Logic v9.1.7: problems in renaming busses

has anyone a solution when busses cannot be renamed in Logic?
After renaming them in the Label I/O area a restart brings back the old names.
There is no file in Application support anymore that held this data, so I am stuck what to do here.
Any serious help appreciated. Thanks.

Thank you for your suggestion. The crash being reported was around a plugin, Omnisphere, so I contacted Spectrasonics too and they also suggested trying 64-bit mode.
This has solved the problem, and I haven't found any adverse affects of running in 64-bit (yet).
Cheers.

Similar Messages

2x iMac G5: Both Logic Board and Display Problems, Warrenty?

Hello,
Thank you for looking at this topic.
I am Jeroen from The Netherlands and proud owner of several Mac Mini's, iMac's and Macbook's. I have 2times the iMac G5, a beautiful machine, but both not working since 2 months.
I have two times the iMac G5 with iSight, both have logic board and display problems.
The first iMac doenst start at all, black screen, i hear the chime, but nothing happening. After a minute i see one horizantal white stripe but nothing happens.
The second iMac has weird horizantal stripes also, but the computer starts. It gives a finder and questionmark icon. After a while the fans go crazy.
Both these symptons are widely known on the internet. I would like to get this fixed, but prices are crazy. And because this is a common issue I would expect to get this fixed for no costs. I have contacted several Apple resellers but they shown me high prices and bad services. On these forums I've saw people in the USA who get this fixed free of charge.
Does anyone has any advice for me? I'll call apple USA this morning.
Thankyou for ur time.

Welcome to Apple Discussions.
I know of no repair extension authorization which provides for the repair of either computer you describe beyond its original 12 month period of coverage. If either machine is covered by a warranty extension program provided by AppleCare, then the parts, labor or both required to replace the defective components may be offered at no charge to you. Final determination of eligibility is made at the part level by authorized Apple service providers or dealers and by the specific serial number of the machine submitted for service.
Absent a warranty extension, however, it is quite likely that you will have to pay for the repairs is you elect to have them performed.

MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps

Problem with rename command in ftp_command

hi all ,
i am facing a problem in renaming a file by rename command...
this is how i am calling the fm ftp_command
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      handle        = g_handle
      command       = 'RENAME l_templine_file l_templine_file1'
    TABLES
      data          = l_i_temp_line
    EXCEPTIONS
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      OTHERS        = 4.
IF sy-subrc <> 0.
here l_templine_file   - dev00227.header.tmp
l_templine_file1 - dev00227.header.txt
the fm is failing that the error meassage is FTP subcommand error
can u suggest where i am going wrong in this...

hi,
May be the command you are passing is incorrect syntax..
Pass the values like this..
l_templine_file = 'c:\dev00227.header.tmp' " this should be with path'
l_templine_file1 = 'dev00227.header.txt'" this is just the name of file
If not worked..then Try writing in small letters//
write
command = 'rename l_templinefile l_templine1'.
rewards if useful
Hope this solves..
regards,
nazeer
Message was edited by:
        nazeer shaik
Message was edited by:
        nazeer shaik
Message was edited by:
        nazeer shaik

A litle problem with rename method.

Hi everybody..
I have a little problem with renaming files..
I can rename files but it puts the new renamed files to BIN directory (where my program runs) whereever the path I opened the old-original image. I want to pu the "renamed file" where it belongs to,the orginal path, How can I handle with it?
My code is like this..
String renamestring = JOptionPane.showInputDialog ("Enter new name for image");
File file2=new File(renamestring+".gif");
boolean success = f.renameTo(file2);
I have another question if you do not mind..How can I rename files with their orginal extensions?? for example in the above code ı rename all file with .gif extension, (if I Dont do that, it does not give any extension to the new renamed file..)
thanks so much..

Now, I'm a bit shaky on files, I've only used them to store dummy data, but here's my two cents.
It's putting the files there because, as it appears from what you've cited as your code, you're using a relative filename. something like pic1.gif. This will be put whereever the program is running. What you want is to make your file using...
String PATH_NAME = "<Directory you want it stored in>";
File file2=new File(PATH_NAME + renamestring + ".gif");There are a few ways of getting where it should be saved, but since I'm not sure what system you're on, I'm not going to go into it. Simply put, I think you can just search from the back to the String (originalFile.getPath()) for the last folder deliminator (i.e. "\"), then take that and everything before it as the PATH_NAME.
As for original extension, you can try the same thing. Start at the end of the file name using the String's lastIndexOf() function, and find the period. Then take the period and everything until the end of the string as a new String fileExtension.
String PATH_NAME = "<Directory you want it stored in>";
File file2=new File(PATH_NAME + renamestring + fileExtension);

I have upgraded to Mac OS X ver 10.6.8 now my logic 8 is having problems... is there a fix

I have upgraded to Mac OS X ver 10.6.8 now my logic 8 is having problems... is there a fix

_TO_ 10.6.8? No, that should work. You don't say what kind of problems you have.

Weird flashing problem - cannot rename any file or folder in Movies

I have a problem affecting just my Movies folder. Whenever I view it in the Finder, the edge of the Finder window will flash once every four seconds. If I am trying to rename an item within the Movies folder when the flash happens, I get dumped out of the name editor and the file or folder is given the partially-typed name.
It only happens when I'm viewing the Movies folder in the Finder. Any ideas?
Message was edited by: Gareth Randall2

What do you mean by "flashing"? Can you post a video or photos for us to see?

Logic 7.1 MIDI problem (Digi 002)

A year ago, I bought a dual G4, a Digi 002, and started recording. After realizing I was using GarageBand more than ProTools, I bought Logic Pro. Of course, the 002 isn't a supported interface, but I could still use it as an input device - I could have my microphones, guitars, etc. pugged into it. I was also able to have my keyboard plugged into the MIDI IN on my 002, and I could use it in Logic. My only use for it is to use the audio instruments, to create strings, etc.
Somewhere in an update, things changed. Now, Logic doesn't seem to recognize any MIDI coming from the 002. I have trashed prefs, messed around with the AudioMidi setup... in the AMSetup, I can see my 002, and I can add in my keyboard, and cable it to the MIDI port of the 002. I get nothing in Logic.
Another change (in case these are related): At the same time, whenever I open a new Logic project, the "output" track (says "output 1-2) has a red X through it. I can manually change that, but it is weird.
What I want to be able to do is play my keyboard and have it make sounds through the audio instrument tracks.
In my transport window, it used to show the note I was playing when I hit my keyboard. Now it says No In, No Out.
Details:
OS 10.4.2, CoreAudio 6.9.2, LogicPro 7.1
I lost MIDI BEFORE I went to 10.4 and after I went to CA 6.9 (tried reverting that but it still didn't help), and after I went to QT 7 (reverted but that didn't help either).
Anyone know what's going on?
I am a real noob when it comes to the environment. I have several logic books, but I still can't grasp it. I have the feeling I could solve this in the environment, but I'm not sure how.

Dirk, recently a whole load of musos like yourself started having problems with their misi setup following a security update from apple. The culprit seems to be update 2005-007. Anyway I spent hours trying to get my Logic Pro 7 to work properly again and after re-installing everything from Logic to the midi and audio drivers for my outboard midi and sound card to running first aid and doing permission repairs etc, I eventualfly went for the drastic step of doing an archive and re-install of my OS X.
How to do it properly is listed here:
http://docs.info.apple.com/article.html?artnum=107120
Follow the instructions and reboot.
You will then need to run the software updates up to but excluding security 2005-007
You may fing some of your other 3rd party software may need to be re-insatlled after this and possibly some of your drivers for midi. But take it step by step. After the archive and install, run your software update from the apple menu then try to run Logic as normal. If any errors come up concerning midi timing etc, quit and re-intall your midi drivers from the latest update at the manufacturers site. Then try Logic again after rebooting.
Hope this helps.
By the way, it took me 2!/2 hours to do all theat, so patience is needed!
best regards
martin
When Apple finally get round to sorting out what is causing this they may do a patch update. In the meantime this was how I got back up and running.

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Little problem with rename view

Hej, I've been having a problem an small problem with this... so far i'm changing the position of the tree of and Active Directory account... the major problem is that if i move this account 3 times the accountId fot that resurce is still the original one.
<set name='newViews.newAccountId'>
                <ref>myIdentity</ref>
              </set>
              <set name='newViews.accounts[AD].newAccountId'>
                <ref>myIdentity</ref>
              </set>
              <set name='newViews.resourceAccounts.selectAll'>
                <s>false</s>
              </set>
              <set name='newViews.accounts[AD].identity'>
                <ref>myIdentity</ref>
              </set>
              <set name='newViews.accounts[AD].newAccountId'>
                <ref>myIdentity</ref>
              </set>
              <set name='newViews.resourceAccounts.currentResourceAccounts[AD].identity'>
                <ref>myIdentity</ref>
              </set>
              <set name='newViews.resourceAccounts.currentResourceAccounts[AD].selected'>
                <s>true</s>
              </set>
              <set name='newViews.resourceAccounts.currentResourceAccounts[Lighthouse].selected'>
                <s>false</s>
              </set>myIdentity is the new value for the account basically cn=..,ou=.. etc.. and all works fine but the first given accountId when the account is created always remains and is never changed during the rename action....

Hi,
I had the same problem. The move operation in AD functioned perfectly but the displayed account information kept showing the old DN. The problem was, I had the move activity inserted in the update user workflow BEFORE the Provision activity. I moved my custom rename activity to AFTER Provision (and right before notification) and now the new DN is showing on the account information screen. It appears that if you do the rename before provision, the old information will overwrite the new stuff. But if you do it after provision the new stuff will overwrite the old stuff.
I hope this helps :-)

Logic Pro 9 Midi Problems Multiple Devices

Hello, im having issues with using multiple external devices in Logic Pro 9. I have a virus TI 2 and a prophet hooked up to a Saffire Pro 40 audio card which I am using the Midi Hub.
Basically, If I have an external instrument (prophet) playing on a track I have to turn the virus off or else there is midi problems communicating with the prophet 08.
The Biggest issue i'm having here is that when the midi data in the external instrument track is playing, if I'm selected on the track while its playing, I get an extreme cluster #$)* of midi on the midi input display and it completely and utterly destroys what the prophet is trying to play into logic.
In my Midi setup on Mac Snow Leopard, I have the ins and outs of the prophet going to the saffire pro 40. The virus is connected and playing midi via USB.
Anyone know how I should be setting this up so the midi information is not getting messed up? Yes, I have consulted the user manuals.

Not: My ZED R Mixer connected FireWire 400 800 cable with iMac

Logic for this math problem

Before I get stinker replies for cross posting , let me tell that , i have been recommended to post this in this forum.
My problem is such:
I need to find a logic to implement the following :
In the floating point number , say , 1.0.. the Integral part will remain constant(1) but the decimal part has to get incremented by 1
1.1 +0.1
1.2+0.1
1.3+0.1
1.4+0.1
1.5 +0.1
1.6+0.1
1.7+0.1
1.8+0.1
1.9+0.1
1.10+0.1
1.2... But what I need here is 1.11 ,1.12
I need my programming logic to detect there needs to be a change in the increment value from 0.1 to 0.01 when I reach 1.1
and from 0.01 to 0.001 when i reach 1.111..so on,
please suggest..

you can't do it with a double,
since double d = 1.10d; will be treated as 1.1d
what you can do is treat the double as a String
public void test(){
String s1 = "1.9";
String s2 = "1.10";
String s3 = "1";
String s4 = "1.1";
System.out.println(increment(s1));
System.out.println(increment(s2));
System.out.println(increment(s3));
System.out.println(increment(s4));
public String increment(String d){
int pos = d.indexOf(".");
if (pos != -1){
if (d.charAt(d.length()-1) == 0)
return d.substring(0, d.length()-2) +
ength()-2) + "1";
String temp = d.substring(pos+1);
int num = Integer.parseInt(temp);
num++;
return d.substring(0, pos+1) + num;
else
return d + ".1";
}gives
1.10
1.11
1.1
1.2
I leave it to you to understand the logic...it's to
get you started..it does not check for all conditions
of the inputI think it is a Math with algorithm problem. Your solution is good, but you are using String functions so much. There is other solution, handling with numbers only.

Cluster Disk Logical Disk Performance Counters Problem

I have some problem with Oracle cluster. It's a two node Windows server 2008 R2 SP1 cluster with MS Failover cluster. I have SCOM 2012 SP1 with latest OS MP (agent running with local system rights). All other cluster are showing fine performance counters
but this cluster does only show one cluster disk free space counters. It has 5 cluster disks (MBR formatted). Logical disk performance counters are running fine. So my questions:
What performance counters does the new "Cluster Disk % and MB free space rule" use? Is it the same old Logical Disk performance counter that collects data for example for drive C:?
What should I check from this cluster because performance view from my cluster groups are not showing all disks, just one and there are 5 cluster disks?
Only one Cluster Disk is showing under performance view!
Health Explorer from Cluster group shows all Cluster disks!

We have this issue with normal Win server 2008 SQL servers. I can see disks at the Health Explorer view but no collection rules at the performance view. Rule does not have any overrides and it's enabled by default. We use the latest Core OS pack and Cluster
MP. IS this ANOTHER bug in the MS management pack?

Problem when renaming iPhoto Library

I recently renamed two iPhoto Libraries. A day later I plugged in my external HDD to do a Time Machine (TM) backup and noticed that TM deleted ALL my previous backups except the last one, stating there was not enough space.
My conclusion is that renaming these libraries caused TM to see them as NEW libraries and wanted to back them up all over again, meaning I needed 40GB of space rather than the 15GB available and let to the deletion of all my previous backups (without warning)!
I have posted about this in the TM forum, but decided to mention it here as well to warn others of this potential problem.

problem when copying iphoto library from ext hd to ext hd. stops after 2 gb saying there was data with same name on target hd. but that one is brandnew and freshly formatted.
How are your external HDs formatted? Both need to be formatted MacOS Extended (Journaled, not case sensitive) to work with iPhoto.
If the file system differ, you may have problems with ambitious filenames, for example, if one drive is case sensitive and the other not.

Need Help - Problem: Cannot rename the file

I hv three type of file, which is original file, processed file and edited file. Then, my goal is change all the three type of filename after i edit and save the document...
My problem is sometime it can be changed, but sometime it just change either one or two type of filename only.....
Can somebody to help me........10s first....
Below is my coding.....
String nfilename = tokenString[0] + "_edited";
File original = new File(directoryname + "\\" + "original" + "\\" + tokenString[0] + ".txt");
File noriginal = new File (directoryname + "\\" + "original" + "\\" + nfilename + ".txt");
boolean success1 = original.renameTo(noriginal);
File process = new File(directoryname + "\\" + "process" + "\\" + tokenString[0] + ".xml");
File nprocess = new File (directoryname + "\\" + "process" + "\\" + nfilename + ".xml");
boolean success2 = process.renameTo(nprocess);
File edit = new File(directoryname + "\\" + "edit" + "\\" + tokenString[0] + ".xml");
File nedit = new File(directoryname + "\\" + "edit" + "\\" + nfilename + ".xml");
boolean success3 = edit.renameTo(nedit);

I have some problem when I rename file that have filename in thai language.
I think may be it's depend on locale, I changed locale to TH but it's not work yet.
some body help me

Logic v9.1.7: problems in renaming busses

Similar Messages

Maybe you are looking for