Logical Component for HANA DB system

Hi Friends,
I am doing Managed System Configuration for HANA DB system.
I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
Can some one suggest.
Thanks & Regards,
Solman Starter

Hi,
What is the error you are getting ?
What your solution manger version and SP level ?
Check below note and see if they help.
1958910 - EarlyWatch Alert For HANA Database
Regards

Similar Messages

Managing more than one logical component in SMSY Current System Assignments

Hi,
I have a problem with managing logical components in TA SMSY in my Solution Manager System, in the section "System Groups and logical Components". I want to maintain more than one logical System e. g. from Type Application Server ABAP --> SAP NETWEAVER APPLICATION SERV.
That means e. g. i want to maintain 2 or more Demo Systems from different Servers or Instances of the same Product Version in the same logical Component .
What I want to know is, is there a way to display these logical components in tne "Current System Assignments" - View in that form
Logical Component is e.g. : SAP NETWEAVER APPLICATION SERV
product/main instance is   : SAP NETWEAVER [Application Server ABAP]
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0        |                                         | ZB1: 100           |                               |                                     |
|--|||--
|
SAP NW 7.0        |                                         | ZB2: 800           |                               |                                     | ...
Thanks beforehand for your help.
Greets C. Peifer
Edited by: Carsten Peifer on Dec 15, 2008 4:03 PM

Thanks for your quick answer,
but i have to say, that this is not exactly what i've been lookin for.
What I need in my System Landscape is to have each demosystem as a logical Component from the same type (e.g. SAP NETWEAVER APPLICATION SERVER ABAP).
So that in Change Management in a Maintenance Optimizer Transaction i can choose between each demo system in my System Landscape (from the type SAP Netweaver Application Server ABAP) that i will maintain in Maintenance Optimizer, e.g. download a new SP Stack.
My Intention is to create new logical components from type SAP NETWEAVER APPLICATION SERVER ABAP in my Namespace e.g. ZSAPNW01, ZSAPNW02, ... and to maintain the types of systems (Demo, Development, Training etc ...) for each logical component.
Is this the only Possibility?
Or do i can also display my logical components the way i descriped beyond?
>
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0 | | ZB1: 100 | | |
|--|||--
|
SAP NW 7.0 | | ZB2: 800 | | | ...

Solution Manager - Logical Component for SAP Netweaver EHP2

Hello,
I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
Thank you very much
João Dimas - Portugal

Hi João,
You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
I hope this help you to proceed further, thanks.
Jay Soma.

Setting Logical component for Test Case.

Hello,
I've created test case in SOLAR02 and I want to link my test case to Quality Assurance in my logical component (SAP ECC).How can i set this link? Now the test cases are link to Developement system in SAP ECC. Please tell me how can i fix it.

Hi,
If you want to perform the testing in QA client, set your system role as "Quality system" in STWB_2 transaction.
By default, the system role has to come as "Quality system".
If it is not check your transport route of the logical component in t.code SMSY.
Regards
Senthil

Change logical component for upgraded satellite

Hello.
After upgrading a satellite system from 4.6C to ECC6, I would like to to change the Logical component in SMSY accordingly. But cannot find an easy way to do that. I would like to keep the actual monitor, alert and reactions configuration in the current solution, and just update the Logical Component.
Actually I am afraid that I have to cancel the system, and recreate it under the new component missing all the settings.
Does anybody know if there is a non destructive way? I'm working with a 3.2 Solman.
Thanks a lot, kind regards,
Dino

Try manually setting it, or change the leading product from R/3 to ECC

SMSY Logical Component for Event Manager

Hello,
We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
Solman is patched to EHP1 SP6. Is there some content update which we need to download to get new components into SMSY?
Thanks,
John

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Logical Components for a project

Hi,
We have ECC6.0 on which we have applied the Enhancement Package 2.0.
While trying to create a project in solution manager for the Business Sceario we selected it is requiring Logical component for SAP ERP Enhance Package.
While trying to create the SAP ERP Enhance Package logical component we are not able to find any systems to attach under that even though we have maintained installed product versions as both SAP ECC / SAP ERP ENHANCE PACKAGE 2005.2. in the system defintion of our development system.
We tried to put SAP ERP ENHANCE PACKAGE 2005.2 as leading product version even then we are not able to pickup that system under the SAP Enhance package Logical component.
Please suggest.
Thanks & Regards
Mrutyunjay

Hi,
In SMSY under landscape components select your system and go to Header Data Tab. Click on Installed Product version. Then select the check box Free Product/Select product Version.
Then you can find your product there. This will solve your problem.
Feel free to revert back.
--Ragu

Creating Logical Component in Solman 7.1

Hi,
I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
Regards
P Kumar

hI kUMAR,
Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
You can try below for creating logical component in SOLMAN:
1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
Thanks,
Prakash

Assign ECC logical component

I have a problem to assign logical component to my ECC system in t-code SMSY.
Every other system works fine...
Please help me with some new things to try!

1. I open the assign logical component wizard
2. for my SAP ECC Server I browse for a logical component
3. Then I select SAP ECC and press ok
And then the error pop-up:
Logical component SAP ECC cannot be assigned to this main instance.
/Micke

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

Logical Component & IMG

Dear All,
I am using a logical component for global configuration. When selecting this LC in a implementation project all the required IMG nodes are showing up. But when using the same logical component for template project a certain node is not showing up?
I will really appreciate the answer.
Sincerely.

Hi Andreas,
Thanks for your reply. Please let me know how can I change the menu configuration?
Sincerely,

XI 3.0 and BW 3.5 system type/logical component in Solution Manager

We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
Regards,
-Rohan

Hi
I believe that SAP hasn't upgrade option for BW 3.5, Check link:
https://service.sap.com/solman-mopz
Upgrade
a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
Regards
William Neira

No monitors pulled for self defined logical component

Hi,
I have defined a system landscape in smsy and created solution landscapes in the sm. For some systems I had to create a new logical component.
My problem: Although RFC destinations work fine, for all systems within the new logical component no monitors are pulled out of rz20.
If I use a SAP-defined logical component it works.
I use Solution Manager 3.2.
Is there any documentation for this problem or does anybody know a solution for this?
Thank you and best regards,
Tim

Hi again,
I thought about the problem and tried several things. The problem is not the self defined logical component. The problem is the product definition. I can`t monitor systems, which I created as product SAP ERP in smsy. The check "SAP System ..." doesn`t appear when I want to setup System Monitoring.
Does anybody have an idea what I do wrong?
Regards,
Tim

Can't assign system to logical component

Hello everybody,
I try to configure my Maintenance Optimizer. I have created a system with main instance SAP ECC Server. In view Landscape components i can see my system in node systems->sap erp. When i try to assign a Logical component SAP ECC an a massage "Logical component SAP ECC cannot be assigned to this main instance" is displayed and component is not assigned.
What have I wrong made? What should I check/configure?
Regards
Bogdan

If you go to help.sap.com and SOlution Manager and look for the assign logical components menu item you will find instructions on this. Basically from SMSY click on the system then on top left menu tree select "Other Objects"
when the popup comes up enter the system id in the "System field"
Then at the bottom of that popup you should see an icon like to pieces of paper called"Intalled product versions" click on that and you get another popup to show products installed on the box. If it is not listed in the bottom , you can use the top section to select the product using free product selection , then you should see this error disappear as you have identified the main instance it is talking about and furthermore you should be able to then assign it to a logical component

Logical Component for HANA DB system

Similar Messages

Maybe you are looking for