Logic X - Plugins go missing in the middle of a session?

After a 10-15 minutes of producing music in Logic X, I go to put a reverb or delay on a track and get an . It says missing plugin, but I just used that same one on the track before!! Then 30 seconds later it works again! Losing $. Is there a fix coming down the pipeline for this??

I had the same problem and fixed it using a solution from this thread.
I just upgraded to Logic Pro X 10.1 and Mainstage 3.1
So the solution from earlier worked for me:
    just got off the phone with Apple Support!!
    I had to "repair disk permissions" in my disk utility. Then, in my User-Library-Preferences, he had me delete "com.apple.logic10.plist".
-- and for good measure I deleted all of the files in my user/library/preferences folder which were named com.apple.logic10.*
   I relaunched Logic X and it seems to be working.

Similar Messages

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

Firefox keeps shutting down in the middle of my sessions. Why?

Firefox keeps shutting down in the middle of my sessions. This is very annoying. What is the fix?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Garageband sounds goes missing in the middle of the project

in the middle of my projects I get a "file not found result error = -43" when I click on garageband sounds. I copied the sampler instrument folder from garageband and placed it in the sampler instruments folder in logic. But they still load up and in the middle of the project go missing again. I use redmatica's exs manager and re-linked to that folder and still the same results. any idea what is happening here?

Could be that something is too short to fit somewhere, but if it's happening all the time it's probably house keeping time.
Trash the FCE preferences, repair the permissions and re-boot.
Al

My help file disappeared in the middle of a session

closed help window in the middle of an iPhoto session. when I reopened it the window was blank. relaunching iPhoto didn't fix problem. any ideas?

Have you tried a Reset... you will not lose any Data or Settings...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also on the iPod, goto Settings > Safari > and Clear the History Cookies Cache.

Premiere Pro CS5 - Peak files regenerating in the middle of edit session...

Peak files generate at the beginning of edit session as expected. Then unexpectedly get peak files generating during the edit session. I notice the file names for the peak files generating are the same files that were loaded upon opening the edit session.
What are the potential causes of this?
Intermittent drive failure?? Premiere Pro issue??
Thanks.
Hugh

It happens somtimes for some people. I don't think a finite cause is known at this time. The general recommendation is to use only internal drives, no network storage and no externals.

Why am I not able to type in new URLs in the location bar either in my current tab or any new tab in the middle of my session? I've never had this problem with any other version of Firefox.

For example, I had several tabs open in Firefox 4 just now. For no apparent reason, when I opened a fifth tab, I couldn't click on the location bar or type anything into it even with repeated attempts. I either have to start Firefox again or try going back to a tab that is already open with a page loaded and type into the location bar there. That worked for me to be able to get to this website. This is very frustrating and seriously hampering my ability to use Firefox--which I have previously always been impressed with. I have a 2 year old Dell Optiplex 755 running Windows Vista.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

In the middle of a session foxfire comes up not responding a lot of the time if i am on the same page 5 minutes or more then i have trouble with get out [end now] some times i have to cut computer off manually please help this is annoying

it does this when i stay on the page 5 minutes or and try to scroll up or down it shows 'not responding' then the boxs comes up with 'end now' or cancel'[return to windows to check on program] then it want let me end now display at program not responding at down i have to turn off manually this is windows xp compaq presario 2002 year model telphone hi speed internet provider google is search engine

I personally like to Crop, and then use PNG for my screen-caps. If I need more images, say to show other Palettes, etc., then I do one each for those shots.
We see a lot of full-screen caps posted, where aggressive JPEG is used, and nothing can be read. That is especially true with images, like Adobe Encore's Flow-chart, where there is a lot of text and linking being shown.
Just my personal preferences.
Hunt

Ipod Disconnects In the Middle of Uploading Session!!!

when i upload anything (songs, photos, movies) the ipod will upload them halfway, or three fourths of the way and then disconnect. the icon from itunes disappears, as well as the do not disconnect sign on the ipod. what do i do, to complete the upload? Help, please =(

you assume correctly, but what does that matter? is
it really relevent?
I asked because it does matter. Microsoft has had an issue with their USB drivers since day one. There is even a list of devices that may suddenly be ignored by the OS (they admit to an I/O issue). You might try and unload your USB drivers and let Windows reinstall them on a reboot. Check on the MS Technet site for intermittent USB issues. I wouldn't rule out a USB issue yet.
On the other hand, if others are experiencing a similar issue, it may be your Ipod. I hope you can resolve it.

Not sure what just happened...everything just slowed/choppy in the middle of my session

I was working on a project and all of a sudden everything with in PS got noteably slow and choppy. This first happened while using the selection tool (polygonal lasso), which was lagging behind and making late clicks. I finished my selection and noticed the cursor in general was slow choppy still. I saved my work, shutdown PS, then reboot my computer. I reopen my project, the cursor lag seemed to be gone but the brush tool was not working correctly. Instead of making smooth burst of color with one click (gradient like), it now looks like 256 4 bit (old nintendo style) bursts. Or you could say it looks like multiple rings getting smaller and darker, like counting the rings of a tree trunk.
This happens instantly after opening a file of any type and size. I work with CMYK and 300dpi and while working on a page, this just happened out of nowhere.
I have an ASUS G74SX, i7 CPU, GeForce 560M w/2 gig RAM, 8 gig of SDRAM, 3 each SSD 300gigs (this is basically a 6 month old gaming laptop and has been working fine with PS until now). I have my PS scratch disk set to my F drive for all art and there is nothing more than 2 gigs of space being used right now. My RAM used in PS prefs was maxed at 5205k as suggested by the program.
I would post a picture but this forum will not allow a big enough image to show exactly what I am describing.
PS CS6 is fully up to date as well as all drivers for my GPU and the rest of my laptop.
Thanks
Josh

I personally like to Crop, and then use PNG for my screen-caps. If I need more images, say to show other Palettes, etc., then I do one each for those shots.
We see a lot of full-screen caps posted, where aggressive JPEG is used, and nothing can be read. That is especially true with images, like Adobe Encore's Flow-chart, where there is a lot of text and linking being shown.
Just my personal preferences.
Hunt

How do you change tempo in the middle of a session?

Does anyone know how to do this? please explain in detail

A few options.
1 - search the manual. It's explained in pretty good detail. Look for "tempo map"
2 - open Global Tracks and go to the tempo track. There you can click to create new tempo 'events' and drag them up and down for faster/slower etc. Clicking on the points where the tempo changes abruptly, and you can turn it into an adjustable curve.
3 - open the 'lists' window and you'll see a tempo list. You can enter in tempo events there to make precise adjustments, ie. "at bar 5.1.1.1. tempo switches to 125.4 bpm" etc.
4 - check the manual again. Read up on 'beat mapping' and other tempo related chapters.
WARNING: Some tempo operations in L8 are buggy or unpredictable. Don't mess around on your current project until you've saved a safety copy somewhere. Better yet, save a new copy of your project as "MySong_TempoTest" and then play around to your heart's content, knowing you have an un-messed up version of your tune you can always go back to if trouble rears its head.
rok on.

On a websit and a new search page pops up in the middle of my session

for example, I'm on facebook and a new search window pops up in so I have to push the back button to go back to the page I was on. It started about 3 days ago and it does it like every half hour.

Gee, I guess I have another problem. I clicked to upload a screen shot of less than 200K and the spinning wheel upload progress indicator appeared to be stuck. I tried a second time but it still just continued to spin so there's no screen shot available. Sorry.

Why does Safari keep (on my iPod) keep quitting in the middle of a session?

A lot of times when I'm on my iPod, on Safari, the session quits! Has this ever happened to any one else????
MY IPOD:
4th Generation
NOT jailbroken
iOS 5.0.1
User of iCloud

Have you tried a Reset... you will not lose any Data or Settings...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also on the iPod, goto Settings > Safari > and Clear the History Cookies Cache.

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Hi all,
My imac (osx 10.6.8), apple mail(4.5) has begun to act very odd. It quits out and on occasion I open an email to face "plugin is missing" or I have a spinning wheel and the email won't open. New to do list fails to add to the list. Can anyone help?

Logic X - Plugins go missing in the middle of a session?

Similar Messages

Maybe you are looking for