Logic Studio isnt showing up anywhere on my macbook pro

I just bought a macbook pro and logic, installed logic all the way and it asked me to put in the original Logic Studio Install disk, it said it was installed, ejected the disk, now i cant find it in applications or in the finder? i've just reinserted the studio install disk and it says it has 12 gb of data to install, as opposed to the original 55 gb? Whats up?

Nevermind, the installer repeated itself three times over and on the third time for some reason it worked.

Similar Messages

Logic Studio 9 Not installing on a new MacBook Pro

I just purchased a new MacBook Pro (Retina) running the Mountain Lion (10.8.3). When I try to run the installer i'm being told that I can't run the installer because Power PC Applications are no longer supported even through the discs indicate it is a Universal App.
Any idea what gives?? I was able to install it on another MacBook Pro I got last year.
Sky....

Hi
MlchaelLAX wrote:
Last time I checked Pacifist, it allows the user to extract the component parts out of a package.
Have they now updated it to allow for Pacifist to actually run the Installer Script, too (in such a way as to duplicate the action of the original Installer script)?
I think that you will find that it has done so for some time, but it certainly does now:
CCT

IPad not mouting anywhere on my MacBook Pro. Please help!

Since downloading and installing iTunes 10.5 and IOS 5 on my iPhone (3Gs), my iPad 1 is not mounting anywhere on my MacBook Pro (inc iTunes, iPhoto, Finder etc). I am running OS X 10.7.2
Can anyone please help?
Jim

Where did you check? iPhoto is inside the Applications folder.
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Care to share which OS you are using?

Does ipad2 have a "show topsites" feature like the Macbook Pro?

Does ipad2 have a "show topsites" feature like the Macbook Pro?

No, Safari on the iPad is a fairly basic browser and with iOS 5 it now uses tabbed browsing and not the thumbnail/page view as on previous iOS versions (which only showed your open pages and not top sites).

Urgent-logic serial number won't work on new MacBook Pro

Just purchased a new MacBook Pro & did Migration Assistant. Logic now asks for my serial number, I punch it in and get a Invalid Serial Number dialog box. Whats up with this, my Logic Studio package is 2 years old and correct. Help!

HI, I had logic pro support on the telepone, and he said I had reversed the last two letters,I am not normally dyslecsic but he saved me because he was using shared screen,a fine thing at times like that.
This is almost a year ago, I hope you got it working!

External 3rd party USB DVD drive will not show up on my 2008 Macbook pro

I have a the new Macbook pro, when I connect my Liteon USB DVD drive it does not show up my Macbook pro. The only DVD drive showing up is the one on my Macbook pro. How do I make the 2nd DVD drive show up. I just need to 2nd drive to tranfers data from dvd to the external drive.

Hi, ipodtrip1. Nothing will appear on your MBP's desktop unless there is a disc in the drive. Does a disc in the drive not appear either?
If not, does System Profiler detect the drive as a connected device?
If you have another USB device you can connect to your computer, disconnect the optical drive and connect the other device. Does System Profiler detect that device?
If not, reset the System Management Controller, and see whether doing so reactivates your USB port.

Transfer tv shows from ipod touch to macbook pro library

hey, so I have tv shows on my ipod touch that i got from a computer years ago that has crashed, and i have no contact to it, what i am hoping i will have help on is i want to transfer tv shows from my ipod touch to my macbook pro library so i can then transfer them to my iphone 4,
THANKYOU!

Open iphoto, attach iphone, import photos.
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer

Is replacing the logic board going to make my early 2011 Macbook Pro as good as before

I have an early 2011 15" Macbook Pro that just crashed completely days ago. I sent it to the genius bar and was told that I need to replace the logic board and it costs amost $1000. I'm thinking whether changing the logic board actually means that my macbook would be as good as before. I mean I'm not having high expectations but I hope that it would at least lasts for another few years. I've only had this Mac for three years and I'm not sure if its a consistent problem for the early 2011 models regarding the logic board but I sure had mine replaced for at least three times in the first year when I got it. I'm not sure if I should just use that same money to get a brand new laptop, problem is, I'm quite unwilling to switching to a windows system if you understand how it feels.

The first thing I'd look at is your hard drive ... is your free space 10% to 15% or more of the total capacity? If not, that would account for what you're seeing.
See this for other considerations: http://www.thexlab.com/faqs/performance.html

Is the studio display an exact mirror of the macbook pro?

Hello,
When an Apple Studio display 24-inch is connected to a Macbook pro, is the screen (picture) on the studio display an exact mirror of your Macbook or can one have an entirely different picture on your studio display.
As an example: Can I have Photoshop CS4 fully open on my Macbook Pro and excel spreadsheet/word documents fully open on the studio display? If so, is there additional hardware/software for this.

As I understand, can I have the display and MacBook Pro open at the same time, use different programs respectively, and still use the MacBook Pro's keyboard. Am I correct.
Yes. You can drag windows to the desired screen (or with many applications, even spread a window across both). The only thing you can't do is have the menu bar or dock on both displays at once. When run in full screen mode, some applications (such as QuickTime Player) will blank the other display. Others, such as Mplayer, can run full screen on one display and let you do other work on the other display.
<http://mplayerosx.sttz.ch/>

How well does Final Cut Studio run with 3gb of ram? Macbook Pro 2.33mhz

I have a 2.33mhz (Model a1211) Macbook Pro. I've maxed out the ram to 4gb but because of the motherboard restrictions (that I still don't quite understand) it can only use 3GB.
I've read on the FCS specs that the minimum is requirement is 1GB but Apple recommends 4GB.
I cut mainly short 3 to 5 minute pieces with AVCHD video decoded with up to 60-90 minutes of footage.
Will I have any serious issues with any of the Final Cut Studio Programs that I should be aware of?
I'm obviously not expecting Mac Pro results but If it doesn't run very well with 3GB, I might have to rethink my purchase. If it is just a "hiccup" now and then with waiting for video to start or such, I will deal.
Thanks
Bryan
<Edited by Host>

Motion is gfx intensive. Meaning that the lower the gfx card, the lower the performance. You should expect little-to-no realtime performance from Motion on the system mentioned with even basic-to-remotely-intermediate animations. CPU RAM will make a difference in the amount of total frames that you can render in a RAM preview, but it will not affect realtime performance. With your proposed system: add a particle, a lower third text, a replicator with 5,000 points, a light with some shadows, and a reflection (and this is one of each mind you, not multiple instances) and expect around a * less than * 1-3 fps playback in draft quality with %50-%25 playback resolution. Then expect to wait up to a minute or more with the beachball of death for each parameter change. No joke either. Good luck fine-tuning your moderate-to-even-remotely-complex animation with your desired system.
If working in Motion is your desire, then focus on the graphics card. Unfortunately you can not upgrade your gfx card on the MBP, so you should consider selling your MBP and investing in a Mac Pro. You can upgrade the gfx card in the Mac Pro and obtain optimal performance from Motion. Otherwise you'll literally be stuck in the mud with your animations.

Crucial m4 256 GB internal SSD not showing in disk utility on MacBook Pro a1226 (late 2007) 2.4 ghz.

After the original Fujitsu 160gb hd died in my MacBook Pro (model A1226), I was advised at the Mac store to upgrade to a SSD. I installed the crucial m4 256gb internal SSD and powered on MacBook Pro from the Snow Leopard install disk so I could use disk utility to erase and reformat the new SSD.
The problem is the SSD is not showing up in disk utility. I have opened the computer twice and checked cable connections and still no luck. I have powered off computer and let sit for a while and tried again. I check compatability on crucial site before ordering SSD so I don't know what the problem is. Bad disk?

You were given bad advice.
Return/Sell the SSD and buy a 7,200 RPM hard drive instead, it should work fine and a more of a match for your older machine.
Your Mac doesn't have the faster SATA connections for a SSD also 10.6 isn't equipped for SSD's only hard drives, your basically putting a Ferrari engine in a Yugo, it can't handle it.
The 7,200 RPM drive will give you the performance and more drive space than a SSD anyway.
Follow these instructions when you erase and install 10.6, it will give the best results.
How to erase and install Snow Leopard 10.6

QMaster only showing 1 instance for i5 macbook pro

QMaster is only showing 1 instance for core i5 macbook pro. This is a dual core i5.
So still, I can only use one core. It only shows 50% of the preocessor being used and 50% is Idle in Activity monitor.
Long render times. Like 18 hours of render for 90 minutes of video 720 HD in Compressor.
So when I press "Share" for Compressor in QMater the "Options for Selected Service" is greyed out and only set to 1 instance.
Thanks

OK so back to Compressor. I am using Compressor and it is only USING 50% of the computer according to my Activity Monitor. Any thoughts?
When I look at my Windows computer it has a duel core system as well and uses 98% of the the processor according to its' monitor.
If you can't think of anything, that's cool, but just wondering if anyone has had a similar issue. Just wanting to chit chat. I don't really think I need to get a hulk deskop computer when Apple advertises that I can upgrade to a Quadcore (8 virtual core) macbook pro and be fine with that. Although I am using just the i5 duel core right now.

Help! my System Preference Display shows Color LCD instead of MacBook Pro! Y is is saying this?

Hello people, my MBP's systempref>Display shows "Color LCD" when ity should have been MacBook Pro! YTF is it like that?

It's supposed to read "Color LCD" - there's no "MacBook Pro" color profile (unless you've created one and saved it with that name).
Clinton

Whay can't I run Logic 8 with the 9 upgrade on my Macbook pro?

I have just bought logic pro 8 and in the same run upgraded it to 9 as it followed the package.
But after I installed it and push the Logic icon to use the program it says
- You can't use this version of the application Logic Pro.app with this version of Mac OS X. You have logic Pro.app 9.0.0 -
what to do?

update via software update to version 9.1.8

I-Phone 3 G don´t show on desktop / Finder of Macbook Pro.

Hi all,
just a quick question: just bought a Macbook, all works fine, but when I connect my I-phone 3G, I-tunes recognizes the phone no problem but the I-phone doesn´t show up in finder, nor as an icon on the desktop. In my preferences I have the option "show I-pod in Finder" enabled however.
It´s no big deal, I´d just like to know whether this is normal or not.
Cheers!!
Not a Clue.

Yes, it's normal. The iPhone and iPod Touch don't have a disk mode (or a real hard disk, only a flash-based disk) and will not show up in the finder like older iPods.

Logic Studio isnt showing up anywhere on my macbook pro

Similar Messages

Maybe you are looking for