Logic X doesn't Recognize Trilian

I just got Logic X and i'm able to see Spectrasonics Omnisphere as well as Stylus RMX under the AU Instruments tab but not Trilian. I've looked to see if the AU Unit was not verified but its actually not showing up at all. Logic is not even recognizing that it exist on my system. If I go to my old version of Logic I can still use Trilian but not in Logic X. I'm using an iMac running OS X 10.9 NEED HELP!!!

Hi
You probably need the latest version of Trillian from Spectrasonics. Earlier ones do not work in 64bit, which LPX needs
CCT

Similar Messages

My computer came back from apple, the computer doesn't recognize the hard drive, or let me login, what's wrong with it?

It doesn't recognize me

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

PB G4 17" doesn't recognize it is plugged in or charge battery

My Powerbook G4 17" doesn't recognize it is plugged in (battery icon doesn't show "plugged in" icon) nor will it charge battery (down to 42%!).
I live far from an Apple dealer and know no one else who has a Powerbook so I can borrow their cord.
I have:
1. Bought new power cord
2. Reset PRAM
3. Plugged into various outlets and made sure connection is good
4. Turned cord around in the port
If I reset PMU will that help? Will it erase all my files?
Any other ideas what would help?
Thanx!

When you say you bought a new power cord, do you mean power adapter? If yes, you should have power from the wall outlet to the computer. You should be able to run your Powerbook without the battery. If that doesn't work, and you have a new power adapter, which you'd assume is good, the issue is likely inside the Powerbook. You could always take your Powerbook to a local Apple store or Apple Authorized Service Provider to use a known power adapter to confirm that is not the issue (on the off chance the one you got is for some reason bad).
If you look at where you plug in the power adapter on the Powerbook, does the jack inside seem to wiggle alot? A little movement is normal, however, if it seems very loose, then you may have a DC-in card problem. They are not horribly expensive to replace (card is around $100). If that's not it, then there is a logic board issue, and you're talking taking it to your Apple store and signing up for their 'fix everything for a flat rate' which is around $350, which is less than the price of the logic board itself, if you replaced it.

USB Device Not Recognized (PC doesn't recognize th...

My PC in which i am using XP, doesn't recognize the 5800 when i connect to USB place through Cable CA-101 i read all posts but there were just similar problems later in the process and by using Vista not XP, i already tried all downloads, cable drivers, and uninstalling and installings it says in some similar topics like in http://europe.nokia.com/nokia/0,8764,81914,00.html but nothing, i some how checked the cable for any cut, but logically, it seems to be ok, as it shows the message: USB Device Not Recognized as soon as i connect it in both ends (PC and Phone), then i checked in all connecting modes like PC Suite, Mass storage, etc. and the same, reset the phone, and same again, restart pc, restart the phone, even one tip on this page that says remove the PC from the cocket and press the On/Off buton 4-5 times to remove all the electricity that remains inside the mother board, nothing changed at all. please any one who can help would do great,
I Thank all of you in advance,
Regards,

I had the same problem. Solved by e-mailing nokia technical support.
There appears to be some conflict between the PC Suite and Nokia Updater Software on Windows XP. When I only installed the Nokia Software Updater on a separate machine without installing the PC Suite, my XpressMusic 5800 was recognised first time and the firmware update progressed without a hitch when before it was impossible.
All the necessary drivers are included on the Nokia Software Updater so you don't need to install any cable drivers separately. Also, the Connectivity Cable (CA-101D) that is included in the box is all you need to connect to the PC.
If you have already installed PC Suite, use the Uninstaller Software from nokia to remove the PC Suite software and then reinstall the Nokia Software Updater program.
Download Nokia PC Suite Cleaner 3:
http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suites/how-to/nokia-pc-s...
According to tech support, if the software update succeeds, you can then install the PC suite for other features.
Hope that helps.
ps
I have assumed you've checked that your USB port on the PC is working and that you have allowed the connection to PC Suite on your Xpress5800 when the "pop-up" screen appears on the phone when you first plug in the USB cable.
In my case, I could still sync with PC Suite but could not update my firmware as Nokia Software Updater keeps saying that the Xpress5800 was not recognised.
Message Edited by maspen on 21-May-2009 03:53 AM

X240 freezes, bluescreens, doesn't recognize SSD

As the Lenovo Phone Support was not able to help me I'll try my luck here.
My newly purchased X240 (20AMS20C00) is sadly having some issues:
- 2-3 times a day the machine just freezes mid-usage. If I was watching video the problem announces itself by playing the last few seconds of audio again and again. At first the system seems to keep responding but the more buttons I click or programs I try to start, the more unresponsive it gets until its completely frozen. --> Feels like a hard drive issue to me
- Sometimes (today 3 times in a very short timespan) the laptop freezes and then shows a bluescreen "CRITICAL PROCESS DIED). Then it restarts and doesn't recognize the hard drive. Sadly I forgot the exact error message. After a few restarts it boots again.
Here's my configuration:
Windows 8.1 with all updates installed
All drivers up to date
BIOS/UEFI: GIET69WW (2.19 ) according to Lenovo Solution Center
Also, directly after purchasing the machine I replaced the internal hard drive with a Crucial M500 SSD which is running the most recent firmware.
I also did update the BIOS via System Update. Before that I didn't experience any of these problems. But as I updated it on the first day I just might not have noticed. According to the release notes of the BIOS update it was supposed to fix exactly the kind of problems I have now.
A complete system scan with the Solution Center showed everything to be ok.
What else can I do? It's very frustrating because aside from all this I am very satisfied with the laptop, but if I have to worry that it might freeze in the middle of writing an important text it's completely unusable.

I have possibly similar symptoms. I replaced the HDD in my X240 (20ALCT01WW) with a Samsung 840 Pro SSD. I use full disk encryption with Debian Jessie, but I've also run Fedora 20 and some live CDs. After a few hours of usage the filesystem will switch to read-only and dmesg will report a ton of SATA-related errors, incluing a medium error and unrecovered read errors.
[   56.082629] Sense Key : Medium Error [current] [descriptor]
[   56.082632] Descriptor sense data with sense descriptors (in hex):
[   56.082633]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   56.082639]         00 00 00 00
[   56.082641] sd 0:0:0:0: [sda]
[   56.082643] Add. Sense: Unrecovered read error - auto reallocate failed
[   56.082644] sd 0:0:0:0: [sda] CDB:
[   56.082645] Read(10): 28 00 00 00 00 00 00 00 08 00
[   56.082650] end_request: I/O error, dev sda, sector 0
[   56.082652] Buffer I/O error on device sda, logical block 0
[   56.082660] ata1: EH complete
[   56.086399] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   56.086402] ata1.00: irq_stat 0x40000008
[   56.086404] ata1.00: failed command: READ FPDMA QUEUED
[   56.086408] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
         res 41/40:08:00:00:00/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   56.086410] ata1.00: status: { DRDY ERR }
[   56.086411] ata1.00: error: { UNC }
[   56.086931] ata1.00: configured for UDMA/133
[   56.086937] sd 0:0:0:0: [sda] Unhandled sense code
[   56.086939] sd 0:0:0:0: [sda]
[   56.086940] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   56.086941] sd 0:0:0:0: [sda]
[   56.086942] Sense Key : Medium Error [current] [descriptor]
[   56.086945] Descriptor sense data with sense descriptors (in hex):
[   56.086946]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[   56.086952]         00 00 00 00
[   56.086954] sd 0:0:0:0: [sda]
[   56.086956] Add. Sense: Unrecovered read error - auto reallocate failed
This would necesssitate powering the computer off and on. After about three times my SSD got corrupted in some way, and was completely unreadable by the laptop, including in Fedora and some other Linux Live CDs.
I figured it was a problem with the drive, so I submitted a warranty claim to Amazon and replaced it. After three hours of usage the same symptoms reappeared. I put the SSD in another computer and the partition table was corrupt, but the drive could be accessed (more than the X240 could do after the error manifested).
I believe this is a problem with the SATA controller or some other low-level hardware on the X240 (perhaps the CPU's hardware encryption module, as I was doing FDE?). I find it very unlikely that two SSDs failed with only a few hours of usage.

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0013AC2C0E8DEF50
Current user is an administrator.
The current local date and time is 2012-06-12 20:13:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address:             192.168.1.3
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Tue Jun 12 19:48:36 2012
Lease Expires:       Wed Jun 13 07:48:36 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Well, you do not mention what computer OS you are using, so here are the support documents for both.
Windows:     http://support.apple.com/kb/TS1538
OS X:     http://support.apple.com/kb/TS1591

ITunes doesn't recognize either of my iPods

I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

Hi Tanskalinen,
If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!

Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

This Question is at least 2.5 years old. But still an issue. I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Logic X doesn't Recognize Trilian

Similar Messages

Maybe you are looking for