the user (as in, do the abbreviations make it difficult to read, or is it fairly intuitive?)
    Thanks a lot. And Stash, your words are tight, too.

  • Installing and Using Logic Studio and Final Cut Studio 2 On the Same iMac

    In March of this year, I switched from being a long-time user of PC's to a 24 in. 2.4 GHZ iMac. In late May I purchased Final Cut Studio 2 and Aperture and have greatly enjoyed using both of these applications on my iMac. Both run with no problems under Leopard which I installed shortly after it came out. I am now considering the purchase of Logic Studio since I have enjoyed midi sequencing and audio editing for years on my PC's but wish now to do this on my iMac.
    I note that two of the applications included in Logic Studio (Soundtrack Pro 2 and Compressor 3) are a part of the Final Cut Studio 2 suite of programs that I already have installed on my iMac. How will Logic Studio handle this issue when I run the install of that software, i.e. will it be aware that I already have Soundtrack Pro 2 and Compressor 3 and just have those install options grayed out or will it overwrite my FCS2 installation of those two applications? Are there other issues or conflicts between Aperture or Final Cut Studio 2 applications and Logic Studio that I should know before installing Logic Studio?
    Thank you very much in advance for responding, and I look forward to reading this forum from this point onward.
    Tom

    Thanks again for your prompt responses, blayzay. I look forward to getting and installing Logic Studio. If anyone has any precautions on using it with FCS2 or with Leopard, please add a comment to this thread.
    Tom

  • CVP call studio and default audio

    Not sure if this should get posted here or on the development forum but it's getting posted here anyways...
    We have 4 combo boxes in our CVP deployment so we have 4 media servers. I'm trying to figure out what to configure for the Default Audio Path URI in Call Studio when creating a project .It appears that I have to specify either a single media server to pull the audio from or pull it from flash.
    I know our gateways will pull down the wav files from the media servers but if I specify flash in the studio application, do I need to load the wav file directly onto flash on the router or can it access the media servers and pull it down? We run most of our ICM scripts off of microapps, not custom vxml apps. Most of the documentation and the partner class I took doesn't look at multi server deployments and combo boxes like as most standard deployments are like this now. I don'ts ee anything in the Cisco docs for CVP that specify this information. Any help would be appreciated.
    We are using SIP and CSS if that makes a difference.
    ICM 7.5.9
    CVP 7.0.2
    UCM 7.1.3
    thanks
    Paul

    The normal way is to use the VIP you built on your CSS. Let's say this is a.b.c.d and it manages the IP address of the media servers as a "service", providing load balancing and resilience.
    For each application in Studio you should make a matching default audio path and put all the media files under that. Makes it easy - even if there is repetition of system files (1.wav, 2.wav etc). You can control the lifetime (expiration) on IIS more easily.
    Let's assume your application is called "foobar" and your locale is "en-us".
    So set the path to
    http://a.b.c.d/en-us/app/foobar/
    Don't forget the trailing slash. As you go through the Studio program, you just need to specify an audio item as "mywavefile.wav" and that makes it really easy to look at the Prompt Dictionary, as they have simple wav file names and no path information.
    Others may have different views, of course. I'm prepared to vigorously defend mine.
    On IIS you will have wwwroot\en-us\app\foobar with a bunch of files.
    Regards,
    Geoff

  • Workability of Logic Studio and

    I'm thinking about getting whatever the current version of Logic Studio is (9?).  If I do and am writing with someone who's using Logic Pro 7, will will be able to import and work on each other's files or will there will be certain things that won't translate from 7 up to 9 or from 9 down to 7?

    Hi
    Bassplayuh wrote:
    Do you know if there is a "save as" type command in Logic that would allow me to save the 9 files down to a 7 version
    There is no such function in Logic.
    Your best solution depends wheteher you need to keep any MIDI /Software Instrument tracks available in the transfer.
    Logic 9 has  'Export all Tracks as audio files" functions, which would allow you to create audio files that could be imported into v7. You may also need to export a MIDI file (possibly with any MIDI parts) to get the tempo/Time signature maps.
    HTH
    CCT

Maybe you are looking for