Logic switches from comp-tracking to simple regions randomly

I got a problem with the comp-feature in Logic 9 Pro.
Since I love this function I want to use it all the time while tracking. Unfortunately, Logic sometimes just doesn't give me comps and records (randomly in my eyes) just simple regions instead of comps. It also happens inbetween one track: I records five takes and Logic puts all the five takes in one comp - very easy handling. And suddenly the 6th take is a new region and x-fading etc. is more difficult (just an example).
Did someone have the same problem or am I just not understanding something properly?
Thanks for your help!

in the transport widow. If you don't see it you will need to right click on the transport to configure the transport to show that button.

Similar Messages

After updates solo button doesn't work with comp track, anyone have the same problem?

Hello everyone, after upadtes solo button is not soloing a comp track,
is there someone that knows to fix this bug?
it's possible that now logic consider a comp track as muted, and then doesn't solo the comp track ?
thanks everyone

Looks like there may be a solution on Itunes 10.5 64bit will not install on Win7. I am going to try that.

Transport zones associated with nonexistent logical switches

Running NSX 6.1.2.
Somehow (unknown root cause), VXLAN configuration got into an error state and I had to reconfigure it. To do that, I had to remove all logical switches from the single cluster and pretty much clean everything out to clear all the dependencies. (Test environment, so not a disaster.)
But now I have two transport zones that cannot be deleted because NSX reports they are still associated to nonexistent logical switches.
The UI is consistent with API results (below): summary view for the TZ shows 1 or 2 logical switches, but the detail (related objects view) list is empty for the TZ.
API calls:
Summary for transport zone (vdnscope): 2 logical switches (virtual wires):
GET https://${NSX_MANAGER_URL}/api/2.0/vdn/scopes/vdnscope-4
<vdnScope>
<objectId>vdnscope-4</objectId>
<objectTypeName>VdnScope</objectTypeName>
<vsmUuid>420D40E8-2DEF-E4A3-26A5-365D194C67EB</vsmUuid>
<revision>1</revision>
<type>
<typeName>VdnScope</typeName>
</type>
<name>danger zone</name>
<description>test transport zone</description>
<clientHandle />
<extendedAttributes />
<id>vdnscope-4</id>
<clusters />
<virtualWireCount>2</virtualWireCount>
<controlPlaneMode>HYBRID_MODE</controlPlaneMode>
</vdnScope>
List of associated virtual wires: empty list:
GET https://${NSX_MANAGER_URL}/api/2.0/vdn/scopes/vdnscope-4/virtualwires
<virtualWires>
<dataPage>
<pagingInfo>
<pageSize>20</pageSize>
<startIndex>0</startIndex>
<totalCount>0</totalCount>
<sortOrderAscending>true</sortOrderAscending>
</pagingInfo>
</dataPage>
</virtualWires>
But delete is blocked:
DELETE https://${NSX_MANAGER_URL}/api/2.0/vdn/scopes/vdnscope-4
<error>
<details>Transport zone vdnscope-4 is in use. All dependent logical switches must be removed prior to deletion.</details>
<errorCode>812</errorCode>
<moduleName>core-services</moduleName>
</error>
I'm at a loss of how to clean this up. Would prefer not to have to reinstall everything. Has this happened to anyone else?

Hello Ganu,
When you create a Logical Path & assign it to a physical app server path it does ask you to save the entry in a Workbench request.
I think you can zero-in on the correct TR by checking in the table E071 (not E070 as you have done).
In SE16 you can search for the TR using the following selection criteria:
PGMID = 'R3TR'
OBJECT = 'CDAT'
OBJ_NAME = 'FILENAME'
OBJFUNC = 'K'
@Other posters : Did you really try it out before giving your (incorrect) responses ?
BR,
Suhas

Two logical switches within one Catalyst

Hello,
I have purchased two catalyst 3560 switches (with 24 interfaces) on Ebay to prepare for ccnp switch exam. It would be great if I have 4 switches. Is it any possibillity to create two logical switches from one? I mean, not by assigning interfaces to different vlans?

No, it is not possible in Catalyst switches. It is possible in Nexus 7k, but it is another platform at all.

Track Selection Follows Region Selection

Does this exist? I'd like to select a region and have Logic automatically select the track that the region is on. This way when I double click a MIDI region and open it in the Piano Roll, the selected track will reflect the track of the region I am editing. Many times I'll be editing a region and then mistakenly adjust the volume of the wrong track because I forgot to select that track before I clicked on the region. Thanks for the help!
Logic Pro 8.02
OS 10.5.6

Thanks for the help, that's close to what I'm looking for but not really it. That links the piano roll and the region in the arrange window together. I'm trying to find a way to link a region in the arrange window to the track its on. I have "Select Regions on Track Selections" enabled, but I'm looking for the reverse: to have the track selection follow the region I've selected.
I hope this makes sense. I also hope it exists.
Thanks, again for the help!

Time to switch from Pro Tools to Logic?

The more I work with Final Cut X the more I don't like the Pro Tools interface. I'm repeatedly finding myself automatically using the Final Cut keyboard shortcuts for navigation, and of course they don't work. Is the Logic interface more similar to that of Final Cut X?

boogie457 wrote:
Hey I am have just made the switch from Pro Tools to Logic and was hoping if someone could take the time to help me out with a couple questions! Thanks for you patience
1) For some reason Kore and Motu Symphonic Orchestra aren't showing up in my instruments. When I click and hold the track where I can insert the instrument there is no Motu folder. There is a native instruments folder but kore isn't in there. I've checked both 32bit and 64bit floders for both. How do I get them to show up?
Logic only eats AudioUnits. Are you sure you have the AU versions installed?
2) When I import an Audio File into a logic session i'm getting "Error while trying to synchronize Audio and MIDI. Sample Rate 23938 recognized.Check conflict between Logic Pro and external device" When I playback the imported audio file it sounds terrible it sounds like it plays back at half speed with lots and lots of artifacts. My session setup is at 48K but and so was the audio going in. I wasn't sure what to check for when it was referring to "check conflict between LP and Extern Device"
Check the Audio MIDI Setup utility or the audio interface's own tool and change clock from back and forth from and to what it should be.

No Sound from Logic Express 8 during track playback?

Hi and Help. I am probably being stupid and I guess this is simple to clear up. I have read the manual but I can't find a resolution (probably miussed that to!). Anyway the problem is this, I have just bought Logic Express 8, set up was fine on my macbook pro intel core duo which is also linked to logitach Z-10 speakers (actually good!). Upon opening Logic I set up a track (by the way Core Audio is on) and drag a loop from the brouser into a new track, it locates in the track and I play it back, nothing, not a sound or blip on the channel indicator. I can audition the loop in the brouser and it plays fine. Why no sound playback from the track??
Can you help please, I have odviously missed something simple but I don't know what it is.

Well yes I was being stupid. I have resolved the issue, it was down to understanding terminalogy. All is working.

Logic error in rotating a bot towards a target (switch from -180 to 180 and vice versa causes error)

Hi,
I am making a Bot class. This function rotateTo makes the bot rotate towards some coordinates, xTarget and yTarget.
There are two targetRadians lines because it is easier to read for me.
The target radians shows the angle of the target from the bot where the bot angle is this.angleRot.
if the bot-angle minus the target-angle (it says in radians but is actually in degrees) is less than 0 it turns right and if it is greater than or equal to 0 then it turns left.
public function rotateTo(xTarget, yTarget):Void {
                    targetRadians = Math.atan2(yTarget-this.yPos, xTarget-this.xPos);
                    targetRadians = Math.round(radiansToDegrees(targetRadians));
                    trace(targetRadians);
                              if (this.angleRot-targetRadians<0) {
                                        turnBot(5);
                              } else {
                                        turnBot(-5);
This basically works. The bot rotates towards the target at 5 degrees per frame.
The angle setup is that if the target x, y is below the bot x, y, the target angle is about 90, if it's to the right its about 0, if its above it's about -90 but as the angle is decreased to -180 from above to the left of the bot, when it goes below the bot (and to the left) the target angle switches to 180.
So something like: with the bot in the middle and the target being located at one of the numbers;
          -90
-180               -1
180               1
           90
The fact the target angle switches from -180 to 180 or 180 to -180 confuses the bot and the bot decides to turn ALL the way the opposite direction BECAUSE;
if the bot angle is 160 and target angle is 175, the bot angle increases because target is greater than bot angle. If the target angle changes to -180, bot angle decreases even though it's more efficient to change from 160 to -180 through increasing the bot angle as at 180 it changes to -180. I just cannot work out the logic to use to make this work though.
Any suggestions? Thanks.

Hey I got it to work finally:
public function rotateTo(xTarget, yTarget):Void {
                    targetRotation = Math.atan2((yTarget-this.yPos), xTarget-this.xPos)*180/Math.PI;
                  if (this.angleRot-targetRotation>180) {
                              this.angleRot -= 360;
                    } else if (this.angleRot-targetRotation<-180) {
                              this.angleRot += 360;
                    if (this.angleRot-targetRotation<0) {
                              turnBot(5);
                    } else {
                              turnBot(-5);
so basically I added a couple of if statements before the main business.... I don't really have a coherent explanation for the fix but it works!

SCVMM Logical switch setup from not using SCVMM

I'm playing around with SCVMM 2012 SP1 with my Hyper-V 2012 setup. I have a test server but I'm looking at migrating from the way I was doing thing to the way SCVMM does things (with logical switch and multiple virtual network adapters per VLAN)
This is how I currently have my production setup:
Each Hyper-V host has two nics
Those two nics are teamed together using Windows 2012 Teaming (Hyper-V port, switch independent)
They were not configured with SCVMM
The Hyper-V virtual switch is named "Trunk"
All VM's are part of the Trunk virtual switch and tagged on the guest level
What I'm trying to do after watching this video: http://technet.microsoft.com/en-us/video/tdbe13-network-management-in-system-center-2012-sp1-vmm.aspx
Created my logical network "Datacenter"
Added my three VLANs to the Network site: (VLAN 1 is management, VLAN 10 is client, VLAN 505 is DMZ)
Created my Native Port Profile with HyperVPort and Switch Independent and mapped it to my network site and used the Datacenter logical network (DID NOT check network virtualization.. don't want to use that)
Created my logical switch with uplink mode TEAM and bound to my uplink port profile
Now on my test host:
I broke the existing TEAM I had. So now it is a server with two nics and the IP it had on one nic (10.10.0.207)
Went to properties of VM
Virtual Switches -> New Logical Switch -> Mapped to my "datacenter" logical switch, picked both physical adapters and mapped to my only uplink port profile I have
New Virtual Network Adapter
Name: Management, Checked this adapter inherits settings from physical, mapped to my Management Network, set to "Host Management" port profile"
New Virtual Network Adapter
Name: Client, adapter inherits is not checked, mapped to my Client Network, set to medium bandwidth port profile
However when I do this:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server HYPERV07.mgmt.local could not be established.
Unknown error (0x80072ee2)
Recommended Action
Ensure that the HTTP service and/or the agent on the machine HYPERV07.mgmt.local are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
What I noticed:
I never lose connectivity to the host during this process
Always failes at 65%
Is this because I don't have a dedicate NIC for management? Also would there be an easy way to migrate from how my production is setup to what I'm trying to do?

I am actually just finishing up but I redeployed and went to 2012 R2. It seemed to be able to do it.
What I did was created one logical switch with one vSwitch (which is a trunk). Then multiple VM Networks that have the different VLAN ID's.
It seemed to work OK except during the creating it wouldnt TAG VLAN 1 on the vSwitch when it created which was needed for it to communicate on my network. Once I saw it creatd it and lost connectivity I manually put the VLAN 1 on the vSwitch and set the
IP address for the host.
So far seems ok but I'm still associating VM's with the Logical Switch I setup and bringing everything back up...

I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word. I am a computer nitwit and am hoping for some simple sol'n.

I recently switched from years of PC to iMac ( OSX 10.7.5) and need to batch convert thousands of old WordPerfect files (many without an apparent file extension) into my new Microsoft 2011 Word. I am a computer nitwit and am hoping for some simple solution.

Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages.
If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
Quit the application.
You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3. Move the file to your desktop.
Open the application and test. If it works okay, delete the file from the desktop.
If the application is the same, return thefile to where you got it from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

Unwanted sounds when logic plays from the start of the track!!! help!!

i would really appreciate if anybody helps me here!
i have logic rewired with reason. i have numerous tracks and instruments on both
all my drums are in reason and when i play the tracks back in logic i get an unwanted kick and a crash at the point i start the song, this happens anywhere between the count in and the first audio in logic.
whe i play it back from the start in reason i dont get these sounds, only when i play it from logic!
there is definately no loose midi data in reason(as there is no place for it ) and i have had draw a long count out in logic just so the track starts after these sounds have faded away?
any advise???

Correction:
This has happened to me lots too, to sessions where I am using a lot of virtual instruments. I don't think you issue has anything to do with ReWire.
I think it has to do with stopping a song before it ends, returning to the start and playing song again. It has to do with lookahead and ram etc ....
The way to avoid this is to back your song start up, or nudge your tracks forward a bit. One bar or less seems to do the trick for me.
Hope that helps.
Cheers
Dee

How do I switch from one column to another in a simple 3-column document? Seems lame, but I can't find the answer in "help"...

How do I switch from one column to the next, skip around? Tab key doesn't seem to do itl. I can't find any "help" in "help". Help. Please. Thank you.

Hi Karen,
It is simple.
Columns fill with text as the text becomes enough to spill over from the previous column. Below is an example. I have used a huge (6" botom margin setting to shorten the page to a reasonable length for a screen shot, and turned on Show layout and Show invisibles so the column boundaries and invisible characters can be seen. Here there's no text in column 3 as there is only enough text to fill column 1 and part of column 2.
As more text is added, it eventually fills column 2 and flows into column 3:
You can force the text into the next column by inserting a column break. Here, a column break has repalced the paragraph break in column 2 (after 'fascilisi."):
Regards,
Barry

Logic Sample EXS playback from Finale - switch from MachFive?

I've been using MachFive for a few years, but am frustrated that it doesn't allow for performance changes via keyswitches in VSL libraries. (Keyswitches that change an instrument from, say, staccato to legato, without loading a new sample instrument.) MachFive 2.0, announced over a year ago, would have supported these features, but it seems to have become vaporware. I know that keyswitches and release samples work fine in EXS, and I'm considering switching from DP to Logic, but have a few questions first.
I do all of my writing on Finale, and I have Finale's output set to go through the MachFive instruments. (That is, all MIDI in Finale goes through MachFive's virtual instruments.) For large scores, I have 2 16-channel instruments on MachFive, each channel with a different sample instrument. (So, channel 1 is piccolo, channel 2 is flute, channel 17 xylophone, 24 tuba, etc.) I've been reading the forums here, and I'm now confused about how Logic handles this. People have talked about multi-timbral, multi-channel, etc., and it's all getting a big perplexing to me.
I understand that EXS will handle it differently -- but will it work? Can I set it up so that, as far as Finale is concerned, MIDI channel 1 will be a piccolo, and MIDI channel 24 will be a tuba? Am I going to run into memory issues in Logic that I don't encounter with MachFive? (I have a total of 4 GB of RAM. The Vienna Symphonic samples are huge, and I have them set up to load into RAM rather than stream, and it's only in massive orchestra fast tutti sections that I have any hiccups in MachFive. I never get any "out of memory" errors.)
Logic looks very nice, and I've been told that it runs more efficiently than DP, but before I spend all of that money, I want to be sure that my sample playback will be better -- not worse. Is it worth switching to Logic, primarily so I can have access to keyswitch program changes? (When I put it like that, it seems incredibly silly...)

The EXS is not an Audio Unit plug-in, It only lives inside of Logic.
If your intention is to use the EXS-24 inside of Finale, you cant do it.
If you use the Audio MIDI setup's IAC to transmit midi channels out of Finale and have Logic receive them, that might be possible. I believe you can only have 16 channels of midi on the IAC bus.
I think your best choice is to use Kontakt 2, that does support keyswitching and program changes.

Comp Tracks

Hey,
Can anyone give a quick tut on how to create a comp track, a la overdubbing on the same track, from two seperate audio tracks? Seems like switching from one part of a comp to another would be a lot simpler than switching from track to track.
Does Logic even allow for this?
Thanks in advance

Answering my own question
Right click on one of the tracks, scroll down to "Folder" and select "Pack Take Folder"
At that point, click and drag the rest of the tracks you'd like to include into the folder and you can switch back and forth.

How to merge different comp track into one comp track?

Hi
I use logic studio 9
I have recorded two different comp tracks for lead singing of project
And now I have two different tracks with a lot of takes to choose from in each one of them
I would like to merge the two into one comp track with all the takes so it will be easier to edit
Is there any way to do that?
By the way, there is no reason why I made 2 tracks for the same singing part. Now it seems to be a mistake...
Thank you very much

Hi
Basically, you need to unpack one (or both) sets of Take Folders, and then merge the two together:
Working on the basic assumption (for discussion purposes) that you have two tracks, each with Take Folders on them.
Method 1:
Select each Take Folder on track 2 and click-hold on the arrow top right of the folder. Choose Upack to new tracks. Carefully select the new regions and drag/drop them onto the Take Folders on Track 1.
Method 2
Unpack ALL Take folders on both tracks, Select all the regions and use the Region:Folder:Pack Take Folder function to re-pack into a new Take.
CCT

Logic switches from comp-tracking to simple regions randomly

Similar Messages

Maybe you are looking for