Logic using 16 TB of RAM???
Recently I was working on a big Logic "Pro" project with lots of sampled instruments using Kontakt 3 and Kontakt Player. At one point Logic wouldn't load the project because it said there was "not enough memory". Very strange, I thought, since I've got 6 gigs of ram, and the project has run just fine in the past...
So I checked Activity Monitor while Logic was running to see what the RAM usage was. Activity Monitor said Logic was using "16,777,232 TB" of "real ram". ???????
Thinking this was just some strange momentary quirk, I shut down. Rebooted and started again...
Next time through, once again, Activity Monitor reported the same insane number for RAM use.
Any idea what the heck could cause such crazy numbers? Is this somehow 'normal'?
Yep, I have had the same experience, there is actually a thread about it, I'll look for it. Using Kontakt you can't adress more than about 2 Gigs of physical RAM, once Logic exceeds that number you'll get this message. One solution is to tweak the DFD settings in Kontakt, lower the DFD Ram size in the options menue, this will reduce the amount of voices you can play simultaneously but even with a setting of 12 MB you should be fine (128 voices). So the more samples you load into Kontakt the lower your DFD setting should be.
Ahh, I found my thread in the Kontakt forum not here:
http://www.native-instruments.com/forum/showthread.php?t=58615
With the update 3.5 Kontakt will go 64 Bit, on a OS running 64 Bit the limitation will be gone.
For now you can always run a standalone instance of Kontakt in addition giving you another accessable 2 Gigs.
http://www.native-instruments.com/forum/showthread.php?t=72114
Message was edited by: Sampleconstruct
Similar Messages
-
MacPro Quad Core 32g Ram running slow Logic using only 9g in Activity Monitor
Well its taken a while, but this is my first foray into the world of forums! I'm so hacked off with this regular problem and havent been able to find anything anywhere to solve it i thought i'd see if anyone has any similiar issues and maybe even a solve to it.
So.... im an orchestrator and producer and after my mid 2008 Macbook Pro with 8g ram started freezing up i invested in this 3 years ago -
Mac Pro 2x 2.4ghz Quad Core intel Xeon and stuck in 32gb of lovely Crucial RAM and 3 seperate internal 1TB drives with one for operating system (10.6.8), one for Audio recording/saving and one for all my sample libraries.
32gb ram - should be enough i thought!
So i regularly run at least 30 VI's - Ni The giant, Spitfire Orchestral librabies (say 12 string instruments up to 0.69g per load) LASS strings, plus perc STYLUS, ABBEY road drums, Trillian basses (acoustic/electric), ominisphere etc etc. So pretty hefty sample instruments. But theyre sooo nice!!
In addition, the 32 bit server will come alive (NOT! So unstable i find) with my Waves plugs etc.
Looking at ACTIVITY MONITOR however i might be not touching 9 gig (and sometimes even less) of usage for Logic, and only say 800MB for 32 bit server and have NOTHING else open - and what do i find .....
- Mouse lag and cant really do anything with the mouse whilst playing the track - cant adjust volume - too slow, zooming problems
- Takes a good 2-3 seconds for track to stop playing
Dont get System OVERLOADS so much, its just that the system goes REALLLLLY slow.
What ive tried- - -
- Running Mountain Lion off another drive (havent had time to install it and wanted to be sure everything worked etc)
- Tried all audio prefs - large/small buffers/threads etc and yes i am on 1024.
in a nutshell how come with 32g RAM everything is so slow when barely using 10g of that???????
I dread getting to the end of a project cos i know im gonna be freezing so much, but with so much editing all the time for the orchestral parts i need everything unfrozen and working.
Sorry if this is long winded but wanted to describe what im experiencing.
Any feedback most welcome! Thankyou in advance.
Mac Pro 2x 2.4ghz Quad Core intel Xeon 32g RAM, 3TB storage
10.6.8
Logic Pro 9.1.8Hi
A few thoughts:
julian6400 wrote:
In addition, the 32 bit server will come alive (NOT! So unstable i find) with my Waves plugs etc.
The 32bit server is a pita: Waves v9 are 64bit compatible (they run fine). 32 bit VI's can be run outside Logic using Vienna Ensemble Pro (see later)
julian6400 wrote:
So i regularly run at least 30 VI's - Ni The giant, Spitfire Orchestral librabies (say 12 string instruments up to 0.69g per load) LASS strings, plus perc STYLUS, ABBEY road drums, Trillian basses (acoustic/electric), ominisphere etc etc. So pretty hefty sample instruments. But theyre sooo nice!!
Some of these VI's are extremely CPU hungry: Abbey Rd drums for example, really do hammer the CPU. What does Logic's Performance meter show in the way of CPU load. What does Activity Monitor show regarding CPU load?
With 32G of RAM, this should not be the issue, but you might have general CPU problems (see above), and you may also have Sample disk streaming limitations if all the Loibraries you mention are on the same drive. How does Activity Monitor look regarding disk access? You might find it helpful to add a second drive and split the sample libraries across 2 for faster disk access.
I presume that you have plenty of free space on the System drive?
Logic can get sluggish if the Undo info gets way too big, and also if there are loads of regions in the Arrange: check Options:Project Information.
Many are finding some benefits (me included) by running the VI's in Vienna Ensemble Pro:
Better CPU load distribution than directly in Logic
"Persistant Samples": they can remain loaded whilst you switch Logic Projects
Logic is effectively running much less itself, so generally flies.
32bit Plugs hosted separately in VEP so no 32bit Bridge issues in Logic
Something to consider,though perhaps not yet, would be setting up a Slave computer using VEP.
CCT -
Logic doesen't make use of all my ram cap capacity
Why doesn't use logic 9 all of my ram memory?
For example i have the abbey road drums and that is generally knwon that it needs very much memory. But when i play it the memory load is only 1.5 GB. But i have 8 GB memory. Why it doesen't make use of all the memory?
And how is it in your set up?
Thanks for reply.. regards..Logic uses 1.5 GB because that is all it needs. RAM allocation in Logic is dynamic. It doesn't claim 8 GB when it only needs 1.5. Just create more tracks and load more AR drums, and no doubt you'll see the amount of RAM Logic uses, increase. Provided you are running it in 64 bit mode, of course. Otherwise (in 32 bit mode) it'll start whining ("my memory is getting low!") somewhere between 2 and 3 GB.
-
After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram
System Specs :
CPU : Core i7 4770k
Memory : 16 GB DDRIII
Graphic Card : GTX 770 4GB RAM
Storage : 256 GB SSD + 2 TB HDD
OS : Windows 7 SP1
Using After Effects CC 12.2.1.5
NOTE : NOT ANY ADDITIONAL HARDWARE IS ATTACHED TO MY PC . NO SOUND RELATED EQUIPMENT NOR CAPTURE CARD NOR ANY THING ELSE
Hi there
As you Already Don't know I'm an After effects Specialist Using it for quite long time . There is an Ancient Problem with CS6 CC versions . I have a short Small size 1080p Video , about 8 MB , I drag it into project panel and then put it into timeline hence it creates a sequence . There are no Effects and nothing added to timeline , just a small simple video . The Strange Problem is when I click "0" for ram preview , The video starts playing and the green bar above timeline starts to fill . When Ram preview Finishes and plays the video from beginning I See there are several frames Between which are not being loaded to Ram ! The video plays RGB color bar instead of main video and when I check the Green bar above Timeline I see that those frames are being dropped and there is no Green bar above them !
I have had this problem several times before but this time it is too important and the problem should be solved . What is obvious is that some frames are not being rendered or are being deleted after render !
Another Strange problem is that when I open Task manager , It shows AE uses around 10 GB ! of RAM when I press "0" for Ram previewing this video !
So there is a Logical explanation here , Somehow when I do ram preview this video it uses extra ordinary too much ram so AE is unable to load the full video (8 MB) into Ram and hence deletes some of frames .
most of my videos have not this problem and use acceptable amount of ram .I've had this issue with some of my videos till now .
Listen carefully : "This has nothing to do with AE preferences or low memory or plugins . because there is nothing wrong with any individual components of may hardware or software . I have far more than enough RAM for a 8MB video . My Memory has no hardware or software problem . I tested them and if there was any problem with memory or other hardware that should have affected other applications . I have the most recent AE version . I have the most Recent windows updates and drivers . I have a Clean virus free system , and as a computer engineer this strange AE problem is rarely caused by viruses , trust me . I have not any hardware instead of ones a normal PC has . I have not any problem with my whole entire system configuration because I have benchmarked my PC with several up to date softwares . I have tested my PC with almost any STRESS TESTING solutions available for really long period of time , 3 days by IDA64 . Not any driver conflict , dll missing , registry problem have been discovered , as I know perfectly how to solve them ."
I asked some of my friend whom are expert in AE . I handed them my videos and Watched ALL OF THEM HAD THE SAME ISSUE ! So the problem isn't related to my Local PC . What i believe is that there is some malfunctioning or miss coded part in AE source code that decides to reserve such a huge strange amount of ram for such a tiny 8MB video . The point is that the AE works fine , no crash or any problem report . So the AE it Self decides to allocate such huge amount of ram and thinks it is correct ! So I think this is a work around that AE developers in adobe are using to bypass a problem or conflict ! by Using more amount of RAM . I think that there might be some miss understanding between the AE and my installed codec . I installed MEGA CODEC PACK on my PC to enable some new codec supports , and so are some of Windows default de/encoders changed to new ones . I think there shouldn't be any problem But there is something wrong between AE and de/encoder modules !
Please any one with any suggestion , I really appreciate your advices .###UPDATED###
Well thank you guys for your patience ...
as you considered I forgot to mention the codec itself and other stuff ...
The video is in 1080p , 35 sec long , it is a green screen shot , this video is directly downloaded from YouTube and plays perfectly on all tested PCs . here are detailed info :
Format : MPEG-4
Format profile : Base Media
File size : 8.55 MiB
Duration : 34s 993ms
Overall bit rate mode : Variable
Overall bit rate : 2 050 Kbps
VideoFormat : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Bit rate : 1 927 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Frame rate mode : Constant
Frame rate : 30.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
NOTICE : This video is just for testing the lighting and etc , and so the Sampling and other specs are not considered for broadcast .
I think you hit the point ! Thats K-lite codec pack installed on every machine which the video is tested on ! The point is whats wrong with it ?! I have had never ever any problem with this codec pack !!!
The deadly question : So what are the alternative ways to work with codecs that AE doesn't support ?! because installing codec looks simple and sufficient ! -
Logic has an appetite for RAM - but only this week
Greetings.
I'm using the Mac Pro at work, so ignore my signature specifications.
This week Logic has completely swallowed my RAM, both on session with lots of tracks and plug-ins, and also on the light sessions where there would never usually be a problem.
A colleague installed the Sonic Birth plug-in last Friday. Could this have contributed to some weirdness?
Even without a session open, just the application running on its own, it's eating up 1.06 GB of real memory (according to Activity Monitor). This seems a trifle odd. I'm not running anything else out of the ordinary.
The Mac's specs;
2x 2.8 GHz Quad Core Intel Xeon
2 GB RAM
OSX 10.5.8
Logic 8
I am aware that 2 GB is not a lot of memory for a Mac Pro, however it's been running fine for the past 10 months so I don't believe that is the issue. If anyone can offer a suggestion, I'd be most grateful.Macintosh Lou wrote:
Greetings.
Even without a session open, just the application running on its own, it's eating up 1.06 GB of real memory (according to Activity Monitor). This seems a trifle odd. I'm not running anything else out of the ordinary.
On my system both Logic 8 & 9 use less than 200MB real memory, even with my default project open, with no project open it's less. You're sure there's not something open in the background? Logic-8 does use about 1GB virtual memory, Logic-9 uses about 1.6GB virtual.
If you think the problem is Plugin related you can always move 3rd party plugins out of your components folder for testing.
pancenter- -
Hi,
I have copied these problem on you site, as I could explain better then what they did, wich my problem remain the same as they have. And part me explaining what is really happen to my Laptop.
''Mozilla/Firefox 4 will not SHOW on my computer SCREEN.
Firefox won't load onto my computer. I have Windows 7, and each time I try to run the program to install it, it tells me I have another version still waiting to be installed that requires my computer to reboot. When I check "yes" to reboot, my computer reboots but still no Firefox. When I try to uninstall the the old Mozilla program from my Control Panels, there is no Mozilla files or programs listed not in my list of programs but when I go directly to the Windows File on the C: Drive, there's a Mozilla program file there. WHen I go into that file check, I attempt to open the uninstall program. I get an error message that says something to the effect of: "the version Mozilla on this computer is not compatable with my OS." Something about it being and 86bit program. My Firefox 3.6 worked fine 2 days ago. What's wrong??? ''
'''Firefox 4 using huge amounts of RAM on sites with Java scripts
I have been observing Firefox using huge amount of RAM when I am on sites that use Java Scripts to rotate images. I have tried a couple of different sites and have monitored the RAM usage. With Java script enabled Firefox 4 continues to grow its RAM usage by about 10MB a minute. I have had the usage hit as high as 1.5GB. As a comparison I have monitored the same sites in Internet explorer and have not seen the same issue. - Just to eliminate a site issue.
Turning off Java Script solves the issue and eventually frees the RAM.
I am using XP Pro, 3 GB RAM. '''''
My experince with Mozilla Firefox:
Here what really happen when I install the Mozilla Firebox on my La[top you can see the file is there but when I click the program to open its does not shown on the screen but when I check with WTM (Windows Task Manager) its shows that is ON and you can only witness the laptop going very slow and I have to reboot it, and I can not install any other Mozilla :( because of the same problem and all the above.
I really need Mozilla to work as soon as possible due to important deadlines I have pendent, and i can only use Chrome but is not my ideal program. Can you help me , please ?????
Thank you
Vitor MendesIf it opens in safe mode, you may have a problematic add-on. Try the procedure in the [[Troubleshooting extensions and themes]] article.
-
Early 2013 13" MacBook Pro runs slow and uses a lot of RAM, why and what can be done?
Problem description:
My computer is using a lot of RAM. Wondering if there’s a hardware issue, or a software issue, or something else. I currently have no programs open in the Doc, besides EntreCheck. and the RAM is showing about 75% used. I’m looking for suggestions on what I can do to speed it up and make it more functional, and efficient for doing design work. I recently upgraded from the original 4GB RAM (2x2GB), and from the original HD to a 512 GB SSD drive, and upgraded to Yosemite. Perhaps that was too much for this machine? Please help with anything that I can do to make it better! Thanks in advance!
I have a recent back-up, I'm open to saving user files and starting from scratch with the current hardware, etc... but would need some direction on how to do this. I did upgrade myself using Apple provided instructions.
Here are the EntreCheck results:
EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 12:45:57 PM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2 days 0:17:23
Disk Information: ℹ️
Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SuperCool (disk1) / [Startup]: 510.88 GB (320.22 GB free)
Core Storage: disk0s2 511.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Microsoft Microsoft® Nano Transceiver v2.0
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Western Digital My Passport 070B 319.37 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
NATURE2020 (disk2s2) /Volumes/NATURE2020 : 319.03 GB (169.27 GB free)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.security.cloudkeychainproxy.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.hp.productresearch.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.surteesstudios.hddfancontroldaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
iTunesHelper UNKNOWN (missing value)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Google Drive ApplicationHidden (/Applications/Google Drive.app)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.6
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
AllMyTube
3rd Party Preference Panes: ℹ️
Flash Player Support
Growl Support
HDD Fan Control Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
SuperCool: Disk size: 510.88 GB Disk used: 190.66 GB
Destinations:
NATURE2020 [Local]
Total size: 319.03 GB
Total number of backups: 4
Oldest backup: 2014-09-10 17:52:44 +0000
Last backup: 2014-11-19 21:23:34 +0000
Size of backup disk: Too small
Backup size 319.03 GB < (Disk used 190.66 GB X 3)
Top Processes by CPU: ℹ️
22% mds
6% WindowServer
4% Creative Cloud
3% Dropbox
0% Google Drive
Top Processes by Memory: ℹ️
223 MB Finder
137 MB mds_stores
120 MB Dropbox
86 MB Creative Cloud
86 MB WindowServer
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.82 GB Active RAM
1.64 GB Inactive RAM
1.59 GB Wired RAM
14.83 GB Page-ins
2.06 GB Page-outsLex...
Here's the new EtreCheck that I just ran. At a glance, it seems I may have missed deleting some things or they are stored in an additional location? I haven't jumped into anything yet to really test if there's a difference in performance for me. Once I do I will post that information.
EtreCheck version: 2.0.11 (98)
Report generated December 3, 2014 at 8:46:56 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 12:43:15
Disk Information: ℹ️
Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
SuperCool (disk1) / [Startup]: 510.88 GB (322.45 GB free)
Core Storage: disk0s2 511.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Microsoft Microsoft® Nano Transceiver v2.0
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.adobe.AdobeCreativeCloud.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
SuperCool: Disk size: 510.88 GB Disk used: 188.43 GB
Destinations:
NATURE2020 [Local]
Total size: 319.03 GB
Total number of backups: 4
Oldest backup: 2014-09-10 17:52:44 +0000
Last backup: 2014-11-19 21:23:34 +0000
Size of backup disk: Too small
Backup size 319.03 GB < (Disk used 188.43 GB X 3)
Top Processes by CPU: ℹ️
7% WindowServer
1% launchservicesd
0% launchd
0% fontd
0% Core Sync
Top Processes by Memory: ℹ️
103 MB mds_stores
86 MB Creative Cloud
86 MB Finder
77 MB WindowServer
60 MB systemstatsd
Virtual Memory Information: ℹ️
3.93 GB Free RAM
2.28 GB Active RAM
900 MB Inactive RAM
1.48 GB Wired RAM
2.25 GB Page-ins
0 B Page-outs -
Write an UPdate statement using the logic used in PL/SQL block (oracle 10g)
Hi All,
I have written the following PL/SQL block. I want to write an UPDATE statement using the logic used in the following PL/SQL block. can any one please help me out in this regards.
DECLARE
v_hoov_fag gor_gold_post.hoov_flg%TYPE;
v_b49n gor_gold_post.b49n%TYPE;
CURSOR c
IS
SELECT bs_id, loyalty_date, loyalty_period, contract_date
FROM gor_gold_post
WHERE tariff_code IN (169, 135, 136);
BEGIN
FOR rec IN c
LOOP
IF (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
- SYSDATE) < 304
OR ( TRUNC ( ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
- SYSDATE
) IS NULL
AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2
THEN
v_hoov_flg := 1;
ELSE
v_hoover_flag := 99;
END IF;
IF (TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
- SYSDATE) < 121.6
OR ( TRUNC ( ADD_MONTHS (rec.loyalty_date, rec.loyalty_period)
- SYSDATE
) IS NULL
AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2
THEN
v_b49n := 1;
ELSE
v_b49n := 99;
END IF;
UPDATE gor_gold_post
SET hoov_flg = v_hoov_flg,
b49n = v_b49n
WHERE bs_id = rec.bs_id AND tariff_code IN (169, 135, 136);
COMMIT;
END LOOP;
END;Thank you,Using case statement.
UPDATE gor_gold_post
SET hoov_flag = CASE WHEN TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) < 304
OR
(TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) IS NULL
AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2)
THEN 1
ELSE 99
END,
b49n = CASE WHEN TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) < 121.6
OR
(TRUNC (ADD_MONTHS (rec.loyalty_date, rec.loyalty_period) - SYSDATE) IS NULL
AND (SYSDATE - TO_DATE (rec.contract_date, 'YYYYMMDD')) > 91.2)
THEN 1
ELSE 99
END
WHERE tariff_code IN (169, 135, 136);Note: Code not tested. -
Skype using High levels of RAM over time
So recently i've noticed that Skype has been using increased levels of RAM over time. Before i think 7.1 it sat at a steady 170k or lower but since the recent update, it seems to scale all the way up to nearly using 80% of my RAM after being on for an hour. Is there a reason this happens or is it a memory leak issue?
Hi,
I'm having the same issue as you.
For my situation, with Windows 7 Ultimate 64bit, with 8 GB of RAM available, Skype use randomly from 400 Mb to 1.5 Gb of Ram slowing down all the PC..
I have to kill the Skype process for working well.
My SKYPE version is 7.3.0.101.
I need to resolve this problem (and, from my point of view, uninstall the newest version and install the older one is not a solution)
Thanks in advance
Andrea -
Hello Everybody,
I´m using the Rate Application for currency conversion but i still dont understand the logic applied when we run the FX_trans calc, i have 2 Business Rules one for Average and other for . Does anyone knows whats the logic applied? i need to understand this in order to get the value i want when a charge the different rate types.
Thanks in Advance
NidiaThanks for your responses,
Maybe i need to explain better. I´m using BPC for Microsoft v7.5 SP4 and configured all the dimensions, properties, Business Rules and Fx_trans.lgf as shown : *RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%VERSION_SET%','USD','GLOBAL','%SCOPETABLE%','%LOGTABLE%').
Using BPC for Excel, when i load the rate type values, for example in order to convert MXN to USD i load 10 in this CV:
Flow dim- non flow member
Currency dim- USD member
Datasource dim- calculated values
Rate-account dim- Average
Then i go back to the Financial Application and run the FX trans package, but the values obtained do not match with the exchange rate of 10 that i have stored in rate application. For example i have 83 392 in one account in MXN, after the calc is runned i'm supposed to get 8 339.2 but instead i get 43 781.
The MD property in input currency dim is set as "D"
What value do i have to store inside the rate application in order to get the correct amount? what's the logic (and i mean like mathematical logic) used for currency convertions?
Thanks a lot -
Apple Contacts Uses a lot of RAM?
Since installing Mt Lion, and when running Contacts, I keep getting a lot of diskactivity, machine slows way down, and this one app uses 5GB of 6GB ram. What is going on?
Does anyone else have this problem or know of a solution? Whenever I try to scan more than a few pages at a time, my computer slows down to a crawl.
I think the issue stems from the Overview scan, which goes directly into memory...One overview scan took Image Capture's RAM usage from ~18 MBs to over 200. After a second Overview scan, RAM was up from 210.4 MBs to 390.2 MBs. A third takes it from 386.5 to 476.0.
Obviously, this is a major issue, as I only have 2 GBs of RAM. I know that I can get 4 GBs, although RAM prices are high at the moment, but the fact that this program still takes up so much is not good. Is there a way that I can "purge" old overview scans from RAM?
Message was edited by: musicwind95 -
Yosemite is using a lot of RAM (about 5GB) in my MAC, why?
Yosemite is using a lot of RAM (about 5GB) in my MAC, why?
The article below, although written for Mavericks, applies to Yosemite as well.
http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/ -
What is the logical use of defining Dimension Object Relationships in DBI?
Hi!
I am reading the Oracle Daily Business Intelligence Implementation Guide and as I am following the guide on how to extend DBI, I saw a section which discusses how to create dimension object relationships. Until now, I could not fully realize what is the logical use of defining this relationship among dimension objects. I hope someone can enlighten me on this matter...
Thanks.It LIVES ON FOREVER, and starts to take on its own personality, hungrily chasing down other objects in memory and ATTACKING THEM AT WILL. Also it grows over time, in its evil attempt to CONSUME YOUR ENTIRE MACHINE, and comes out and EATS YOU UP TOO! MWAHHHAAAHHHAAAA
No wait, that was a sci-fi. It just lives until no more references to it exist and thus becomes eligible for garbage collection, and is only a "JAVA" feature not JDBC. -
IMovie 09 uses up 4GB of RAM in less than 2 minutes
Hi,
The topic says it all i think..
To be honest i don't know if i had this issue before Snow Leopard i have only been using it for about a week. I have a MacBook Pro (Early 2008) 2.6GHz with 4GB RAM installed. I have never had any issues with the RAM being used up this fast before ever (and i'm a pretty heavy photoshop user and gamer).
With just a simple project and little events i make a short clip, some transitions and a background tune. Then i minimize iMovie to check my Mail or another app and notice the mac became horribly slow and minimizing takes a good minute. Then i check Activity Monitor and iStat Pro to find within just a few minutes i not only used up 4GB of RAM but only am well into 4GB Swap File usage, i need to restart to turn my Mac back into the fast Mc it was before i started iMovie.
Before writing this i did a few tests with garageband and a couple of other apps including Adobe Suite etc... i still have a little over 2GB RAM free. Then i start iMovie, open my project and mess around a little.... wham, RAM gone, is this what's known as a memory leak ?
Any thoughts on this? I started experimenting / learning iMovie because i have a wedding DVD to make soon, i need this software to work right.
Thanks in advance
JayMPEG2 and AVCHD are two different codecs. Your footage will be one or the other, but not both. MPEG2 is used more often in standard definition cameras.
Having said that, your memory problem is unusual. iMovie uses a lot of memory, and if you are constrained on memory, it uses swap files. However, mine has never used up 4GB of real memory in 2 minutes. It looks like you have a memory leak somewhere (which could be a bug in iMovie).
I don't know how to find it since I can't replicate it on my system.
One thing that may help you monitor this is the free application called [MemoryStick|http://www.tidbits.com/matt>. You can install it and monitor your swapfiles real time. You can also see how much real memory and virtual memory iMovie is using at the moment through Activity Monitor (which I presume you are already doing.)
With MemoryStick, if I notice that I have 5,6, or 7 swapfiles going, and they are over 2GB (they have been as high as 4GB) then I know it is time to re-boot. -
Xorg.bin use a lot of ram Catalyst
Hello! After installing catalyst from Violo's repo i have noticed that Xorg.bin use a lot of ram(when i start the laptop it is 25mb but it keep rising till it get to 1.5gb in about 2h and I restart to free memory) This is on X-server 1.7 and now i downgrade to 1.16.4 but no effect. Can someone help me please. Thank you!
elll wrote:Do you know how to downgrade catalyst? Should i use pacman -U catalyst? [link]https://wiki.archlinux.org/index.php/Do … s#Warnings[/link] And if yes do i have to downgrade Xorg too because i allready do that?
The nicer way to do this is to use the [catalyst-stable-14.X] repository databases in this manner (where you replace X with the corresponding number):
[catalyst-stable-14.X]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
elll wrote:Does someone know how to fix this issue or if there will be released fix for this?
No idea. Ask the AMD Developers upstream.
Last edited by clfarron4 (2015-02-18 11:08:30)
Maybe you are looking for
-
Segment field is not shown in profit center master data
Hi, When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ? Thanks.
-
My followers are not showing up in Firefox with network blogs, it shows up in Internet explorer??
This is pretty straight forward. My followers, I have 102, for Network Blogs, I cannot see them in Firefox. People are telling me they can see them. And I can see the faces of my followers in Internet Explorer??
-
FPGA compiler Server status says idle but Status says compiling VHDL
when i compile my FGPA vi file , after some time in the compile server window "Server status" shows "idle.." but the status box shows "Compiling VHDL". It stays in this condition for a long time about 30 mins. Why is this happening? I am also attachi
-
Autostart Apps after software update
hello, i installed the latest update of microsoft apps and social on symbian belle 700. after which there are a lot of apps which start when the phone starts, infact, even if i open the sms, the email server starts, it is using memory. I uninstalled
-
Today I have a problem with my nokia x6 8GB , I using my x6 normaly as I using every day...but today my x6 is suddenly hanged , after hanged my x6's touch screen is not working , any button is not working...then I remove the battery o