Logic with a digi interface

Hello I just bought a logic studio 8. I have a Question, I was reading that some people use a digi 002 working with logic 8, I wonder if a digi 002 or a digi 003 works sincronized with all the motorized faders, gains, knobs and the little screen?
somebody use that interfases?
Paul.

I just got an email this morning from Digidesign. They indicated that their hardware will not interface with Logic. Digi is only designed to interface with Pro Tools.
I have the same problem. I have been using Pro Tools LE with a 002 surface controller. Now I have Logic 8 and have to get a different controller. I am looking at the Mackie Universal Pro or Euphonix MC.
Good luck.

Similar Messages

Logic 8 and Digi 003 with RME-ADI-2 as DA/AD converters.

I am very new to this so, I'll do my best at explaining what I am trying to accomplish. I am running Logic 8 with a Digi 003 as my interface (connected by firewire). I just got an RME ADI-2 converter (connected to 003 via optical i/o). I have the outputs of the converter working fine to my monitors, but I can not figure out what I need to do to use the RME as a source for inputs. In Logic preferences for Audio Hardware, it does not give me the option for using the RME (only the 003).
Any help on this would be great. Thanks in advance.

Usually you'd create an aggregate device (Utilities Folder - Audio/MIDI set up) to create a new virtual device, into which you can combine two or more devices, including built-in audio I/O.
But although I'm not certain (as I don't use an 003) I don't think you can create an aggregate device with an 003 (no harm in trying, though).
As your RME is already working fine connected to the 003 via optical, presumably as the 003's outputs 9/10 (S/PDIF?), wouldn't the inputs be available also on 9/10? Doesn't the 003 support ADAT - in which case the RME's ins/outs should show up, but as part of the 003 if you cabled the RME to the 003 via the ADAT connections.
Sorry to not have a definitive answer, but maybe try some of the above variations. Maybe an 003 user will chime in.

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

Garage Band, I am using an MBOX with a digi design audio core as a mic interface to recod into Garage Band. Now when I Change the preferences to use the MBOX I can not move the recorder slider and there is no sound going into garage band? Any solutions

10.5.8 with latest garageband 5.1 with MBOX 1. On Nov 4.09 I did a software update, now i get no output volume or input volume to the computer itself. I get it from head phones from my mbox, but not to the computer. Before the software update It worked great. I've tried upgrading software through digidesign .com, but they dont seem to have one for what i need. any way to get my old garage band back? go from 5.1 to earlier? Or maybe it was the upgrade to 10.5.8. update? Can i go back in time lol?
Any help would be appreciated
BTW
Ive tried all the system sound prefs, and garage band drivers. Back and forth.
cheers
ds

Problems with USB Audio Interface

My Behringer mixing board came with a USB Interface so I can out put the audio from the board into my laptop via USB. The trick is though Logic recognizes it and I can record say microphone audio from the board on Logic, I cannot hear the tracks that already on Logic. For instance, say I want to record a vocal track onto something I have created on Logic. Logic will let me record the microphone vocal but it won't allow me to hear the track, rendering it useless. It is a very simple USB interface and I have been thinking of upgrading but I am wondering if it something I am doing wrong on Logic. Any thoughts?
Ken

when you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface.

Logic with a Saphire focusrite or Liquid Mix?

Anyone using logic with the focusrite Liquid Mix or saffire?
If so can you guys post some a and b mp3 demos
cheers

ThorTheGodOfBlunder wrote:
Yes I have experience with both. Use Saffire Pro 10 with my MBP and never had any problems with it very happy with it. Sold the Liquid Mix. If you want to use an external harddrive and a firewire interface you'll run out of firewire busses even with expresscard adapter and the saffire really doesnt like to be daisychained. And when I had the Liquid Mix, never really used is as a control surface didnt really find it better over using a mouse. And even though its takes processing load of the cpu it still caused other problems and made the system less stable. This was on Logic 8 and the drivers they had for it about 2 years ago though so dont know if its better now.
But did you like the sound of the liquid mix's DSP plug ins or not?, i am not interesting in using it as a surface board, i doubt that is what people buy it for, the built on DSP is what i am curious about,
As for the Saffire products i know the older models like the Pro 10 and Pro 26 i/os do not have any on board DSP processing like the liquid mix but Focusrite claims that the quality is alike their Green Channels, hows do or did they sound to you guys?

Anyone Using PC and Logic with hypersonic ?

by this time i should be on mac, yeah i know but my PC still works and i can still make music
but I was wondering if hpersonic supports multiple output on mac and how well does it run
because i'm thiking of upgrading to a mac and also thinking of getting hypersonic 2 upgrade
does it work with logic 7?
is there something similar to hypersonic or better?
hypersonic happens to be the backbone of all my songs
thanks

its pretty simple
there is few ways of doing this
one is the analog way :
1: connect a midi output from the mac to a midi input to the PC
2: i assume you have a pro interfaces in both mac and PC, so connect 2 or 4 or 6 channels output of the PC to the mac's audio input
3: Launch both logic and insert an instrument of your choice in any of the instrument channels ( EXS24 OR HYPERSONIC ) then select a midi channel in logic pro 7
4: Make sure what ever channel you have selected is the same channel in logic 5.5 on PC ( example, midi channel one will connect to instrument 1 with the input set to midi ch 1 )
if the input on instrument 1 is set to midi to then it wont receive the info from Midi channel 1's output of the mac unless you choose midi channel 2 just like any rewire
5: set the Instrument 1's output to what ever you want the mac to receive from
so if you set the output to 3-4 then you need to select an audio track and set the input to 3-4 to receive the lines just like logic will receive the channel outputs of reason when its been rewired
the good thing about this is you can have stereo inputs for every channels
6: start playing any key on the midi channel 1 on the Logic 7 (Mac) and it'll control the PC logic with the audio output coming in input 3-4 on any of the audio tracks you select in logic
good thing about this is you insert as much powerful plug-ins as wont because they are not in play mode, the only thing thats been triggered is the sounds from the plug-ins so therefore it does eat as much CPU as having them instrument on logic 7 on the same mac or having reason on the same computer
IMPORTANT NOTE
when bouncing, don't bounce it as off-line because its just having an external sound module, bounce it in realtime
and you change the songs to another songs, save the session on Logic 7 and logic 5.5 just like how you'll do on reason and logic 7
two is digital way :
its the same as the analog ways except the audio out put from the PC to the Mac is connect via ( SPDF )
i hope that sounds a bit simple but if you need more info i'll be glad to help you on that
stash

Stage Performance with 2408 audio interface

Stage Performance with 2408 audio interface
a)I need to set a playlist with my 80 projects in front of me, ready to play and with a minimum loading time every time I select a new song to perform.
Each of my logic project has about 30 audio instrument tracks and 10 audio instrument tracks with many plug in.
I consider buying On Stage but the software only takes 20 projects at the time.
Is it possible to program more than one on stage software in the same computer and to program my 80 Logic projects?
I don't want to learn how to use Ablaton live, now I am finally comfortable with Logic.
b)About the loading time and the computer CPU:
1) what would be the best deal to avoid the loading time between the songs: I can bounce my 50 tracks to a 4 stereo audio tracks, create a new project with these 4 audio instrument track to make faster or
2) I can just leave the project with the original tracks but even with my Mac book Pro 2.4 GHZ, the computer crashes sometime because too many effects and tracks. (2 GB ram)
Please if you have an idea, I would appreciate a lot!!
Thank you in advance.
John

An external audio interface will not make a significant difference to the CPU strain. All it might do is improve the quality of your output signal. It will also not improve (or alter) the intrinsic audio quality of a bounce, unless there are external hardware synths/modules involved.
In the best case scenario (high end interfaces) the latency might drop a few milliseconds.
If you do not record audio, you can turn off software monitoring.
I also have the Lush, it's a lovely synth, but also a CPU-hog that can pretty easily overload the one CPU-core it is processed on.
What often helps with these synths is to turn off any FX (delay, chorus reverb, etc) that are built into the synth, and use Logics plugins as inserts on the channel strip. Also, turning off FX on synths reveals the actual ("virgin") honest sound of the synth itself.

Terms of payment in sd module along with the fico interface

Explain breifly abou the terms of payment in sd module along with the fico interface?

Hi,
See the the SAP documentation of Daylimit.
For terms of payment which depend on whether or not the baseline date is
after or before the 15th of the month, you can define a two-part payment
term under the same terms of payment key. The terms of payment key is
expanded by the day limit entered here. Thus there are two entries in
which different terms can be specified.
In your case,
if rbkp-bldat is between 1st and 5th of the month, extract
data related to t052-ztagg = '05'.
If rbkp-bldat is between 6th and 20th of the month, extract
data related to t052-ztagg = '20'.
if rbkp-bldat is between 21st and end of month, extract
data related to t052-ztagg = '31'
Regards
Vinod

Problems with SOAP Adapter/Interface

Hi Experts,
we currently try and experiment with XI 3.0 Stack 09 and the SOAP adapter respectively.
We started with a simple interface (foo..., see wsdl attachment) that we want to provide by XI.
All configurations (SLD, Integration Repository, Integration Directory) should have been done accordingly as we suppose, similar to other szenarios we have already implemented.
When we send a SOAP request based on a generated wsdl to XI we get the exception at the bottom of this text, containing e.g.
com.sap.aii.messaging.srt.BubbleException: error during conversion [null "null"];
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source. Root element expected!
For sending the SOAP message we used XMLSpy.
Did someone have similar problems or can give us an working WSDL example, or some hint?
Thanks in advance,
Klaus Lukas
foo.wsdl
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:p1="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com" name="foo_out_sync">
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn://poreceive.xi.pse.siemens.com" targetNamespace="urn://poreceive.xi.pse.siemens.com">
 <xsd:element name="foo" type="foo_DT"/>
 <xsd:complexType name="foo_DT">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb241d2a011d9cd15e9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:sequence>
 <xsd:element name="item" type="xsd:string">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 fe0bb240d2a011d9acede9729ee2f568
 </xsd:appinfo>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="foo">
 <wsdl:part name="foo" element="p1:foo"/>
 </wsdl:message>
 <wsdl:portType name="foo_out_sync">
 <wsdl:operation name="foo_out_sync">
 <wsdl:input message="p1:foo"/>
 <wsdl:output message="p1:foo"/>
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="foo_out_syncBinding" type="p1:foo_out_sync">
 <soap:binding xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
 <wsdl:operation name="foo_out_sync">
 <wsdl:input>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:input>
 <wsdl:output>
 <soap:body xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" use="literal"/>
 </wsdl:output>
 </wsdl:operation>
 </wsdl:binding>
 <wsdl:service name="foo_out_syncService">
 <wsdl:port name="foo_out_syncPort" binding="p1:foo_out_syncBinding">
 <soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
 </wsdl:port>
 </wsdl:service>
</wsdl:definitions>
soap message incl. error
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>error during
conversion</faultstring>
<detail>
<s:SystemError
xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>XMLScanException</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:697)
at
com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl3.process
(ModuleLocalLocalObjectImpl3.java:103)
at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process
(ModuleProcessorBean.java:221)
at
com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process
(ModuleProcessorLocalLocalObjectImpl0.java:103)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost
(MessageServlet.java:543)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service
(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:162)
Caused by: com.sap.aii.messaging.srt.BubbleException: error during
conversion [null "null"]; nested exception caused by:
com.sap.aii.messaging.util.XMLScanException: Parsing an empty source.
Root element expected!
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:936)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.invokeOnResponse
(XMBWebServiceExtension.java:602)
at com.sap.aii.messaging.srt.ExtensionBubble.onMessage
(ExtensionBubble.java:58)
at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process
(XISOAPAdapterBean.java:576)
... 20 more
Caused by: com.sap.aii.messaging.util.XMLScanException: Parsing an
empty source. Root element expected!
at com.sap.aii.messaging.util.StreamXMLScannerImpl.open
(StreamXMLScannerImpl.java:104)
at com.sap.aii.messaging.mo.DefaultItem.setData
(DefaultItem.java:294)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.makeItemFromPayload
(XMBWebServiceExtension.java:972)
at
com.sap.aii.messaging.srt.xmb.XMBWebServiceExtension.onResponseToWS
(XMBWebServiceExtension.java:879)
... 23 more
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Hi Klaus
In your wsdl file the soap address tag (given below)
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
is to be edited as
<soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" />
because the soap address format should be like :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj

Problems with Java AQ interface migrating 9i to 10g

Hi!
I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ
First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.describe(OracleStatement.java:6439)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java:6203)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:1557)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1543)
at gpnic.messaging.LDAPMessenger.messageFromRS(Unknown Source)
We were using 9.2.0.8 JDBC and 9i and 10g databases.
We decided to go up for 10g r2 JDBC Drivers, and 10.2 AQ but started to get the following errors:
oracle.AQ.AQOracleSQLException: ORA-25216: invalid recipient, either NAME or ADDRESS must be specified
ORA-06512: на "SYS.DBMS_AQIN", line 454
ORA-06512: на line 1
 at oracle.AQ.AQOracleQueue.enqueue(AQOracleQueue.java:1267)
 at gpnic.comm.messaging.transport.AQTransportAdapter$AQDestanation.send(AQTransportAdapter.java:607)
 at gpnic.comm.messaging.transport.OutboundThread.run(OutboundThread.java:83)
I'm specifying address of an agent, but oracle says I am not.
I tried both native AQ and JMS interfaces, bot got the same error. I specify recipient the following way:
'consumer' var contains name of AQ agent and is not null
native AQ interface:
aqSess = AQDriverManager.createAQSession(db_conn);
AQQueue destQ = aqSess.getQueue(schema, queue);
dequeueOptionsOut = new AQDequeueOption();
dequeueOptionsOut.setWaitTime(AQDequeueOption.WAIT_NONE);
dequeueOptionsOut.setConsumerName(consumer);
dequeueOptionsOut.setDequeueMode(AQDequeueOption.DEQUEUE_REMOVE);
dequeueOptionsOut.setNavigationMode(AQDequeueOption.NAVIGATION_FIRST_MESSAGE);
AQMessageProperty mpOut = new AQMessageProperty();
Vector vRecpt = new Vector();
vRecpt.add(new AQAgent(consumer, null, 0));
mpOut.setRecipientList(vRecpt);
AQMessage aqMsg = null;
AQEnqueueOption eOpt = null;
//prepare message
aqMsg = destQ.createMessage();
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AQObjectPayload payload = aqMsg.getObjectPayload();
payload.setPayloadData(oraMsg);
//setting properties
aqMsg.setMessageProperty(mpOut);
//do enqueueOut
eOpt = new AQEnqueueOption();
destQ.enqueue(eOpt, aqMsg); //<- here AQOracleSQLException is thrown
JMS interface to Oracle AQ:
TopicSession session;
TopicConnection connection;
TopicPublisher publisher;
AQjmsAgent[] recipientList;
connection = AQjmsTopicConnectionFactory.createTopicConnection(db_conn);
 session = connection.createTopicSession(true, Session.CLIENT_ACKNOWLEDGE);
 connection.start();
 Topic topic = ((AQjmsSession) session).getTopic(schema, queue);
 publisher = session.createPublisher(topic);
 recipientList = new AQjmsAgent[1];
 recipientList[0] = new AQjmsAgent(consumer, null);
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AdtMessage adtMessage = ((AQjmsSession)session).createAdtMessage();
adtMessage.setAdtPayload(oraMsg);
((AQjmsTopicPublisher) publisher).publish(adtMessage, recipientList); <- here Exception is thrown
We tried the following combinations
9i DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 10g jdbc, 10g aq - exception is thrown
Can anyone help?

Duplicate post, please check Upgrade 9i to 10g

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Mainstage 2 : The poeples who buy complete version of Logic with Mainstage 2 will not have free update of Mainstage ??? This is outragous !!!

Mainstage 2 : The poeples who buy complete version of Logic with Mainstage 2 will not have free update of Mainstage ??? This is outragous !!!

I also agree that the paid update is a sham to those who bought the full boxed set of Logic. The ONLY reason I bought the boxed version of Logic was to get MainStage....I don't use anything else in that package. So ultimately, I've paid hundreds of dollars for a product that's now selling for $30 and I don't even get a free update.....sheesh!
As far as this logic goes: " MS 2.2 is a feature release" and that I "never bought that version of MainStage with the Logic Studio box": bollocks! Many consider a feature release to be more than a .1 incremental update...OSX versions excluded. With the exception of major OSX updates, I've never experienced being charged money for a .1 incremental update, and the vast majority of software developers have a policy that incremental updates are free until a new version is released i.e. v.2.5.6 to v3.0. I'm sure that's not always the case, but it's definitely the case in an overwhelming majority of cases.
Shame on Apple for this price gouge.

Can extends keyword be used with respect to interfaces?

can extends keyword be used with respect to interfaces?

srinu269 wrote:
can extends keyword be used with respect to interfaces?Yes. An interface can extend another interface:
interface A {
    public void a();
interface B extends A {
    public void b();
class X implements B {
    public void b() {
    public void a() {
}

Creating a Blog Template with Current BC interface

I created a website using Muse. I upgraded to the web commerce so that I could have the added features, blog, ecommerce, etc.
Now I'd like to add a blog (I came from word press) and upload a custom template (with a simple header and footer). This website would be www.mywebsite.com/blog. Where can I find this information? All of the online documentation refers to an old bc interface (http://kb.worldsecuresystems.com/753/bc_753.html#main_Customizing__Blog_Layouts?bc-partner). It took me two hours, I searched the deep ends of the Internet, You Tube, and through every menu in the current bc interface until I realized this. The time I saved using Muse was wiped out looking for this information.
All I want to do is add a custom template and post a few blogs. Is there documentation that explains this step-by-step with the current interface? Any help would be appreciated.

Still the same way pretty much but you can view here:
http://helpx.adobe.com/business-catalyst/using/add-blog.html
You got all this: http://forums.adobe.com/community/business_catalyst/documents
Which is on the overview page of these forums. And in there are links to 3rd party resources too.

Audio problems with an USB interface

Hi everyone, this is my first post and glad to finally do it.
I am so pleased with arch linux, it's just simply amazing. I have learnt a lot following the wikis, it's pretty simple and effective.
I managed to install and configure ssh server, samba server (surprisingly easy), usb samsung laser printer, nvidia drivers, KDE desktop (so fast in arch), fonts, cpu scaling and I'm so happy with the results and perfomance.
The only problem I ran into is about audio, I think the wiki on audio is pretty incomplete (don't get me wrong I enjoy your work).
The problem is with an USB interface line 6 toneport gx (http://line6.com/toneportgx/), I know the device is meant to be an usb guitar interface but since I don't longer play guitar I use it as soundcard. As complementary information it works with no problem on Ubuntu 10.04 (which is the distro I came from).
The interface works and it's unmuted since I dmix does not work when I try to play sounds from different sources I had to install pulseaudio. Pulseaudio works partially, the sound was improved and finally I am able to play different sources. The big problem is when high cpu load ocurrs the the audio dies and does not come back even when the cpu loads decrease.
Any help is appreciated.
Thanks.

You may want to debug pulseaudio (check their wiki to see how, involves running pulseaudio in verbose mode) to see what happens.

Logic with a digi interface

Similar Messages

Maybe you are looking for