Logic X 10.0.2 still failing

The new Logic X update 10.0.2 still fails.

Thank you for letting us know....
Unfortunately.. we don't know what you are posting about?
10.0.2 working fine here....
So, would you care to enlighten us?

Similar Messages

Done several option for my freezing Macbook Air but still fail. Anyone can Help me?

Hi there..My MacbokAir freeze when login. Only display apple icon and spinning wheel. ok..dis some cronology why m yMBA freeze for da 2nd time.
I’m using da mobile USB broadband. My MBA shutdown coz forgot to turn on da power. Then power’s on. Log in normally but it’s become to slow/stuck somewhere. So i restart then can’t log in.
1st time i ask my friend to hav a look then he said need to format. so i fromat it to OS 10.6.7. and now da same problem repeat for the 2nd time just for a few week only. So i wanna do it myself.
I’ve done the: 1)safe mode fail(can’t enter). 2)go to disk utility(Hold C key) then repair permission stated this statement...
Warning: SUID file “System/Library/CoreService/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAge nt”has been modified and will not be repaired.
Dunno what is it and just repair the disk and i restart, still fail. And i try 3)reset da NVRAM (COMMAND OPTION P R)..also fail. Then I try 4)reset the system management controller-SMC (shift-ctrl-opt)+power key,also fail.
Can anyone here help me what to do. Coz it’s was 2nd time i’ve got da same prob. And i believe dat if i format again, then da same problem will come again.
My MBA detail: year 2009/10, 13.3 inch, 1.86GHz intel core 2 duo(6Mb shared level 2 cache), 2GB DDR3 SDRAM, 120Gb HD,got partition for window 7 (window7 working properly).
Please help me..ur help is most appreciated.TQ

Looks like you have created a nice mess.
Make an appointment with your local Apple Store or AASP while the machine is still covered by warranty and they can help bail you out.
Regarding the Repair Disk statement you received please read Disk Utility's Repair Disk Permissions messages that you can safely ignore
BTW: Please don't use slang such a coz, da, ur etc. it's not cute and makes your post more difficult to read and understand.
Roger

TS1424 Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. I

Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?

Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.

dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on...

HT201442 I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

I am got error while trying to restore,, but i just only error file with 3194. I try many step by install lastest version and fix host file, but still fail. Anybody can give me any key point to solve this problem? Thank you

Error 3194:
This device isn't eligible for the requested build
It means that Apple has stopped signing the version of iOS that you have, try downloading the latest iOS version, then try Restore again.

Adobe reader waits about 5 mins and still fail to accept pdef drop from 3rd party applications

The Adobe Reader Version 7.0 on Linux SLED 10, waits about 5 mins and still fail to accept the drop of pdf file from another application.
The drag source create a tmp file in the /tmp directory and drag target type is text_uri_list. with XDND as protocols.
Would it be possible to find out what is required to accept drop for the Adobe Reader ? and why does it takes about 5 mins to return drag fininsh events ?
Thanks

Hello,
Unfortunately, the 7.0 Reader doesn't accept drag-drop on the application window. However Reader 7.0.8 (and the upcoming Reader 8.1) does.
Regards,
Neha

Keynote export to Quicktime still fails after upgrade to iWork 09.1

After the update to iwork 9.1 the export to quicktime still fails with 'there is not enough disk space or there was a problem with the file Error - 108'
I bought a Mac for my use at home, (got a strong one with work in mind) - keynote with embedded FCP movies in some slides made one great presentation for work. Planned to deploy it to sales and our clients and develop more. but it does not run on quicktime so after 3 months the plan has taken a nose dive.
Its tough times, Keynote style presentations with live demos of our software (embedded movies) can make a difference. But it will have to run on a PC because that is what our clients and sales force have.
With export to quicktime not working and removal of export to flash i iWork 09 , there seems to be no way to deploy a Keynote presentation to a PC dominated corporate world? and I would be very interested to know if there is a way.
I have followed all the posts and even narrowed this issue in my case to hyperlinks
but none of the solutions solve the problem
The more complex the presentation in relation to embedded movies, hyperlinks etc sooner or later triggers this problem.

I'm also trying to utilize Keynote for the PC world and NEED the export to Quicktime. I also don't notice any improvement in Keynote '09. I think the workaround has to be to export the Quicktime files - which I'm now accepting will always have mismatched timings and other problems into another program for "fixing". This weekend I plan to test various. I hate to say I will have to revert to PowerPoint because it accepts audio and video files longer than 99 seconds. FYI, I just read on another post that manually clicking through your Keynote while having a screen capture program record a Quicktime may be a solution, although I'm concerned for audio/video quality. I just downloaded a free trial of Snapz Pro to see if that works today too. Let me know if you find a solution.

I just bought a IMac and i am trying to install Logic Pro 9 but it keep failing

I just bought a IMac and i am trying to install Logic Pro 9 but it keep failing, how do I get it to work?

In that case it sounds like your DVDs have a physical problem or your DVD drive has an issue reading the DVD,
I would suggest you try making DMG inages of your DVDs, save them to your Mac and try installing from the disk images instead... (Disk Utility reads the DVDs in a slightly different way that can help get around certain physical issues)
http://www.mactrast.com/2012/06/make-disk-images-installation-cds/

Forget my ipad2 login password.Try many times but still fail. How can i re-start it?

forget my ipad2 login password.Try many times but still fail. How can
i re-art it?

You will have to restore it with the last computer that you synced with in order to restore all of your data. This will tell you how to restore the iPad.
http://support.apple.com/kb/ht1414

Mail for Mac still failing!

Despite this post, on another thread, Mail is still failing in OS X
We wanted to update you on the email password pop ups issue some of you have been experiencing. Last month Yahoo completed a piece of work which involved migrating the affected mail server farms. Since this migration work was done we have completed extensive testing and no further issues with POP or IMAP have been found. As a precautionary measure the remaining mail server farms have also now been upgraded.
There may still be cases where individual customers continue to have problems, and this could be connected with the mail clients used, if you do continue to experience any issues please get in touch so we can help you. We do not believe the problems now reported are linked to any wider issues as our testing has not replicated this.
We have decided to lock this thread as the original issue has been resolved and there may be confusion with new individual issues linking to this when the issue is something different.
Big thanks to all who posted on this thread or emailed in with info to help us investigate this and progress the server migration work.
If anyone is still experiencing issues with Yahoo mail please feel free to start an individual thread with your problem and you can get help from the community, or contact the mods via link in their profile so we can investigate and resolve any outstanding individual cases.
Cheers
David
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi MAWKY,
Can you send us your details please? You can get our contact link by clicking on my username.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Logic says after launch: Inintializing CoreMIDI failed

Three weeks ago I installed Mountain Lion, Logic X 10.0.7 on my Mac Pro
Now I have a big MIDI problem.
Logic says after launch: Inintializing CoreMIDI failed.
My utility Audio-MIDI-Setup shows audio devices. But when I want to look at MIDI-window, there's nothing and the whole utility freezes immediately.
MIght the utility be destroyed (is this possible?)
Might it be that there are new or old MIDI drivers, I should de-install? (But how to de-install a driver?)

Thank you again!
Everthing works fine.
My DigiRack 002 wasn't detected anymore, but I insatlled the
"003_Family_Driver_11_1_3" from AVID.
Now everything is fine! Perfect!
Yours
Mayerbeer
Zitat von Apple Support Communities Updates <[email protected]>:
The Art Of Sound
created the discussion
"Logic says after launch: Inintializing CoreMIDI failed"
To view the discussion, visit:
https://discussions.apple.com/message/27608372?ac_cid=op123456#27608372
>

HT1848 Sync still fails after authorizing computer

I purchaed TV shows and then tried to sync them to my ipad. The shows failed to sync saying that I am not authorized on this computer. I followed the directions and authroized the computer and it says the computer is already authorized. However, the sync is still failing with the same message. Please help.

Hi even i am facing the same problem. Have u resolved your issue?? Even my PC is not getting authorized with my ipad. Please help if possible. Thanks.

TS4036 Why after buying more storage icloud backup in my iphone still fails and tells me its not enough storage?

Why after buying more storage for icloud backup in my iphone it still fails to back up and tells me its not enough storage?

Welcome to the Apple Community.
You may find parts of my tip about iCloud Storage & Backup (sizes) useful.

TM2 unable to restore Windows 7 after Windows 8 Release Preview - have restore DVDs, still fails.

Hello! I've pretty much run out of idea's on how to troubleshoot this so I'll do a summary of what I changed with the machine and then troubleshooting details further on. The particular hp touchsmart notebook I have is a TM2 1079cl, Product Number: WA812UA#ABA. I've only had it for the length of 2012, I purchased it used from another person about 1 year ago now specifically to toy with Windows 8 before it's release. As far as the hardwares actual age I can tell from the warrenty information that it was manufactured in late 2009, it states the warranty period was from January 2010 to Jan 2011.
Alright, so my history with the OS changes goes:
-> Purchased this TM2 in early 2012, ran the recovery partition to wipe it clean of the previous owners use and it ran through installation perfectly fine, then on a clean Windows 7 as if it were new. I'd also made use of a bootable Acronis True Image 2010 disk to make a hard disk image of the three other partitions for recovery (though I did not include the freshly installed windows 7 partition, figured it wouldn't matter if recovery could do it's thing right?)
-> Some days later I loaded the second of the three preview releases for Windows 8 onto it (Customer Preview build I believe).   All worked fine and it dual booted between the two without issue, afaik the only real changes it made amounted to converting the primary partition Windows 7 was installed on to an extended partition and splitting the existing Windows 7 partition equally 50/50 inside that extended partition. It had also overriden the boot manager / bootloader that was there before but again not surprised.
-> When Release Preview build came out over summer I did an update from inside windows 8 and all seemed fine still. The change between the two preview builds did develop an issue where I couldn't shut windows 8 down without a handful of error boxes poping up but I'm pretty sure that was unrelated.
-> More recently about thanksgiving time I decided to give the laptop to a family member with a archiac desktop that's got issues and general old factor that makes it not worth updating.   This person is pretty adverse to change so that whole "Win8-vs-what people are used to" thing comes into play.   I decided to wipe the TM2 clean back to the OS it shipped with.    Here's where I'm now stuck:
=> Before doing anything I made another True Image of the HDD as a just incase, glad I did.
=> Tried F11 to load the recovery partition only to find that because of the bootloader being tampered with by Windows 8 it doesn't actually go to the HP recovery partition anymore despite still being on the hard drive.
=> Grabbed the hard disk image from the beginning of the year with the recovery partition on it before windows 8 touched the machine, wiped the hdd completely clean, restored the disk image.   I could now get into HP recovery fine but....
=> I got a dialog error right off the bat saying that the recovery partition could not install and instructing me to insert disc 1 of the recovery software. Well I never made the dvd's myself with the one-time use burning feature when it worked so that's out and I had not bought the discs from HP's support site.   At this point I'm puzzled though why the recovery partition can't install despite the computer loading up into recovery just fine. For example command prompt in the Windows PE environment is functional and all files seem to be present. Maybe some verification that the recovery partition isn't pirated might have been triggered by hard disk imaging, i'm really not sure?
=> I then made used of the HDD image I'd just created before trying this and restored the other copy of the drive (Win8 tampered bootloader, Win8 release preview, win7, the inaccessible recovery partition and all).   Windows 7 and 8-RP could still boot.   Googled around a bit about the recovery partition key (F11) getting messed up by Windows 8 and came to find I only needed to set recovery as the "Active" partition to get it to start. Sure enough that got it to start but I'm running into the same issue where the actual recovery partition loads up but now refuses to begin the restore process without HP dvd's. Since I know for certain this worked months ago I guess once again since I ended up restoring that version of the recovery partition it may have also declared itself tampered with... great.
=> Contemplated what to do for a bit and then finally just ordered the DVD's from HP in December, I specifically got the recovery DVD's for my model and they did come from HP directly, not second hand from ebay or another person. Wasn't really that bad, $16, very reasonable price. Should be set right, legit OEM DVD's to use? Nope....
=> The DVD's came. Two discs for main recovery and a third for applications and drivers.   Boot off disc one and it states it's formatting the drive how it wants (good, i'm liking this so far), copies all of the contents of the three discs to the hdd and begins it's reboot and install cycle.    Reboots a handful of times, you can tell it gets well past copying the contents of any of the discs and into installing windows. You see the Windows 7 boot logo a few times and even the standard "preparing your things" background that's similar to the Windows 7 login screen. The screen definitely gets as far as installing the proper graphics driver (and others I assume at that time) as the resolution changes to native for the TM2's LCD near the end.
=> Suddenly on the 3rd or 4th (I think) reboot of installing windows it starts for a moment then says shutting down, it reboots and it's back in the windows PE environment of recovery setup again (this time coming from the hard drive, not the DVDs) and says it's failed to restore and offers to start everything over from the very beginning.
That's where I'm stuck. The Recovery Partition died on me post-Windows 8 and the offical HP recovery DVD's are failing me (and oddly they're failing me seemingly in the very last steps of windows 7 restore, well after the DVD's themselves are no longer being read from).
>> Question 1: Does the HP recovery partition "self destruct" if it gets imaged by hard drive imaging software and restored? I can confirm mine worked fine once and then dead after going through Acronis True Image. Another possibility is maybe there's some ID's or tattooing of the hard drive or specific partitions that was lost when Windows 8 put it's newer bootloader into the machine or lost from Acronis? This is still the oem hdd that came with the computer, it has not been switched out.
>> Question 2: Are there any known problems with the official Windows 7 recovery DVD's for a late 2009 TM2 1079cl? I'm also aware of the Cyberlink recovery software patch / pre-install disc and tried this with results that were no different to without it. That said my machine does have the Cyberlink version of the recovery software, I read there's something like 3 different companies software for recovery depending on time period the laptop was made and sold.
Reference: [ http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=pv-80183-1 ]
>> Question 3: Plainly put, what now? Anything else to try or do I need to go find an RTM windows 7 disc and scrounge all the driver zips together? (Very much hoping to avoid that, I'm actually pretty curious to really understand what happened here and while that'll work it would answer nothing. hehe).
Maybe related things as well: Some searches led me to believe having the WLAN switch off at the start of recovery causes driver installation to flip out (and indeed win7 seems to drop dead during the last steps of driver install) however it's not possible it would seem to turn the WLAN card "on" before this point. Switch won't bring it to enabled state anyways.   As I mentioned above the Cyberlink recovery software patch has no effect on things.   No parts have ever been changed in this machine, original hdd, wlan card, ram modules, ect.   I doubt the motherboard bios / firmware has ever been updated, machine states it's revision F.02.
I have at my disposal:
* A lot of time, actually, hense why I really want to know what happened and not use the Win7 RTM disc.
* hdd image of HP recovery before Win8 touched the machine.
* hdd image of recovery after Win8 and a kinda buggy but still bootable Win8-RP.
* The correct HP-made recovery DVD's for my laptop, ordered recently (December 2012).
* Confident enough to toy with partition editing tools should it be a suggestion, never really used much outside of gparted on linux live discs however. Considering the current state of the machine there's nothing to risk losing anymore though.
Sorry for the text wall! I like being very detailed!
This question was solved.
View Solution.

I have the tm2 and have not experience an issue with the recovery and wifi being off, but it certainly is in the realm of possibility. I just had not encountered it on my own tm2, so I subconsciously dismissed it or just didn't think of it as a result.
Thank you for sharing your solution with the community.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I am trying to skip logic a page, but my form fails to do so

In my form, the deadline to submit an abstract has passed, so I would like to skip the pages which ask for contributed talk information. Yet, in every iteration, the form fails to skip those pages. I've tried everything, and nothing works.
The only way I could hack a solution is to go to all of the different fields on those two pages, go "Show/Hide" on each field, and then hide if "any" condition was met, where the condition was a Yes/No question from before (and I hide if they said either of Yes or No).
If I were to guess, it looks like since the form has already accepted information from those fields, it refuses to skip over those fields for future submissions. But this is a problem, of course, because I don't want to write a brand new form that includes everything BUT those two pages. (And then later have to integrate the two separate databases.) The whole point of "skip logic" is for a user to "show and hide certain parts of a form", right?
This smacks of a bug, as far as I can tell.

Dear Brian,
Thanks for responding, and I appreciate the suggestion. I think I am
following exactly what you are saying, and I agree with you. The
details: the pages with the "submit abstract" fields are on pages 6 and
7. I thought I could, at the end of page 5, say, "Skip directly to
page 8". I clicked the correct button at the bottom, I said "Skip
directly to page 8", yet, the form fails to skip. I tried it on the
"Test your page", I tried it on the live form, I tried everything.
I clicked every button on the Adobe Forms website associated with the
form, and no matter what incantation I pick, I can't get pages 6 and 7
to go away.
I believe that I am correctly interpreting what Adobe advertises as
"skip directly to page", but it simply isn't working with my form in
this particular case, and for what reason I have no idea. I wanted to
submit a bug report but the only thing I could find on their website
was "Start a discussion."
Even though I can't make the entire pages go away, I managed to get the
fields to go away by that "show/hide" trick, where I am hiding the field
regardless of what the user enters previously. Clearly, though, this
isn't the right way to make pages 6 and 7 go away, and if I knew what
peculiarity about my form was rendering 6+7 inviolate, I would change
it.
I was a bit surprised, frankly, because up until now everything about
the form (and FormsCentral in general) seemed pretty slick - I was
impressed. Now, in the moment that I need these pages to go away, here
I am, hacking again.
If you'd like to see the form in action, you can find it at
http://ohiomaa.org/register/
Thanks again - I don't know that there is a solution here, and even if
there were, it's going to be too late by this Friday anyway.
Regards,
Jay
On Tue, Oct 21, 2014 at 2:30 PM, brian.filipiak <[email protected]>

Logic X 10.0.2 still failing

Similar Messages

Maybe you are looking for