Logic User Down its been 18 hr. and counting Help!!!!!!

I recently installed Logic Studio on my Mac Book Pro and then I installed it on my Mac Pro Tower. I had to learn a song for an up coming gig and I could not get the chance for I Wish by Mr. Stevie Wonder so I imported the file in to Logic Pro and after playing it for a second the screen turned grey and it said that I had to shut my computer off by choking her out and when I turned it back on an Logic would not open at all it would just bounce and bounce. So I uninstalled it as much as i could I stoped when I seen about 45-50 extra gigs on my hardrive. I reinstalled it and it still bounced I did the disk repair I deleted the "com.apple Logic" somthing somthing somthing and it still didnt work I hope the Guru of all Guru gets this and shoots some secret Mojo to me Thanks

Hi Bass,
I'm not the guru you're after but in the absence of much other comment I can offer some help.
Assuming this is not an issue where Logic only allows one instance of itself to run on a network (using one serial number), then I'd try the following:
1. Update Mac OS X to 10.4.11 using the combo updater - *Be aware that this could affect other installations* but I have found it to be fine on my system with various software. Includes a Core Audio update - worth doing.
2. Uninstall Logic Studio as best you can including stuff from the Applications and preferences folders
3. Delete 'Logic Studio System ID' from /Library/Application Support/ProApps folder. Note that you'll have to re-enter your serial number if Logic finally does start up
4. Delete any .pkg file referring to Logic Studio from /Library/Receipts/
5. Empty the Trash
6. Unplug all USB and firewire devices, take the Mac off the network (if it's normally on one) and disconnect from the internet.
7. Turn off the power and unplug the Mac from the wall for a minute or two.
8. Boot up and do a full install of Logic Studio, ticking everything.
If you still don't get anywhere then this problem is down to something other than the usual suspects and perhaps you need to analyse the disk for damage etc, or reinstall Mac OS X.
Hope that's helpful and sorry I couldn't offer more.
R
Message was edited by: rrrobo
Message was edited by: rrrobo

Similar Messages

I forgot my security answers and i have provided rescue email same as apple id its been 6 monts and still no solution found i have credits in my account please help

i forgot my security answers and i have provided rescue email same as apple id its been 6 monts and still no solution found i have credits in my account please help

Well, of course a rescue address which is the same as the main address (which doesn't work) isn't a lot of use.
Please see Kappy's comprehensive User Tip:
https://discussions.apple.com/docs/DOC-4551

HT5312 Hi I'm just wondering does any one know why the email to reset ur password hasn't came to my email address its been 2 days and I have been trying since No Emails ?

Hi I'm just wondering does any one know why the email to reset ur password hasn't came to my email address its been 2 days and I have been trying since No Emails ? anyone know what happening ?

Either it ended up in a spam filter or it isn't being sent to that address. If you can't find it, use the link in the 'Additional Information' section of that article to contact the iTunes Store staff.
(88597)

I have an iPhone 5 16 GB and its been freezing alot and closes out of safari and my games often and my maps freezes alot, and also i just got the notifaction to update my phone to 6.02 i think it is until yesterday.

I have an iPhone 5 16 GB and its been freezing alot and closes out of safari and my games often and my maps freezes alot, and also i just got the notifaction to update my phone to 6.02 i think it is until yesterday. I'm still under my 90 warranty with apple. would they give me new one thats not glitchy if i brought it to the genius bar?

i just took it to the apple store i was late but the guy made me an appointment for friday, he left a comment for the appointment so i just go in they replace it i have my phone backed up through icloud n itunes, shoule i erase everything on my phone b4 taking to them or do they do that

I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

My ipad mini battery drained , its charging but i cant open it , its been 30 mins and its still in the red bar .... what to do ???.... please help

my ipad mini battery drained , its charging but i cant open it , its been 30 mins and its still in the red bar .... what to do ???.... please help

This may take a while as it is drained, but be patitent and wait. And hopefully it would work.

Just got my I Phone back from my mom. Its Been 2 weeks and i try to turn the phone back on and nothing came up on the screen. i plugged in the charger and nothing shows up ?! helpppppppppppppppppppppppppppppppppp

Just got my I Phone back from my mom. Its Been 2 weeks and i try to turn the phone back on and nothing came up on the screen. i plugged in the charger and nothing shows up ?! helpppppppppppppppppppppppppppppppppp

Plug the iPhone into a wall outlet, let it charge for half an hour and then try a reboot by holding both the power and home buttons until the apple logo appears.
If that does not work, take it to an Apple store genius bar to be tested by the technicians.

[Mostly Sorted] Extracting tags - regexp_substr and count help needed!

My original query got sorted, but additional regexp_substr and count help is required further on down!
Hi,
I have a table on a 10.2.0.3 database which contains a clob field (sql_stmt), with contents that look something like:
SELECT <COB_DATE>, col2, .... coln
FROM   tab1, tab2, ...., tabn
WHERE tab1.run_id = <RUNID>
AND    tab2.other_col = '<OTHER TAG>'(That's a highly simplified sql_stmt example, of course - if they were all that small we'd not be needing a clob field!).
I wanted to extract all the tags from the sql_stmt field for a given row, so I can get my (well not "mine" - I'd never have designed something like this, but hey, it works, sorta, and I'm improving it as and where I can!) pl/sql to replace the tags with the correct values. A tag is anything that's in triangular brackets (eg. <RUNID> from the above example)
So, I did this:
SELECT     SUBSTR (sql_stmt,
                   INSTR (sql_stmt, '<', 1, LEVEL),
                   INSTR (substr(sql_stmt, INSTR (sql_stmt, '<', 1, LEVEL)), '>', 1, 1)
                   ) tag
FROM       export_jobs
WHERE      exp_id = p_exp_id
CONNECT BY LEVEL <= (LENGTH (sql_stmt) - LENGTH (REPLACE (sql_stmt, '<')))Which I thought would be fine (having tested it on a text column). However, it runs very poorly against a clob column, for some reason (probably doesn't like the substr, instr, etc on the clob, at a guess) - the waits show "direct path read".
When I cast the sql_stmt as a varchar2 like so:
with my_tab as (select cast(substr(sql_stmt, instr(sql_stmt, '<', 1), instr(sql_stmt, '>', -1) - instr(sql_stmt, '<', 1) + 1) as varchar2(4000)) sql_stmt
                from export_jobs
                WHERE      exp_id = p_exp_id)
SELECT     SUBSTR (sql_stmt,
                   INSTR (sql_stmt, '<', 1, LEVEL),
                   INSTR (substr(sql_stmt, INSTR (sql_stmt, '<', 1, LEVEL)), '>', 1, 1)
                   ) tag
FROM       my_tab
CONNECT BY LEVEL <= (LENGTH (sql_stmt) - LENGTH (REPLACE (sql_stmt, '<')))it runs blisteringly fast in comparison, except when the substr'd sql_stmt is over 4000 chars, of course! Using dbms_lob instr and substr etc doesn't help either.
So, I thought maybe I could find an xml related method, and from this link:get xml node name in loop , I tried:
select t.column_value.getrootelement() node
from (select sql_stmt xml from export_jobs where exp_id = 28) xml,
table (xmlsequence(xml.xml.extract('//*'))) tBut I get this error: ORA-22806: not an object or REF. (It might not be the way to go after all, as it's not proper xml, being as there are no corresponding close tags, but I was trying to think outside the box. I've not needed to use xml stuff before, so I'm a bit clueless about it, really!)
I tried casting sql_stmt into an xmltype, but I got: ORA-22907: invalid CAST to a type that is not a nested table or VARRAY
Is anyone able to suggest a better method of trying to extract my tags from the clob column, please?
Message was edited by:
Boneist

I don't know if it may work for you, but I had a similar activity where I defined sql statements with bind variables (:var_name) and then I simply looked for witch variables to bind in that statement through this query.
with x as (
     select ':var1
     /*a block comment
     :varname_dontcatch
     select hello, --line comment :var_no
          ''a string with double quote '''' and a :variable '', --:variable
          :var3,
          :var2, '':var1'''':varno'',
     from dual'     as string
     from dual
), fil as (
     select string,
          regexp_replace(string,'(/\*[^*]*\*/)'||'|'||'(--.*)'||'|'||'(''([^'']|(''''))*'')',null) as res
     from x
select string,res,
     regexp_substr(res,'\:[[:alpha:]]([[:alnum:]]|_)*',1,level)
from fil
connect by regexp_instr(res,'\:[[:alpha:]]([[:alnum:]]|_)*',1,level) > 0
/Or through these procedures
     function get_binds(
          inp_string in varchar2
     ) return string_table
     deterministic
     is
          loc_str varchar2(32767);
          loc_idx number;
          out_tab string_table;
     begin
          --dbms_output.put_line('cond = '||inp_string);
          loc_str := regexp_replace(inp_string,'(/\*[^*]*\*/)'||'|'||'(--.*)'||'|'||'(''([^'']|(''''))*'')',null);
          loc_idx := 0;
          out_tab := string_table();
          --dbms_output.put_line('fcond ='||loc_str);
          loop
               loc_idx := regexp_instr(loc_str,'\:[[:alpha:]]([[:alnum:]]|_)*',loc_idx+1);
               exit when loc_idx = 0;
               out_tab.extend;
               out_tab(out_tab.last) := regexp_substr(loc_str,'[[:alpha:]]([[:alnum:]]|_)*',loc_idx+1);
          end loop;
          return out_tab;
     end;
     function divide_string (
          inp_string in varchar2
          --,inp_length in number
     --return string_table
     return dbms_sql.varchar2a
     is
          inp_length number := 256;
          loc_ind_1 pls_integer;
          loc_ind_2 pls_integer;
          loc_string_length pls_integer;
          loc_curr_string varchar2(32767);
          --out_tab string_table;
          out_tab dbms_sql.varchar2a;
     begin
          --out_tab := dbms_sql.varchar2a();
          loc_ind_1 := 1;
          loc_ind_2 := 1;
          loc_string_length := length(inp_string);
          while ( loc_ind_2 < loc_string_length ) loop
               --out_tab.extend;
               loc_curr_string := substr(inp_string,loc_ind_2,inp_length);
               dbms_output.put(loc_curr_string);
               out_tab(loc_ind_1) := loc_curr_string;
               loc_ind_1 := loc_ind_1 + 1;
               loc_ind_2 := loc_ind_2 + length(loc_curr_string);
          end loop;
          dbms_output.put_line('');
          return out_tab;
     end;
     function execute_statement(
          inp_statement in varchar2,
          inp_binds in string_table,
          inp_parameters in parametri
     return number
     is
          loc_stat dbms_sql.varchar2a;
          loc_dyn_cur number;
          out_rows number;
     begin
          loc_stat := divide_string(inp_statement);
          loc_dyn_cur := dbms_sql.open_cursor;
          dbms_sql.parse(c => loc_dyn_cur,
               statement => loc_stat,
               lb => loc_stat.first,
               ub => loc_stat.last,
               lfflg => false,
               language_flag => dbms_sql.native
          for i in inp_binds.first .. inp_binds.last loop
               DBMS_SQL.BIND_VARIABLE(loc_dyn_cur, inp_binds(i), inp_parameters(inp_binds(i)));
               dbms_output.put_line(':'||inp_binds(i)||'='||inp_parameters(inp_binds(i)));
          end loop;
          dbms_output.put_line('');
          --out_rows := DBMS_SQL.EXECUTE(loc_dyn_cur);
          DBMS_SQL.CLOSE_CURSOR(loc_dyn_cur);
          return out_rows;
     end;Bye Alessandro
Message was edited by:
Alessandro Rossi
There is something missing in the functions but if there is something that may interest you you can ask.

Find an iphone 5 in the club and i want you to help me find the owner and return it to the user. its been erased and no sim card in it .when i try to configure , it says i should enter an apple and a password.

find an iphone 5 in the club and i want you to help me find the owner and return it to the user.
its been erased and no sim card in it .when i try to configure , it says i should enter an apple
and a password.

Since it was erased and no sim card the owner probably got rid of it of some reason.

My mac is stuck on this page that says installing one item and its been 3 days and nothing has installed i Cant escaped from it I dont know what to do . HELP?!?!!?!!?!!

I really need help like its so weird

You've posted in a PowerPC old vintage system discussion area.
Do you have an Intel based Mac or a G4/G5 model prior to 2006?
If the computer is running OS X 10.7.5 or later, you may try to Force Quit the computer
by holding the power button down for about a minute. Then try to start the computer
in Recovery mode and if that is present, you can use OS X Utilities, and choose Disk
utility to see if repairing the hard disk drive helps.
Or from the original OS X install DVD, if you have a PPC Mac w/ OS X 10.5.8;
or if Intel Mac w/ optical drive & retail or original install-restore on DVD... Insert
the DVD and hold the C key down on startup to use tools on the Install DVD.
Or before going this far, on attempt to restart, try SafeBoot where you hold the Shift
key down after the start tone, and keep holding it until you see the login screen,
for your user password. Continue holding the Shift key down until you see Desktop
or Finder, then let the key go. This does may allow you to run Disk Utility from
the system in the computer, to see if repair disk permissions can help it.
You may have to use Recovery to attempt a reinstall of the OS X, if you have a
computer that is an Intel-based Mac. You posted in an older Mac area for items
built before 2006, that is before Macs had intel processors: they ran PowerPC.
Should the issue be the probability of whatever you were attempting to get, did not
make it, due to failure of the internet, or other issue, that may have timed out.
With poor or spotty internet, software or system updates or upgrade is problematic.
And if you were also using Wi-Fi, not an Ethernet connection, that usually is worse.
Since iOS is not a Mac OS X system, that is meaningless or not helpful in determining
anything about a Mac, or troubleshooting one. So actual related information is missing.
To supply info about your Computer, its OS X version, and other configuration specs
would help anyone else seeing your vague question.
Good luck

I tried to download google earth on my iphone. Its been 6 hours and the icon on my phone shows waiting. What can I do to delete this app?

Question: I tried to download google earth to my iphone and its been 6 hours. The icon on my phone shows waiting. I don't think this will finish so I want to delete this icon. I hold down on it until it flashes but will not let you delete. What do I do?

There was a glitch obviously. I recommend a restart. While the phone is powered on, hold the power and home button. Keep them held down while the phone powers down and starts back up don't release till you see the apple logo.

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

I downloaded iOS8 on my iPod 5th generation the other day and its been completely fine and now all of a sudden my iPod has turned off and it won't turn back on, i have tried charging it but nothing is coming up, what should i do?

the other day when iOS8 came out i downloaded it onto my 5th generation iPod, it has been working perfectly fine since, now today when i left it for a couple of hours, it turned itself off and now it won't turn back on. i have tried charging it but nothing is happening. it's not out of charge because the little battery usually comes up when its charging, but the screen is completely black and nothing is happening. i have tried turning it on by both buttons and it won't work. i don't know whats wrong with it. i haven't topped it or anything, so I'm assuming its the new download as it seems to be effecting other peoples devices as well. what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS3992 I have a message that says "This iPAD hasnt been backed up in 2 weeks.Backups happen when this iPAD is plugged,locked, and connected to Wi-Fi". Its been plugged in and connected for the past 12 hours and every time I hit the ok button nothing hap

The iPAD has been plugged in,connected to wi-fi and locked for the past 12 hours now,how can I get into my iPAD everytime I hit the OK button it turns off? Any ideas on how to get past that?

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Can a OIM User enter its own Security Qns and provide Answers to the same?

Hello there,
Is there anyway we can allow a user in OIM to provide its own security questions at the time of self registration? If so how we can achieve that?
Please throw in ur ideas?
TIA,
- oidm.

As Kevin suggested it is totally Customization.
In OIM first time while setting QA it brings the question from Lookup but after that it reads from the PCQ table only.
So as you want that User should be able to set his own Questions then no need of any Lookup *(APMK)*. You can build your custom JSP to enter Questions as well as Answers and send these data to PCQ table. It should be in Encrypted Format.
Next time when User Logs in it wil fetch the questions from PCQ table and validate the answers from that. So no need of Question Lookup.
Question Lookup we use because we want to show same questions to everyone and it is configurable and we can change the questions as per client requirement.
In your case your user are entering there own questions.

Logic User Down its been 18 hr. and counting Help!!!!!!

Similar Messages

Maybe you are looking for