Logic won't recognize any of my plug-ins...?

My computer wouldn't start so I had to take it to the mac store and they figured the best way to solve the problem was to archive and move to another folder. Supposedly everything seemed fine.
But now when I start Logic is doesn't recognize ANY third party plug-ins. Any project that had any of the plug-ins now shows the plug-in with a slash through it. Does mean I have to RE-upload EVERY third party plug-in including all the samples? Or are the samples accessible but I just have to set up the password again? I'm pretty basic at this setting up process. So any help would be greatly appreciated.
Message was edited by: Jacob Kresge

Make sure all 3rd party plug in components are in the HD/Library/Audio/Plug-Ins/components folder and not in the old user account or wherever.
Then run Audio-Units-Manager in Logic's preferences and check if all plugs are validated.

Similar Messages

IPod full but now won't recognize any files; how to fix without "restore"?

My iPod mini suddenly won't recognize any of my files or extensive playlists. I just uploaded several songs to it, and when I disconnected and tried to play it, it suddenly showed as completely empty, like I'd deleted everything. I plugged it back in, and while nothing shows up in iTunes with - no songs, no playlists - it says it's still nearly full.
Reading another thread, I found the files on the iPod through My Computer. So they are still there, but for whatever reason the iPod, literally suddenly, can't recognize them as present. How do I fic this WITHOUT having to restore the iPod and then re-add those files (and recreate all of my playlists?)
Please, please help!

See this.
What to do if iTunes displays a corrupt file message.
And this thread.
Da Gopha's corrupt file info.

Laptop won't recognize any ipods

OK, so I have an ipod video, a click-wheel ipod and a new shuffle, and my gateway laptop won't recognize any of them. It recognized them all until earlier this week, and the USB ports still work with my flash drive and mouse. I plugged the ipods into another computer using the same chord and they work fine. I got the ipod video replaced at an apple store, and still nothing. I plug the ipod (any of them) in and in the device manager it shows up as an unknown device. I tried reinstalling the driver, but I get nothing. I've restarted the computer of course, and have restarted the ipods (except the shuffle). I've gone through the troubleshooting on the apple support page, and am at my wits end. any suggestions?

I went through the troubleshooting page and went BACK to a genius bar and got the ipod video replaced again (they said it had a bad hard drive). I still have the same problem though. I think my computer's hard drive is going bad, but I'm not sure. The ipod is reading, but I can't copy any music over to it now ("the disc can't be copied to or read from"). Also, when I connect it to my older PC, I fill it up with music, disconnect the iPod and see that it's blank! I look in the "about" section of the ipod's settings and it shows that memory is being taken by music, and when I plug it into iTunes it shows the music being there.

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Since resetting my apple i.d., my iPad is stuck using my old i.d. Plus, it won't recognize any of my old apple i.d. passwords.

I reset my apple i.d. at the Apple Store with the help of a Genius. However, my iPad, which I didn't have with me during that visit, still insists that I use my old Apple i.d. I don't know how to change my Apple i.D. on my iPad to my new one, and it won't recognize any of my old apple i.d. passwords.

My pleasure to help If everything is good to go then I'm happy I could be of assistance if you want to mark it as resolved XD Just to let me know if this issue is wraped up If not feel free to respond and I'll try to get back to yah mate
"Fun with the Sun; Meta."

IPad (3) won't recognize any of my wifi stored password

Hi, suddenly my iPad (3) won't recognize any of my wifi stored password... I did the 'Reset Network Settings' several times but it won't change anything... I wouldn't like to hard reset... If anyone have a solution to solve this problem... Thanks!

Once you reset network settings, you must re-enter all you password.

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.

My HP laptop with windows 8 won't recognize any library with home sharing; although the other computers do.
I've tried activating and deactivating home sharing multiple times, any other reason why this is happening?
Thanks

A couple of other things you might like to try :-
- Determine whether you are able to access the internet from anywhere else on your new PC (e.g. do Windows updates download ? Can you access the Windows 8 store ? ) If the answer is no, then your problem doesn't lie with IE but with the actual wireless connection. If the answer is yes, then continue as below.
- Run IE from the desktop instead of the Start screen - probably won't make any difference, but worth a try.
- Download a decent browser like Firefox or Chrome and try that - this will show whether the problem lies just with IE or not
- As a general rule, don't do anything that PC World tell you to do, lol !
As gg30340 says, this does sound very much like it MAY be a problem with firewall settings - if you're running Norton Antivirus then I believe that will be providing the firewall service, rather than the inbuilt Windows firewall.
One thing you don't need to worry about - Windows 8 is a perfectly good OS and works just as well as Windows 7 did. I'm using it now !

DVD Studio Pro 1.5 Won't Recognize Any Video Files

Hello, everyone! I guess this might be a little prehistoric, but I really need help. I have the dinosaur, DVD Studio Pro 1.5, and for some reason it won't recognize any .m2v's, .mpeg's, or anything else. As I understand it, DVD Studio Pro 1.5 will only take MPEG-1 and MPEG-2 files, but whenever I use them, it says, "Error: Unknown File Type," in the Log.
Can someone help me? Perhaps there is a way to make it accept more than just MPEG-1 & 2?
Thanks so much!

Well, I used the requirements for Widescreen NTSC in BitVice. The requirements are given in the DVD Studio Pro 1.5 manual. However, when I went to drag the file into DVD Studio Pro 1.5, the log came up and said: ERROR: 480 is not the proper height for a PAL file.
So, I knew that it must only want PAL files.
Another problem:
To apply videos for a Motion Menu, I am supposed to click on the menu in the Graphical View, and go to "Asset" under "Picture," and select the video I want. The problem is, it won't show ANY .m2v's in the Asset drop box. It will show my Photoshop files, though. And, I'm sorry to say that those files you offered me didn't work either. (They didn't show up under the Asset drop box.)
[Thanks so much, by the way! They had NO trouble importing to DVD Studio Pro!]
Here's a picture of my computer and the missing files in the "Assets" drop box.
http://i171.photobucket.com/albums/u320/jgilbertproductions/ExampleofAssetDropBo x.jpg?t=1193959764
The "Scene Selection" Menu is selected, and the Inspector is displaying the information.
Message was edited by: Panther Mail & .Mac

I tried burning a dvd and it said that it couldn't be verified and ejected the disc. Now the computer won't recognize any disc that I try to insert - it just ejects it. Any ideas?

I tried burning a dvd and it said that it couldn't be verified and ejected the disc. Now the computer won't recognize any disc that I try to insert - it just ejects it. Any ideas?

If the machine is over 4 years old, have the PRAM battery replaced. If the machine is less than 4 years old, look at these possibilities*: http://www.macmaps.com/cdrfailure.html

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
I'm not much at decoding kernel panic logs, but this line jumps out:
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x28a79000
Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
-Doug

Hi, I have recently downloaded a trial version of Ps CC (up until then I have used Ps CS6). All my presets have migrated to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Googl

Hi, I have recently downloaded a trial version of Ps CC (I am still using Ps CS6). All my presets have migrated very nicely to the CC version from the CS6 one. However, I can't find any of the plug-ins which I have in CS6, such as Imagenomic Noiseware, Google NIK Collection, etc. in the CC version. How do I "migrate" the plug-ins to Ps CC? I would appreciate some help with this. Thanks

Plug-Ins are not Presets. You need to install Plug-in into CC just like you had to install Plug-ins into CS6.

IPhone 4 won't recognize that it is plugged in.

Hello-
I have a iPhone 4 and it's a few months old. Yesterday morning I plugged it in and it charged.. everything was fine. I went to plug it in when it was around 9% and it wouldn't recognize that it was plugged in. So I tried different chargers, different sockets, wall vs USB... Nothing did it. I tired to hard reset, but the only thing that happens when I hold down the sleep and home button is the icon that says I need to plug it in to something. An Apple won't appear and I it won't reset.
I left it plugged into the wall outlet over night; still got no where and tried everything listed above. Perhaps it is the charge port? I am not sure..Any ideas on what to do next?
Thanks!

My Macbook did the same thing. The adapter quit charging one morning. I bought a new magsafe from Apple, and after some "discussion" A new battery was also sent=Gratis.
Unfortunately, even after hours on the phone with tech support my laptop will not charge despite a new battery and a new adapter. I have of course followed to the letter all of the recommended software updates including power/management/memory/reset programming with the assistance of tech support. I reinstalled the operating system numerous times as well. My laptop won't charge since the day six months ago it suddenly failed. It was perfect until that moment. There MUST be an explanation, yes, the adapter sending grounded power perhaps, causing a .25 cent diode to fail. Sad that the circuit board was not gated for better protection from a short circuit.
Please let us know how's it going?

Itunes won't recognize my iPhone when plugged in, I have tried EVERY step from support and nothing.

Itunes will not recognize my iPhone when I plug it into the computer, I have tried every step that support says to try and nothing has worked

I tried that and iTunes and iPhoto still won't recognize the device. Any other suggestions?
Thanks.
-CoachJB54

Itunes won't recognize any of my music folders! Help!?

When I go to "File -> Add Folder To Library" And I go to my music folder, it only shows the "iTunes" folder and none of my other folders what so ever.
This is ******* me off. Can anyone help?
In the past, I've been able to go to files, add folder to library, select one or multiple files/folders and it would add all the music/cover art/whatever to my library.
Now, it won't even recognize any other folders on my computer that aren't all about itunes or my ipod.
HELP ME.
Here's a screenshot I took of my issue:
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/255494_411962065528959_1577428155_n.j pg

Hello Liquid Drizzle,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Best of luck,
Mario

IDVD won't recognize any QuickTime files...

Suddenly iDVD doesn't recognize any of the files I had created previous DVDs with, nor is it recognizing new .mov files I have created. QuickTime, FCP, and DVD Studio Pro all still recognize and use the .mov files.
Has anyone else had this problem?
I have deleted iDVD and reinstalled, but the problem persists...
Any help out there?

Okay, I got on under my troubleshooting account, in which I've never even opened any of the iLife apps, populate the iPhoto library with some images off a memory stick, ditto for iTunes, and 2 of the Quicktime Movies that won't work under my regular account.
Created a brand new iPhoto slideshow and exported it through the 'share with iDVD' option as before. At the end of the slideshow export, I got an error message from iDVD saying that there were issues with the build and the movie was not a valid one, something like "it is not a movie". But, there it is, sitting in my Movies Folder as a Quicktime Movie AND I can play it with Quicktime.
So I try to do a new iDVD. Select the Revolution Template, drag in images from the iDVD media browser Photos, drag in music from the iDVD media browser Audio. All okay. Then I do the 'add a movie' choice, and drag the Quicktime Movie into the iDVD menu as before, and as before, it cannot 'find' it. I use the 'find file' again, and there it is, right where iDVD cannot see it. I select and open it, but iDVD responds by moving that 'find' to the bottom of the list and I'm caught in a gerbil wheel of 'finding' files that are right in front of me in the Finder, but can't be seen by iDVD.
I also restored all preferences from my last Time Machine save for iDVD, iPhoto, and the Media Browser. Tried it all again. No luck.
Any ideas?

Logic won't recognize any of my plug-ins...?

Similar Messages

Maybe you are looking for