Logic windows loosing "link" bug?

Hello everyone,
My Logic windows are loosing their "link" ability, and I'm wondering if its a bug. In my main screenset I have 5 windows that are used: Arrange, movie as float, global mixer, event editor, and an environment window on a 2nd monitor used for selecting instruments. In my setup, I use midi instrument tracks to trigger exs instruments, and use channel splitters to select different articulations per instrument, allowing for my instrument parts to play multiple articulations on a single track.
Now, in the course of my work I consistently switch between the event editor, global mixer, environment, and arrange page, and sometimes my "link" between the environment page and my arrange page becomes dead. i.e. I can switch between tracks in my arrange page, but it no longer switches instruments in my environment page. The only solution I've found is to click on the environment to "refresh it" and then click on my arrange page, and they are now back in sync. However, it seems that once I click on the global mixer, the environment is once again out of sync with the arrange page.
Is there anyway to fix this behavior and have the environment always be in sync with the arrange page? Is this a flaw in dual monitor operation or a bug in Logic? Note: my environment uses the "pink/purple" link where my event editor uses "golden link." All windows, except my movie and transport, are non-float.
I'm guessing this is a bug, but would like to make sure. Thanks again for your help!

I figured out what I do sometimes that causes that (maybe this is what's happening to you guys - at least some of the time?). Try this:
While the song is playing, use the scrollbar to scroll ahead to a part of the song that isn't on the screen. As soon as you scroll off-screen, the Link button goes out. The song stays where you put it, but you lose the Link.
A better behavior would be that when you release the mouse, the song snaps back to where the SPL is and keeps the Link button enabled. Alternatively, the song position could stay where you left it (with the SPL finally catching up), but keep the Link button enabled. The next time you start the song, it would snap to the SPL. The way it is just doesn't work well - at least for me.
Dual 2.5Ghz 2004; 2.5GB RAM   Mac OS X (10.4.8)  

Similar Messages

  • Logic 8 Content Link Bug?

    I have found a bug, I think, in Logic 8, as far as Content Link is concerned.
    A screenset with only a Piano Roll
    window in it, and with the link checked yellow, does not update
    when you select a different region in the Arrange page in another
    screenset.
    For instance, I have screenset #1 as an Arrange page,
    and screenset #6 as a Piano Roll only page. Selecting a midi
    region on page #1, and switching to page #6 should show the
    midi region that is selected. That is how it works in Logic 7.
    It does not work in Logic 8, however. But, if I uncheck
    the yellow link and recheck it, it updates. Also, a Piano Roll
    window follows the region selection fine if both the Arrange and Piano
    Roll window are on the same page. Can another Logic 8 user on
    a mac intel machine verify this? I've got verification on non-intel
    macs that the problem exists there too. I've tried all kinds of settings
    on the Arrange page and nothing seems to matter. Yes the Piano Roll
    at the bottom of the Arrange page will update, but I like working
    on a full screen Piano Roll, and it works fine in 7.

    Apple are aware of the issue. Hopefully it should be fixed in the next release (I'm pretty confident it will be).
    And yes, it's an annoying one...

  • Binary Data type in Logical - Is it a bug?

    Binary Data type in Logical - Is it a bug?
    Hi ,
    I am using SQL DM 3.0.0.665. I need your thoughs on following.
    I have an attribute in logical model with binary datatype. As I generate physical, SQL DM putting the column in BLOB data type. I thought binary means 1 bit ON/OFF type.
    What is the interpretation?
    Thanks in helping us out.

    I thought binary means 1 bit ON/OFF typeYou can check mapping of logical type to native database types in "Tools>Types administration". Data Modeler comes with set of predefined logical type and their purpose is to cover all native types in supported databases.
    Nothing can stop you to change predefined types if you don't like them or/and to create your own types.
    In the case of "Binary" - it's introduced to cover "binary" type in MS SQL Server - it's sequence of bytes not bits or bit.
    Philip

  • Customize The Window A Link Opens

    Hey, I've had some great success with this forum before. Fast responses, friendly people, and fantastic answers so I though I'd ask for help with something else I've struggled to get answers through googling.
    I have products on the site I'm building, and I'd like to save space on the product pages by showing medium sized thumbnails of the product, however I still want people to view larger images of the products, and so I've placed a "Larger Image" button, and I have it linking to a new window where they can view a larger image of the product. I've used target="_blank" to have it open in a new window. The link opens a whole new window though. I'd like this new browser window to open in a much smaller size, and without the address bar. Much like how this website has it set up:
    I'm lost on what I would use to customize the window my links are opening in. Any help or advice is, as always, greatly appreciated!
    - Dreamweaver Noob

    Have a look here http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=lightbox&search_exchange=3&sea rch_category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&st artnum=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    Gramps

  • When I click to open anything I get a box saying open link in new window, open link in new tab, download linked file etc.  When I go to close anything I get hide toolbar, customize toolbar.  It takes  3-5 clicks and it will finally close.

    When I click to open anything I get a box saying open link in new window, open link in new tab, download linked file etc.  When I go to close anything I get hide toolbar, customize toolbar.  It takes  3-5 clicks and it will finally close.

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I click a link but it doesn't open. Instead I get a popup saying "Open the link in a new window," "Open link in a new tab," etc. How can I kill this popup or whatever it is forever?

    I click a link but it doesn’t open. Instead I get a popup saying “Open the link in a new window,” “Open link in a new tab,” etc. How can I kill this popup or whatever it is forever?

    That happens if the server sends the file as text/plain.
    You can see this if you open "Tools > Page Info > General": Content-Type: text/plain
    Files send this way will always open in a tab.
    *https://developer.mozilla.org/Tools/Web_Console

  • File Repaired - Logic Windows error message

    Hello all,
    Have experienced this message several times recently:
    "File Repaired
    This project has formerly been converted from Logic Windows and contains 40 damaged text blocks (Markers, track names etc.) which have been repaired."
    Is this something to be worried about? I found one other locked message board thread on this error saying it is probably just a corrupted file(s). What could be corrupting the files, backup software maybe? This is 10.6 Mac pro with newest everything.
    Any insight is appreciated. Thanks

    I've never seen that message before, I've rarely used songs from a windows version. My guess is that if it says it is repaired, it probably is. The files may not be corrupted per se, but just in a format, long gone, that Logic is not expecting to see anymore. How do the marker and file names look when you open the songs?

  • I am unable to open a new window / open link in a new window

    In the previous Firefox versions we are able to open a new window & open link in a new window. The feature is there when you "right click" on the tab or click on the "open a new window" but it simply not functioning

    Link context method works for me, there have been many complaints that the first two items were switched, and that can be easily modified with the "'''Menu Editor'''" extension.
    If it does not work for you an extension might be involved.
    There is also the mouse shortcut '''Shift+click''' on the link. Called mouse shortcut because it involves the mouse.
    * Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
    You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

  • Can you package files in Premiere Pro CS6 like you do in Indesign so you don't looses links?

    Can you package files in Premiere Pro CS6 like you do in Indesign so you don't looses links?
    We are sorting out our filing system and want to be able to move files and rushes to new locations without loosing the links between them, is their a way of doing this? When using InDesign you package a file and it creates a folder of links and fonts, something like this would be useful.

    Have a look at the Project Manager.

  • Loosing Links in Premiere Pro CS4

    I copied the folders of a couple projects to a back-up drive for future use.  I didn't use the Project Manager, because I copied everything related to my project within it's own self-contained folder structure.  Since I copied everything "as is" from the original drive to the back-up I thought there would be no loss of links.  All 3 of my project now will not load, even if I copy them back to the original drive.  Note: I did recently change the drive letter to the drive the project was originally copied from.  Re-linking would be very time consuming at this point.  Why am I loosing links when the have not actually moved?

    If your files are located on the same drive (letter) and with the exact same directory structure, relinking should not be necessary. However, if the program asks for file X, relinking is easy, just point to the file searched for and the other files will be found automatically. You may need to repeat that for other directories.

  • Where is the iTunes 10.5 beta for Windows download link?

    iOS Dev Centre only shows mac link.  My iPad2 is now a brick - downloaded iTunes 10.5 beta and installed iOS5 on iPad2 via my work mac but none of my music etc is on that one so I need to restore from my home PC (Windows) can't because it needs iTunes 10.5 beta.  Please tell me I am looking in the wrong place for the Windows link...

    OK found it if anyone else was thrown by this...
    The Windows download link for iTunes 10.5 beta is not as you would expect listed next to the iTunes 10.5 beta download section it's it's on the iCloud beta for Developers download page.

  • Each time I connect my z10 to the windows PC link it says that there is a software update !!

    Each time I connect my z10 to the windows PC link it says that there is a software update !!
    After I finish the update and I disconnect my phone then I come back after minutes and connect my phone again the link says again that there is a software update !! I did that 5 7 times till now and here is the message which I see every time
    " Included in device software update 10.1.0.4181 :
          This important software update includes a number of new features designed to help keep you moving! Some of the enhancements include improvements to the BlackBerry Hub, BlackBerry World and BlackBerry Balance. Visit blogs.blackberry.com/blackberry-10-software-updates to learn more about the specific features. "
    could u help me Plz ,, is this really updates or what !!

    I am having the same issue with Link, posted my response in the Link Forum.

  • Adobe InDesign CC looses links randomly. How to correct this ?

    Hi
    InDesign CC looses links randomly. I need to update them regularly, and then they get lost again and so on. Hence my question: how to avoid that ?
    PS: I was previously working on Indesign CS4, and never had this issue.
    Thanks

    Basically, when i open the file, everything is fine.
    1 - Then, the ‘warning’ icon appears on 1 link, then 2, until all links are lost.
    2 - I then need to update these links. To do so, I select the links in the links panel, right click, and then click ‘update link’.
    3 – then, after a while, links start to get lost again, so back to 1.
    I have to mention that I don’t have these issues with all files, but with around 4-5 of them.
    Everything was working fine when I was on CS4, it just appeared when I switched to CC.
    Hoping this can help understanding…

  • Regarding creating a LOOSE LINK between Sales Order and Vehicle

    Hi,
    Does anyone has any idea on how to establish a LOOSE LINK between Sales Order and Vehicle using BAPI_VEHICLE_CREATE or any other Function module.
    Any help will be highly appreciated and rewarded.
    Kind Regards,
    Tanuja

    Dear Kumar,
    Strategy - 40
    Consumption of PIR (not Redution)
    1) the first point in strategy in 40 is, incoming sales order consumes PIR
    2 )both sales order and PIR takes place in MRP planning run
    2) this is where it is in mostly used in many indutries
    just a small example how this strategy works
    1) creat PIR for ur FERT- 100Nos
    2) check in MD04- u will get PIR (VSF) as 100
    3) now creat sales order for 120 for same month
    4 )run MRP for that particular FERT
    5) check the result in MD04, here ur PIR gets vanishied and an plan order will be generated for 120 Nos.
    Regards
    kumar
    Edited by: kumar kumar on Jul 22, 2009 8:29 AM

  • How to show "window close" link in the page.

    "window close" link is the standard link in the EBS.
    But how can I show it in the EBS page? Thanks.

    Hello Peter,
    Thanks for your reply! That maybe is one solution. I think I used wrong terms to define the problem. But what I really ment, was that how to define links directly to portlet application (through portal of course) not just to portal page. I didn't find help from the HttpPortletRendererUtil class.
    I try to explain the problem more clearly:
    I have an portlet application that have main page (jsp page). The main page contains different 'areas' that are implemented by an iframes.
    For example there is a result area (iframe) and browser area (second iframe). The user can browse the results forward and backward. When user clicks one of the browser links the results are seen in result area.
    Ok this works fine when the application is 'ordinary' (not portlet), but when this is adapted to a portal as a portlet (through web provider) and I have to define the source to iframe (I use HttpPortletRendererUtil class's helper method to define links) I have only option to define the portal page link and that's why there comes additional page banners/headers to the result 'area' of the main page.
    Hope this is better explained. But if it isn't, please be free to ask more...
    Regards, Robert

Maybe you are looking for

  • Magic Mouse continually fails to left click, and keyboard problems

    Since my Yosemite 10.10.1 update, my mouse, and keyboard keep failing periodically. After a nights sleep, when I try to open a program, by left clicking, it will occasionally only right click. Being able to left click, is very crucial, even more then

  • Oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: JBO-2500

    I created custom application in Jdeveloper and uploaded all class folder and Pages and Region For Region i created One Function and this function used in workflow attribute and that attribute used in Message and this message used in Notification when

  • Users created in SBS Console don't show in Active Directory Users & Computers

    SBS 2011 - created users in SBS Console, but they don't show in ADUC.  The newly created accounts seem to work as expected (user can login, Outlook account setup works).  Have ADUC 'Advanced Features' enabled, tried searching for a user, right-click

  • Hyperlink in mail message gets changed

    I'm having trouble mailing webpage addresses. If I copy and paste an address into an email the entire thing does not get underlined so when recipients click on it they don't get the entire address. If I use mail/edit/add hyperlink and paste the addre

  • MAC OS X Lion downloading Trouble.

    Im having trouble installing OS X Lion, my internet connection is working properly. Apple starts downloading the app, but it only gets to 10 MB/4GB, and stops and restarts download from 0. It repeats this process for 5 times. At last shows me and int