Logic wont recognize Suzuki keyboard

I have a Suzuki SP-40e keyboard and a Sanoxy USB to MIDI cable. Logic Pro X or GarageBand won't recognize. I just recently got this keyboard, and I used to have a Yamaha with that cable that both worked fine with Logic. Any solutions as to why this wouldn't be showing up?

Opinion: Quite why people buy these cheap external devices with a Mac and expect them to work perfectly... is beyond me...
As has been often said before.. it's akin to buying a $300K Ferrari and then putting $100 tires on it.. Sure they will work, kind of... but they will reduce the performance of your Ferrari to that of a $30K Kia.....
For what it is worth....
The best performing, low end priced Midi interface I have come across recently is the iConnectMidi2+ ($89 if you shop around)
https://iconnectivity.com/iConnectMIDI2plus
http://www.sonicstate.com/news/2013/11/20/sonic-touch-26-iconnect-midi-game-chan ger/
For the price, it's build quality, performance, feature set and reliability is outstanding imho....

Similar Messages

Neo4 Plat Wont recognize any keyboard!

Just put my computer together
msi neo4 plat
1 gig(2x512) pc4400 mushkin
ati x800xl
audigy2 zs
AMD 3200+ Venice
OCZ power stream 520
It boots but it gets stuck on the the "hit del to enter bios" screen. Only thing is it wont recognize any keyboard i hook up to it, usb or serial.
This is my first msi board, decided to go with it over what i usually get, asus, so far im pretty disapointed.
Is this board faulty?
HELP PLZ!

Quote from: delirious? on 16-June-05, 15:51:22
took it out and reset bios. still nothing.
This thing wont even make it past the "platinum" screen. If i reset the bios sometimes it will make it to post but it still need to get into bios and without a keyboard im sol.
really thinking about returning this thing and getting something else thats not msi.
I had about the same issue with my platinum neo4. It had the battery at 2.2V (measured) and the bios showed 1.2V for the battery.
I wasn't able to save bios settings (blank screen when I did) and returned it to the shop. They're still investigating and probably give me some feedback tomorrow. I still want the same MSI board because it ran very smooth for about a week and hope this issue will be solved somehow.

Mini wont recognize Microsoft keyboard (Wireless Entertainment Desktop 8000

Hello,
I just purchased a Mac Mini, and tried to connect a Microsoft Wireless Entertainment Desktop 8000 keyboard, one of their most advanced hardware options. The device connects to the Mac Mini via a single USB socket, and controls a wireless mouse and wireless keyboard via Bluetooth.
When I turned the Mac Mini on for the first time, it recognized the mouse, but not the keyboard. After selecting the language, I get a warning that the keyboard is not recognized, then it goes to a page asking me to hit the key next to the left Shift key. But after I hit that key, it just sits there with the message "Identifying your keyboard..."
I checked the Microsoft support site for any information about connecting the Wireless Entertainment Desktop 8000 to Mac equipment, but they don't seem to have any information on that topic. The device works fine with an older Windows XP system, without requiring any special drivers, so it should appear as a regular USB mouse & keyboard to the hardware.
Is there any way to debug the installation of this device at boot-time, before it fails at the auto-detection?
Thanks,
TI

Microsoft doesn't offer Mac support for that particular setup. Just XP and Vista support.
I knows that one might think that "Bluetooth is Bluetooth..." - But I have found that that isn't the case.
They do offer setups that are Mac-able. So does Kensington ... and others.

LE 7.2.1 wont recognize third party AUs

Im using LE 7.2.1 on a Macbook but logic wont recognize my third party AUs, just the "built in" ones.
They are in the correct folder.
Any idea how to fix it?
MB 1.83 Mac OS X (10.4.6)

If your third party plugins haven't been updated to Intel code (or Universal), they won't work on an Intel Mac. Check with the plugin vendors.
Quad G5 2.5Ghz 4.5GB 2x250G, PB 15" 1.5Ghz,80G,1.5G Mac OS X (10.4.6)

Computer wont recognize second hard drive in target disk mode

I've had trouble installing Leopard on my iMac (read this for full details: http://discussions.apple.com/thread.jspa?threadID=1196525&tstart=0)
Long story short, I tried to hook up the iMac to my computer, starting it (the iMac) up in Target Disk Mode, in order to save some files before restoring the hd, but my computer wont recognize the iMac hd when it's connected. Is there any way to save these very important files?

Because the drive might not be the only thing that isn't working, it could be your logic board or something else. Removing the drive will isolate it and allow you to see whether your data is recoverable without having to worry about what else is failing on the iMac.

MSI Gt60 0nd wont recognize USB 3.0 mass storage device (WD)

Hi all
my notebook MSI Gt60 0ND wont recognize USB 3.0 mass storage device (WD), Western digital my passport 1TB USB 3.0 \ USB 2.0Compatible.
i connect the WD my passport to the SS USB 3.0 but it wont be recognized it only gives it electricity to spin but that's it, on the other hand if i connect it to the USB2.0 it is recognized.
i installed all the drivers from MSI to this computer the Intel USB 3.0 and the Intel chipset which are the only drivers that can be related to this.
i use windows 7, even when i had windows 8 it didn't work.
i tried upgrading the Western digital my passport firmware and even got the software thought that maybe it could help but still no luck.. any one got any idea for a solution ?
Thanks in advance,
David.

Does anything else work when you plug it into your USB 3.0 port? How about a mouse? Keyboard? Another USB Flash drive?
If nothing works in that port, your USB 3.0 port or card is probably bad. RMA time.

MBP wont recognize drives after replacing SATA cable

Background: I decided to replace my existing drive with a SSD. While in the process of replacing the drive, like a morron, I picked up the drive too fast and ripped the SATA cable. Stupid, I know. So I ordered a replacement. Hooked up the replacement without any trouble, fired it up, the computer wont recognize any drives, formatted or not, SSD or HDD. So I thought "great, terrible luck, I must have gotten a bad cable." So I contacted the seller and they were kind enough to overnight me a new one. Hooked up the new one, same **** problem.
What on earth is going on here? The computer worked great before I ripped that cable, and now it's like it's just given up on reading drives all together. Is there anything I can try?
Please help! :/
(MBP is a mid 2010 if relevant)

Ok then you either have bad cables or you are not installing it correctly. Like not seating it properly on the logic board.
There is also a piece of foam on the top of the part that connects to the logic board. If you did not move that foam from the original to the replacements it could be shorting to the bootom case.

Trying to update my iphone 5s but my itunes wont recognize my device and my home screen is stuck telling me to connect to itunes. HELP!!!

Clicked on the new iphone update on my phone since i finally have time to update it, and my phone turned off and now its stuck telling me to connect to itunes. ive had it connected to itunes yet it wont recognize my device. WHAT DO I DO?!

This article explains what to do if your phone is disabled. Follow the steps carefully.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

Turn on without Home/Power Button

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all!

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all! Im using Logic 7.1 Everything was fine till I upgraded.... Now when I click to open Logic it never gets past the startupscreen, and then I get a message saying "Logic has unuexpectedly quit" and I get an option to either close it or restart it or report it to apple, whatever option I choose freezes Logic and I have to right click it in the dock to end the program because it is not responding. Any help is really appreciated! I have wirk I need to get done! (teaches me to upgrade in the middle of a project... what a rookie mistake!)

Repeat after me...
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
Especially as big an upgrade as a whole new OS!!
O.K. for starters, have you done the routine maintenance, repairing permissions, etc..?
Have you installed the Pro Application support specifically for Tiger?
Let's start there...

My macbook pro retina wont recognize my external hard drive

my macbook pro retina wont recognize my external hard drive.
i opned the hard drive in the past on my computer and used it alot.
one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
please help me!

For starters try a PRAM reset.
DALE

I updated my Apple Id and password by email and received a confirmation. However my iphone still has the old ID and wont recognize either password. I am unable to access new apps on my phone. How do I get my ID to update on my phone?

I updated my Apple Id and password by email and received a confirmation. However my iphone still has the old ID and wont recognize either. How do I update the user id on my phone? I assumed it would update when I restarted butit did not

Downlands wrote:
I cant sign out without the old password for the reduntant appleid. I cant remember that password and because the appleid doesnt exist except on my iphone no email arrives to tell me. This is a deleted appleid but I cant get rid of it on the phone. can you help please?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Computer wont recognize 10GB Ipod Gen 3 - Please Help

Alright, Im not an idiot and I read every post related to this subject. I reviewed each of the following links and did everything they told me to do:
http://docs.info.apple.com/article.html?artnum=305136
http://docs.info.apple.com/article.html?artnum=301343
http://docs.info.apple.com/article.html?artnum=61711
I recently upgraded to the newest iTunes version and now my older Ipod is no longer recognized by my computer. iTunes doesnt open, it just gives me an error message in the bottom right corner saying Unknown Device. Ive tried looking for / updating drivers, reseting, everything and nothing works. I tried every USB port on my laptop as well. Running Win XP. Can anyone offer any other suggestions on how i can fix this???
Thanks

Its been working perfectly for 4 years until last week. I have the USB/FireWire combo for hooking it up to my computer. It worked with all the older version of iTunes and now that 7.1.1 is on there, it wont recognize it at all. The computer is convinced there are no drivers for the "unknown device" and all searches performed for the missing drivers come up empty. The computer cannot see the iPod as an iPod, and none of this happened until I downloaded the most recent iTunes.

Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L

Windows Wont Recognize

I'm updating my Dads iPod for him and for the first time ever, Windows/iTunes wont recognize it.
On the iPods display screen it says do not dissconnect so its not my USB ports nor the cable. Any ideas?
BTW, this is the iPod Color U2 version thing

This http://www.copytrans.net/helpcopytrans.php#22 is an interesting iPod detection problem check-list.

Logic wont recognize Suzuki keyboard

Similar Messages

Maybe you are looking for