Logic Will Randomly Lose Phantom Power

I have an Apogee One running into Logic Studio 9. On the Apogee One, I am running and XLR cable to an Apex Microphone, and a 1/4" cable to a guitar (At Different times). When recording either the Guitar, but most commonly with the Phantom Power on the 48V Input, the Microphone will drop out temporarily and not pick up any sound, then slowly it will fade back in. This happens every couple of minutes during a recording. We have already replaced the Apogee One, but the issue still seems to occur.
Any Suggestions?

Hi
This sounds like an issue with the audio interface, not Logic. Does the interface work ok on another computer? If it can, run it with a separate power supply, rather than bus-powering from the Mac.
CCT

Similar Messages

  • My iPhone 4s will randomly pop the power off menu on

    So just out of the blue my I phone 4s is trying to turn it self off and my power off button does not work. Please help

    I'm having a similar problem with my iPhone 4s.  Just loaded all of my play lists onto it and it shuffles the order on some playlists but not others.  It is not a matter of shuffle being selected anywhere.  In fact when I connect my iPhone to my Mac and look my play lists in iTunes, they appear in the correct order.  When I view my playlists on my iPhone, some appear in a random order.  The suggestions to turn shuffle off have not helped since nowhere does shuffle appear to be on.  And I have the "shake to shuffle" turned off as well.  I listen to a lot of continuously mixed music so these randomizations of my playlists are very problematic.  I didn't have this problem at all with my iPod Touch. Should I just try deleting the troublesome playlists and reinstalling them?

  • If I have a trial of Acrobat Pro XI will I lose my work when the trial is over?

    If I convert a PDF to a Microsoft power point and edit/make notes, will I lose the power point and/or any changes once my trial is over if I decide not to purchase?

    No. Once you convert a PDF to another format it has nothing more to do with
    Acrobat.
    You won't lose any PDF files, either, after Acrobat the trial is over, by
    the way. You just won't be able to open them unless you buy Acrobat,
    install Reader, or another 3rd party PDF viewer.

  • Firefox randomly loses window focus.

    When using firefox, the window will randomly lose focus so that I cannot scroll with the mouse wheel or keypad. This seems to happen randomly or usually a minute or two after I open firefox for the first time after restarting or powering on my computer. I am running the most recent version of firefox and the most recent version of adobe flashplayer. Why is this happening and how can I fix this?

    I think Adobe might have solved this by now, but there used to be a problem where when you launched a new window using Flash, you would get switched to a different window. The workaround was to disable the protected mode feature of the Flash player plugin. It has security benefits, but seems to have compatibility issues on some systems.
    The old instructions were somewhat arduous; fortunately, there is a new hidden setting for this:
    (A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (B) In the search box above the list, type or paste '''flash''' and pause while the list is filtered
    (C) Double-click the '''dom.ipc.plugins.flash.disable-protected-mode''' preference to switch its value from false to true.
    This might not take effect until all Flash has been unloaded for a few minutes, or you close Firefox.
    Before that preference was added, the way to disable protected mode was by creating or editing a settings file. The following pages/posts provide different approaches for that if it turns out to be necessary (if Flash EXE processes continue to show up in the Windows Task Manager, Processes tab, even after changing the Firefox preference):
    * Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
    * Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
    * Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternate version of Carm's batch file with a few changes by me: [https://onedrive.live.com/?cid=f7d304d92388737d&id=F7D304D92388737D!336&ithint=file,.bat&authkey=!AP2FXW2Y_3BXZyo])
    Flash needs to completely unload from memory (exiting and starting Firefox up again might help) before this takes effect.
    Any improvement?

  • What is Phantom Power?

    I'm about to buy an interface for my powerbook and I was just curious, what is Phantom Power and how will it affect my recording? thanks

    http://en.wikipedia.org/wiki/Phantom_power
    powerbook G4   Mac OS X (10.4.5)   logic pro 7.1.1,FW410 m-audio

  • My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

    When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

    Does this happen with all Wi-Fi hotspots?  A specific one?
    Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
    What about power cycling the Wi-Fi router?

  • Logic is randomly creating fades..............

    hi,
    crazy annoying problem. I notice that when I start editing audio in logic, copying and pasting, dragging audio around in the arrange window, Logic starts to create fades, even when the regions are not touching. Also, Logic will play audio that is not in the arrange window. In other words, It will play an entire audio file even though that file has been cut or shortened in the arrange window. Needless to say, I have audio playing all over the place that shouldn't be there, and fades messing up levels of audio because of the random places Logic is placing these fades. Very strange. I can work around it by creating alot of audio tracks and just moving the copied files to separate tracks, but in some cases, the extra audio will still play. The only real workaround thus far has been to delete the file that's acting strange, and re-insert it directly from my audio window. Then Logic seems to deal with it properly.
    Crazy. Any help would be MUCH APPRECIATED.
    thanks

    that's interesting. Here's an example of what I'm doing. Let's say I sang 10 leads vocals of a chorus, and then I created one "comp" of the "best of" each take. Now I have one chorus, on one track with a bunch of regions, some overlapping, but some don't overlap. Now..... if I select that entire chorus, which will include ALL of the new regions I put together, in other words, the "comp", and click/hold/and drag to another location, shouldn't that "comp" look exactly the same no matter where I put it on the arrange page? And shouldn't it sound exactly the same way? I've been using Logic for many years, left for a while because I had just bought a dual opteron [that's for another post ;)] and have been using Cubase sx, Nuendo, and sonar for the past few years. I'm thinking that one thing that has never changed in any of these programs is that U can cut audio regions, or make them smaller, and U should hear what U see on the arrange page. I'm also thinking that when U select/click/hold whatever key that particular program uses for copying/and then drag, U should be able to move that particular part that U just selected, anwhere in your arrangement. this is real basic stuff here. I'm just thinking that this is a bug, but now that I think I explained it more clearly, I'm also thinking since I haven't been here in Logic for a few years, maybe I'm doing something wrong. I spoke to tech support at Apple, and they had no clue.
    they didn't think the behavior was normal.
    anyway, lemmeno.
    thanks

  • My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this?

    My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!

    No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

  • My mac mini will randomly freeze up and my scrren will get multi-colored rectangle boxes

    my mac mini will randomly freeze up and my scrren will get multi-colored rectangle boxes all across the screen. the only option i have left to do is reboot my whole system by the power button. has anyone ever encountered this problem?

    The two most highly recomended RAM suppliers here in the ASC,
    are > OWC macsales.com and > Crucial.com

  • If I send I'm iPhone5 to get fixed will I lose everything on my phone

    I went to reset my iPhone5 because the apps weren't working properly so I held down the power and home button, but it didn't turn back on.. I need too send it in to get repaired but I don't want too lose all of my photos, contacts etc . If I send it in will I lose everything?

    Yes, Apple replaces iPhone not repair.
    You need to backup before hand.

  • If I install Leopard 10.5 will I lose my Os 9.2.2?

    Hi,
    I have a 466 Mhz Power Pc G4, 1.5 GB of SDRAM..running 10.4.11. I love it!
    1) What I am faced with is losing my OS 9.2.2 if I install Leopard 10.5..I have Dreamweaver Ultra Dev for OS 9 and I use it everyday for my websites, will I lose my Os9?
    2) I am on a fixed income (on purpose) so I know I will never buy an Intel Mac..sad but true I guess. It seems my PPC just won't go the distance with the internet, with no flash support or any new apps or software. I am still seeing flash videos on my Firefox 3.6.28 since I upgraded my Adobe flash to the highest they would offer Flash Player 10.1.102.64 , but I'm sure someday my version of Firefox will just go extinct.I'm using Adblock on Firefox to save memory and I downloaded TenForFox- My Safari is really doing well also.
    How many tweaks can I keep doing to keep up..the alternatives are quickly vanishing. Shame on Apple for doing this to us loyalists.
    Should I migrate to a Linux system? And just learn a new website editor program? like Kompozer?
    Thanks-LionInSunHeart-Arizona

    Mac OS 9.02 emulation in Snow Leopard and Lion: Sheep Shaver
    SheepShaver requires a Classic ROM and quite a bit of setup, but there is now a fully contained version, Chubby Bunny, available: Google the term "Classic-On-Intel v 4.0.1 chubby bunny"
    Here is some information on SheepShaver:
    http://www.emaculation.com/doku.php/...mac_os_x_setup
    and
    http://www.everymac.com/mac-answers/...ntel-macs.html

  • Why does my Iphone 4 keep freezing up, Apps will close with out notice, and will randomly restart?

    I just got a used Iphone, and it keeps freezing every time I try to do anything. Every time I click on an app it will open for a second and then close right back out. It will randomly restart, and some times it will just freeze and the only way I can get it to turn off is to hold the home and power button. I have done factory restarts. I restarted the phone as a new iphone and still does the same thing. I havent downloaded any apps from the app store and have just left it completly stock and it still has the same issues. Any ideas?

    If you already try to restore via iTunes I think it is an hardware problem.
    You should contact apple support and request service.
    https://expresslane.apple.com/GetproductgroupList.action

  • My computer will randomly shut down.

    Hello. I am using a 2006 model macbook pro, running 10.6.8 OS X. My Computer will randomly shut down with no prompt or closing any programs, as if someone held down the power button. When i go to the console application and look under system.log the last message i recieve before my computer shuts down is this:
    Dec  8 22:10:44 kieran-hooks-computer [0x0-0x16016].com.apple.appstore[170]: This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.
    this message is repeated over 15 times in a few seconds. I know quite a bit about computers so dont be afraid to get technical.
    please help,
                   -Kieran Hook

    I know that it only does this when I do something computer intensive. And also the fans run 6000rpm constantly from startup.

  • If I reset my iPad in order to fix my email problem, will I lose everything on it....like my books?

    If I reset my iPad to fix a email problem will I lose everything on it.....like books?

    If you reset by pressing and holding the home and power buttons for at least 10 seconds until the Apple Logo appears, you won't lose anything at all.  It's nothing more than rebooting your iPad, like rebooting your computer.

  • What will I lose with a factory reset?

    I used to love my S5 but lollipop has made me want to throw it thru a window. A fully charged battery does not last thru the night not being used (with all apps closed). The  Android OS and Android System are using the battery with a few other things using single digit percentage. It is also slow to respond and frequently get pop-ups that contacts or other things have stopped responding. It overheats and shuts down when not in use.
    I tried following the steps to clear the cache (Power, volume up, home) but it just keeps going from the screen with the white Samsung Galaxy S5 to the one with the Samsung rainbow logo then back to the white one. I tried volume down, power, home and get a screen about installing a custom OS.
    So as a last resort what will I lose if I do a factory reset and has anybody had that actually help because I have seen posts that it didn't.

    It may or may not help, but can't hurt to try.  It will reset your phone back to a factory fresh (with Lollipop) activated state.  All account information and apps you have installed will be gone.  If you are logged and synced to google prior to the reset (check in settings under accounts selected google account and make sure everything has synced successfully).  When you log back into your google account it will bring back most of your settings, apps and contacts etc.  If you have installed any apps that store local data they will be as though they were fresh installed with all data cleared.  You can also use Verizon cloud or Samsung to backup things such as contacts, messages, pictures, music.
    Your SD card will remain untouched so if you have one and pictures and music are on there they will remain.
    If you don't have an SD card make sure your pictures and music have been backed up somewhere as well.
    http://www.smartmobilephonesolutions.com/content/how-to-backup-and-reset-an-android-phone

Maybe you are looking for

  • No video with iChat

    Outgoing iChat video does NOT work, but incoming video does work.  Connection doctor says "Router type:  Port Restricted".  Router is BT  Home Hub 3. (OSX Lion 10.7.2) iMac intel Core Duo purchased October 2011.   Skype video chat works well. I would

  • How to read the last line in a text file using text_io?? please help

    Dear all I made a procedure that append text into a text file on the operating system. the text file grows rapidly. It contains now about 200,000 line . I need to read the last line only . In other wprds i need to go direct to the last line to read s

  • Are the eMac and the G4 Mac Mini similar enough to...

    use the eMac's tiger upgrade to upgrade my mini to Tiger? I know the other versions of tiger upgrades are specific to the hardware, i.e. powerbook, ibook, imac, ect. But seems to me eMac and the G4 mini are very similar. Possible? thanks ~bill

  • Can we a  condition type in PO, accepts negative value & vendor no.

    Hi freinds, i have a query, can we a  condition type in PO, where user can enter negative value and can assign a vendor against that condition type as like freight vendors in import PO. now what i have done is , i have created a condition type which

  • Query with variable and restriction

    Dear All I want obtain limited list. Example,when I use in query  set @DataFrom =  (select min(T3.TaxDate) from dbo.OJDT T3 where T3.TaxDate >= '[%2]') I can choose data from firt to last Journal Entry. What can I do when I what show data only from