Logical AND gate getting falied

All,
We have a Process chain having AND process and below the AND process we have 4 to 5 infopacks.The problem we are facing is the AND gate got failed today stating that one of the infopack is not is the scheduled status. So after analysing the issue, we came to know that we have 2 infopackes which are not in the scheduled status apart from others are in the scheduled status. The interesting point here is the whole chain is in the Scheduled status but some how 2 infopacks are not in the scheduled status. Could any body throw light on this what might be the issue reg this...is there any patch we have update for this?
Thanks...for valid answer points will be given for sure.

try to remove the chain from sschedule and shedule it again.
if this dosn't work then activate the chain again and do merge active version and schedule it again.
hope this will help
regards
santosh

Similar Messages

Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

I am trying to stop encryption in fire vault, but I keep getting the message, The target disk isn't eligible for reversion because it wasn't created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨

I am trying to cease encryption in fire vault, Mac os x lion 10.7 4
I keep getting the message,
¨The target disk isn’t eligible for reversion because it wasn’t created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨
Please can someone advise the way to disable?
Thank you.

Are you using Boot Camp? See this discussion at MacRumors.
Clinton

How to get a column by applying logical AND operator on two column ?

All column are VARCHAR2 data type.
I have table output in this way :
col1 col2
True True
True False
False FalseBut i want a additional column in this way :
col1 col2 result
True True True
True False False
False False FalseAs the output indicates its clear that resut column is logical AND operator
on col1 and col2. How to achieve this ?

try this
WITH logic AS
     (SELECT 'TRUE' col1, 'TRUE' col2
        FROM DUAL
      UNION ALL
      SELECT 'TRUE' col1, 'FALSE' col2
        FROM DUAL
      UNION ALL
      SELECT 'FALSE' col1, 'TRUE' col2
        FROM DUAL
      UNION ALL
      SELECT 'FALSE' col1, 'FALSE' col2
        FROM DUAL)
SELECT col1, col2,
       CASE
          WHEN 'FALSE' IN (col1, col2)
             THEN 'FALSE'
          ELSE 'TRUE'
       END AS log_and,
       CASE
          WHEN 'TRUE' IN (col1, col2)
             THEN 'TRUE'
          WHEN 'FALSE' IN (col1, col2)
             THEN 'FALSE'
       END AS log_or
FROM logic
Explain complete.
PLAN_TABLE_OUTPUT
| Id | Operation        | Name | Rows | Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT |      |     4 |    32 |     8   (0)|
|   1 | VIEW            |      |     4 |    32 |     8   (0)|
|   2 |   UNION-ALL      |      |       |       |            |
|   3 |    FAST DUAL     |      |     1 |       |     2   (0)|
|   4 |    FAST DUAL     |      |     1 |       |     2   (0)|
|   5 |    FAST DUAL     |      |     1 |       |     2   (0)|
|   6 |    FAST DUAL     |      |     1 |       |     2   (0)|
Note
   - 'PLAN_TABLE' is old version
16 rows selected.regards,
friend

How do I properly setup pin and gate swap groups on new components?

Hi,
I've looked for some documentation explaining exactly how the pin and gate swap functionality works but I have not been successful.
I am trying to get pin and gate swapping working correctly on some digital logic components that I have created (side question - why no modern 74 series logic components like LVC?) as well as RPACKS and some connectors.
Is it a requirement to create a multi-section symbol to enable gate swapping? I can't seem to get it to work unless the symbol has multiple sections. It doesn't work by default for the RPACKs included in Multisim. If it's possible to do gate swapping by putting the pins of each gate in their own gate swap group I would really like to understand what I'm doing wrong.
In the Component Properties 'Footprint' tab you can define the 'Pin swap group' and 'Gate swap group' settings. I have not seen any documentation explaining this and frankly, I'm quite confused by it when using existing 74 series parts as examples. The single section symbols don't have any pin swap or gate swap groups defined and the multisection symbols have only one gate swap group and then put all inputs in one pin swap group and all outputs in another pin swap group.
I would really appreciate it if someone could point me to documentation that explains how to do this. The help files are quite poor in my opinion - they seem to only be able to point out the obvious. The 'Getting Started,' 'Fundamentals,' etc. type guides don't mention this stuff at all. The 'User Guide/Manual' (both of which appear to be outdated?) do not explain this and frankly don't have very much information about pin and gate swapping at all.
I'm hoping I'm just missing something obvious.
On a related note - I'm having some trouble working with some of these multisection components. When I want to change the footprint or update the component after making a change to the component in the database I can't seem to find a quick way to do this. It seems that I always have to go through a drawn out process of 'Replacing' each individual symbol section. Is there a faster way to do this?
Thanks,
Kleven

Hi Pat,
I'm working with some SAMTEC connectors. I don't expect you guys to have these built by default in the library - they are somewhat custom. But just so you can consider it, we are using the TFM and T2M family of connectors and I'm adding them as additional footprints for the standard dual row headers. I'm having some trouble with the footprint for the TFM screw-down option since it is a very odd footprint, but I'm going to start a seperate thread discussion for that since I really just need to understand how to manipulate Ultiboard to get the desired result and it's really a different discussion.
As for RPACKs, I'm a little confused about how Multisim currently supports these. The Value tab in the properties dialog only lets you set the resistance. Why isn't this more like the resistor value tab? Since the Value tab is modified like a virtual component it's disappointing that it doesn't offer more capability like the other virtual passives. In my limited experience I've seen the isolated-4 resistor pack used the most, but like I said, that is limited experience. It would be nice if some surface mount footprints were added to the master database for RPACKs in the future. 4x0402, 4x0603, and 4x0805, concave and convex, seem like pretty common footprints as best I can tell.
Virtual components work great in a purely physical design because you can easily change the footprint in the 'Value' property tab. With the provided RPACKs and LEDs you can't do that, so I had to create new components in the User/Corporate database. Of course, the LED can't be copied so I had to create it from scratch. But the RPACK could be copied even though it had a modified Value tab, implying it is a virtual component, if I understand correctly. Maybe these distinctions and limitations are well defined but I found it somewhat confusing that there were several common parts I had to either copy and modify or build from scratch.
Since I created those parts, we updated to the PowerPro version and though I'm not certain, I think I can change the footprint in the spreadsheet view. But in the standard version, I didn't see a way to change the footprint without replacing the component.
Also, it seems like changing the footprint does not behave quite like I would expect. If I have a database part which has multiple footprints mapped already, I would expect to be able to choose between those footprints already supported by the database part when I try to change the footprint using the Properties->Value tab or the spreadsheet view. If I need to change to a footprint that currently is not associated with the component in the database, I would expect to have to edit the database part, add the footprint, map the pins, re-save the component, then update the component in the schematic.
Is my thought process making too many assumptions here? I understand that I am one person creating one design in one specific way. So I'm sure I'm missing some usage cases or intended uses of the tool, especially since I haven't taken any training for this software and have tried to teach myself how to use it over the last 9 months. And I have noticed that even for virtual resistors and capacitors, the footprint selection dialog is the same - a selection from the database and setting up a new pin mapping.
As for 74 series parts, seeing the LVC family would be very nice. This is 3.3V-2.5V and seems like the next logical step for lower voltage support. It would also be nice to see some surface mount footprints with the 74 series parts. This isn't a big deal though - it didn't take me long to create the parts I needed by copying and editing from the Master database. And since I'm not using the simulation models, that made it even easier. Since I haven't looked into the models at all, I don't know if that would have taken longer to convert to the LVC family.
I've probably rambled enough for now.
Thanks!
Kleven

Logical AND not working in the forum search box

Logical AND of search terms does not seem to be working in the MSDN forum search box. Example: I go to the Project Customization and Program forum and type the word
subproject
in the search box. I get a lot of hits. So now I try to reduce the number of hits by typing
subproject AND read
Surprisingly, I now get MORE hits than before. The same thing happens if I enter
subproject & read
Do the MSDN forums not support the standard logical AND combinations of search terms? If they do support these combinations, what is the syntax?
Jim
...Jim Black

Cheers, you're welcome.
There's a thread going in the Suggestions forum with plenty more requests for updates to the search tool. You may want to add your voice there too:
http://social.technet.microsoft.com/Forums/en-US/9cf8ad4b-5111-4f84-9809-99cd8f1b7152/make-the-forum-search-tool-useful?forum=suggest
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Logical and physical clear in ASO

Hi There,
I found one statement for Logical and physical clear in essbase dbag
The process for logically clearing data completes in a length of time that is proportional to
the size of the data being cleared.
The process for physically clearing data completes in a length of time proportional to the
size of the input data, not to the size of the data being cleared
What does size of the input data actually means? How it is different from data being cleared.
Thanks.

What is interesting with these statements is based on them, you would think a logical clear would be slower than a physical clear. In reality, it is vastly faster. I took a 30 minute physical clear down to about 40 seconds with a logical clear. Logical clers create offsetting entries from the main cube in a slice to produce a result whila a physical clear deletes the actual data. The one thing about logical clears is rather than have #missing for cleared intersections you get zeros

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Difference between logical and virtual terms

Hello,
This is not purely oracle question; but in documentation so many times we find 2 terms:
A. Logical
B.Virtual.
So what is the principle difference between logical and virtual? As I know physical is that which I can see and touch; while logical/virtual is that is imaginary. We say tablespace is logical not virtual; while Java Virtual Machine; not Java Logical Machine. So I want to know; what is the principle difference; why two words for an imaginary thing. Before posting question; I searched in google as “Difference between virtual and logical” but I couldn’t found the answer.
Please quote your comments.
Thanks & Kind Regards
Girish Sharma

Girish,
I wont say that I am correcting you as this is like that half glass full/empty thing.May be what I see is half empty , you would see the same as half full.
Well now coming to the explanation.I am saying honestly , I got more confused after reading your definitions.What do you mean by saing that tablespace is not virtual.I see it as purely virtual.We don't say it as virtual tablespace or logical tablespace but it is actualy logical/virtual, having no existance but just the definition right?
How can you say that the size of virtual is larger than logcial?The size of tablespace is actualy the sum total of size of datafiles.So it actualy becomes very larger right?Much larger than JVM which is of few megs only.
The point 3 totally knocked me out.I have no idea what you said.
Ok I tell you this.Just remember the definition that Hans gave already.If you ask me than its the best definition that we can have. Just remember this and if some one asks you more further than give them your point 3 definition and tell them understand this ;-).Please don'tmind I am just kidding. Its just semantics.Don't get lost into it.You will find many people using both the terms interchangibly. So its ok.I shall stick with Hans's defintion,simple and concise.There are lot more other topics to dig upon in oracle.I can mail you lots of them.Spend time on those.Don't think that I am demotivating you.I understand you asked only because you have a doubt.But we got a good resolution of it and beyond that, its not of much use to dig it atleast not in the technial terms.
Cheers
Aman....
PS:Are you on oraclecommunity.net?

Combining logical and physical elements in reports.

It would be nice to be able to define in a more granular basis what I am able to include in a report.
for example.
I use the logical capabilities of the model as a more readable view of the physical, the physical always have table and column name limitations.
Also I notice that most people just want to be able to see basic informaiton. for example:
Table Name<logical>
Table Name <Physical>
Definition
Column Name (logical), Column Name Physical, data type(physical), PK Flag, FK Flag, NULL Flag, Definition.
That is it.
We can always create a more comprehensive report as the one that already exists in the product.
If I was able to get a link to the parent table that owns the FK even better.
Thanks

We can always create a more comprehensive report as the one that already exists in the product.We bet on that and this is the reason we export meta data to reporting repository - you know better your needs and can produce better report.
DMRS_MAPPINGS table holds mappings between objects in logical and relational models. You can find some diagrams in reports directory.
Philip

Can I check whole DB for logical and physical consistency?

Assume I get somehow the impression that a part of a DB is somehow corrupted.
E.g. due to hard disc sector errors or logical reference errors/changed foreign key values.
How can I tell Oracle DB to check itself resp. to verify all the content inside for logical and physical integrity?
Peter

Use DBVerify to check corruption in the datafiles.
Asif Momen
http://momendba.blogspot.com

Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
anyone else getting this problem?

The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
and promise date in that form for all the order lines or for some perticular lines in that order.
For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
Thanks and Regards,
Ragni Gupta
Edited by: 921176 on Jan 21, 2013 5:17 AM

When I click on Firefox, it seems to connect to every website I have bookmarked and I get about ten of one site in a row running across the lower screen. It also goes back to things I have closed out when I am trying to go somewhere else.

Across the top of the screen are multiples of sites I have recently visited. The computer seems to want to get all of them going before it will let me ask for what I actually want. It also says I need cookies for my school e-mail. I have to shut down about twenty sites each time I want to close off the computer.

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Template UI Logic and backingbean

Hi,
I'm new to adf and i'm trying to build a sample project with jDevelopper 11.1.2.1.0 for my company to know if we can switch to it.
I've go a use case to implement but i've got some issues to understand how i can do it.
I must create a view with :
1) a top zone with a toolbar (and other stuff)
2) a center zone with a panel tabbed
2.a) In the first tab, a bounded table with some columns
2.b) In the second tab a splitter
2.b.i ) In the first facet of the splitter a second bounded table with some other columns (but linked to the same iterator)
2.b.ii) In the second facet of the splitter a form (to edit the data)
3) a bottom zone with a statut toolbar.
I've created my toolbar with a declarative component following the adf corner [079. Strategy for implementing global buttons in a page template|http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf], my toolbar have 5 buttons (create, edit, save, cancel and delete).
I then created a template for placing panel, and table splitter ui components with a backingbean used for binding the ui components (in backingbean scope, its' important cause the template could be on the same page with nested template tag)
I've created a taskflow following the adf corner [007.How to cancel an edit form, undoing changes with ADFm savepoints|http://www.oracle.com/technetwork/developer-tools/adf/learnmore/007-cancelform-savepoint-169126.pdf] for the edit form
I created a page that inherits my template, placed the declarative component toolbar at the top, placed the two bounded datatable in the facets of the template, and finally created a normal region calling the taskflow.
When i click on the create button, the template backing bean receive the "event" and handle it, changing a task flow parameter.... (updating the region)
My taskflow update and show me the create form... no problem....
But if the user is on the first tab, he sees nothing. So i would like to change the disclosed property of the showDetailItems of the panelTabbed.
I then created a variable in the pageDef of the template that would store a boolean value if the page is in EditMode or not. (create and edit is edit mode. save, cancel and delete is not)
I created a contextual event to listen when that variable change, like that a datacontrol from a bean with a single public method could handle that change :
onIsEditModeChanged(boolean newValue){
getGUI().swicthShowDetailItem(newValue);
}The method try to get the backingbean of the template (with a el expression), and then call a updatePanel(Boolean newValue) for changing the disclosed property of the showDetailItems :
public BackingBeanTemplate001 getGUI()
FacesContext context = FacesContext.getCurrentInstance();
ELContext eLContext = context.getELContext();
ExpressionFactory expressionFactory = context.getApplication().getExpressionFactory();
ValueExpression createValueExpression =
expressionFactory.createValueExpression(eLContext, "#{backingBeanScope.backingBeanTemplate001}", BackingBeanTemplate001.class);
return (BackingBeanTemplate001)createValueExpression.getValue(eLContext);
public void swicthShowDetailItem(Boolean newValue) {
if (newValue) {
  if(!showDetail2.isDisclosed()){
   showDetaill1.setDisclosed(false);
   showDetaill2.setDisclosed(true);
}Here's my issue :
When the onIsEditModeChanged method is called the backingbean of the template doesn't exist in the context.
So adf create a new instance of it but doesn't fill the ui component references of the page so i can't change the properties cause i get a NPE.
of course showDetail2 and showDetail1 have their binding property set :
<af:showDetailItem text="showDetail1" id="pt_sdi1" stretchChildren="first" binding="#{backingBeanScope.backingBeanTemplate001.showDetail1}">
And
<af:showDetailItem text="showDetail2" id="pt_sdi1" stretchChildren="first" binding="#{backingBeanScope.backingBeanTemplate001.showDetail2}">the backingBeanScope.backingBeanTemplate001 is referenced in adfc-config.xml :
<managed-bean id="__5">
    <managed-bean-name>backingBeanTemplate001</managed-bean-name>
    <managed-bean-class>org.darkink.test.backingbean.template.BackingBeanTemplate001</managed-bean-class>
    <managed-bean-scope>backingBean</managed-bean-scope>
</managed-bean>If i put a button IN the template that change my attribut value :
public void switchAction(ActionEvent actionEvent) {
        BindingContext bindingContext = BindingContext.getCurrent();
        DCBindingContainer bindingContainer = (DCBindingContainer)bindingContext.getCurrentBindingsEntry();
        AttributeBinding binding = (AttributeBinding)bindingContainer.getControlBinding("isEditModeAttr");
        binding.setInputValue(true);
}I dont have the NPE, at the "JSF Invoke Application" the bean already exists in the context (it is created at the "JSF Restore View") and all the ui component are NOT null.
BUT if a place my button in the page that inherits the template and i call that method :
public void switchAction(ActionEvent actionEvent) {
        BindingContext bindingContext = BindingContext.getCurrent();
        DCBindingContainer bindingContainer = (DCBindingContainer)bindingContext.getCurrentBindingsEntry();
        DCBindingContainer bcPtb1 = (DCBindingContainer)bindingContainer.get("ptb1");
        AttributeBinding binding = (AttributeBinding)bcPtb1 .getControlBinding("isEditModeAttr");
        binding.setInputValue(true);
}everything works the same BUT at the "JSF Invoke Application" the bean doesn't exist in the context (so adf create it, BUT doesn't fill the ui component bindings).
The strange thing is that at the "JSF Restore View" the backingbean is well created and filled with the ref of the ui components....
So here's my questions :
1) Why there is a difference when my button is on the template and when it's on the page ??? (with the backingbean)
2) Why the backingbean is not fully created (only the constructor is called and not the ui components bindings)
3) How can i realise my use case ?
4) Is there another method to implement UI Logic with template ?
5) Is there a better way to do this ?
6) How to get the context of the template ?
Thanks a lot for all of you who had the patience to read all of this, i know it's a lot
but i didn't know how to explain my problem without all thoses explanations.
I've read all the adf corner and all the given pdf books on the site (that i've found) trying to search for a solution and
didn't find one. So please don't tell me read the books, or the solution is already documented...
It would be a lot more helpfull to explain me why it's not working or why what a did is not a good solution.
Sorry for my poor english too.
Thanks a lot....
Angle
P.S 1:
In the swicthShowDetailItem method i've tried to change for using this :
if (newValue) {
RichShowDetailItem c = (RichShowDetailItem)getComponent("pt1:pt_pt1:pt_sdi2");
if (!c.isDisclosed()) {
  ((RichShowDetailItem)getComponent("pt1:pt_pt1:pt_sdi1")).setDisclosed(false);
  c.setDisclosed(true);
}It's working... but ugly and not efficient... so for me it's not a good answer....
P.S 2:
Another solution that i've found is that i could create an hidden button on the template
that call the change event and in the page create a button that queue a click event
on that button but for me it's not a solution.
P.S 3:
I dont like a JavaScript solution neither. for me, if a can bind my ui components to a backingbean
i want to be able to use them !!!
Edited by: 915518 on 19 févr. 2012 12:04
Edited by: 915518 on 19 févr. 2012 12:10

Hi,
There will not any performance issue as such as all the code will be executed by the same Dialog workprocess in the application server.
But it is alwys good to keep you flow logic and application logic seperated, so flow logic just calls the methods and the methods are in a different component like a static method of a class or function module in a function group.
Best thing is Function Group as you can have screens in a Function pool.
Regards,
Sesh

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

Logical AND gate getting falied

Similar Messages

Maybe you are looking for