Logical database PNP screen

Hi All
I want to initialize the Employment Status to Active employee that is 3.
Does any body know how can I do it.
Thnaks in advance.
Regards
AJ

Hi AJ,
here a simple codeexample, try it:
Log. datenbank PNP (P-Stammdaten)
TABLES: PERNR.
INITIALIZATION.
REFRESH PNPSTAT2.
CLEAR   PNPSTAT2.
PNPSTAT2-SIGN   = 'I'.
PNPSTAT2-OPTION = 'EQ'.
PNPSTAT2-LOW    = '3'.
APPEND PNPSTAT2.
START-OF-SELECTION.
GET PERNR.
WRITE: / PERNR-PERNR.
END-OF-SELECTION.
Regards, dieter

Similar Messages

Selection screen for logical database PNP..

hi all,
I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
i have been looking all around and i got few of the below methods.
its good to use a report category.
somewhere it says include it in ur program using selection screen block..
can you please guide me which is the best way and what would be a perfect solution?
thanks in advance,
Reena

Hi reeena,
1. simple
2. u want to
a) add ur own fields
b) suppress some fields
3. a) is simple, just add your parameters,
   in your program, and they will appear
   b) use SCREEN logic
4. just copy paste to get a taste of it
(it will HIDE the PAYROLL AREA field)
and add MATNR field
5.
report abc.
TABLES : PERNR.
PARAMETERS : MATNR LIKE MARA-MATNR.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME CS 'ABKRS'.
      SCREEN-INVISIBLE = '1'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
regards,
amit m.

Selection screen and logical database PNP

hi all,
I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
i have been looking all around and i got few of the below methods.
its good to use a report category.
somewhere it says include it in ur program using selection screen block..
can you please guide me which is the best way and what would be a perfect solution?
thanks in advance,
Reena

In the Program Attributes, click on the pushbutton 'HR Report Category'.Click on the 'Create' icon in the pop-up window that comes up. You will get a list of all the available Report Categories. Go through the list & if you don't find one that suits you, select one that is closest & click on the 'Copy As' icon in the menu bar..
Now, you can remove the unwanted fields & add yours for selection. save it & and attach it to report in the attributes.
~Suresh

Selection screen for HR report with logical database PNP

Hi All,
I am writing a HR report. And I use the logical database PNP. Also I create a HR report category for this report. In the report category, I can define the selection screen field. But all these fields are selection option format. My question is How can I add parameters, radiobutton group and checkbox in the selection screen. Thanks.
Alex

Hi Alex,
Sorry for replying so late. Please try this tutorial:
w w w. s a p t e c h n i c a l. c o m -> tutorials -> ABAP-HR -> Creating HR Report category in PNP logical database
Sorry, I put it like this, because direct link doens't let me post the answer. Don't know why.
It can also be something with your custom code in selection screen. Though it works fine for, try to remove COMMENTs and observe the result. Maybe parameters are overlapping somehow. First try this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
parameter BFlag type c RADIOBUTTON GROUP grp1.
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If that works together with the report category, try to extend it with adding a selection-screen comment, but do this in reversed order (comment goes first and FOR FIELD addition is supplied) like this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 3(10) text-003 for field bflag. "FOR FIELD, and goes first
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 16(10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If still not working, see if text-003 and text-004 are not too long (you expect them to be 10 chars), This may somehow affect selection screen.
You may also try with setting cursor position explicity by:
SELECTION-SCREEN begin of line.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT (10) text-003 for field bflag.
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN POSITION 16.
SELECTION-SCREEN COMMENT (10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
It is really hard to identify where can be a bug as it is working fine for me. Keep trying with different variations, it should finally run with some.
Regards
Marcin

Add new field infotype "z" in logical database selection screen pnp

Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
Thanks

In case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
    DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
          wa_texpr TYPE rsds_expr,
          lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
          wa_rsds_expr_tab LIKE rsdsexpr.
    REFRESH lt_rsds_expr_tab.
    wa_rsds_expr_tab-arity = '0'.
    wa_rsds_expr_tab-fieldname = 'OBJID'.
    wa_rsds_expr_tab-option = 'EQ'.
    wa_rsds_expr_tab-low = p_aroper.
    wa_rsds_expr_tab-high = '00000000'.
    MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
    APPEND lt_rsds_expr_tab.
    REFRESH lt_texpr.
    wa_texpr-tablename = 'PA9004'.
    wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
    MOVE-CORRESPONDING wa_texpr TO lt_texpr.
    APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM

ABAP Report Program Logical Database PNP

I have a ABAP program using the logical database PNP. The report is config to run on MSS using EP. I have added code to capture the Org Unit when it is pass to the program from MSS. My issue is how do i capture the org unit value that is passed to the program. I have added code to capture field pnporgeh in the START OF SELECTION event. This works great if you are running the program from R3, but none of my edit checking against field pnporgeh works.

Hi John,
I am also having same trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.
Edited by: Ankit Kashyap on Nov 17, 2010 12:40 PM

Logical Database PNP

Hi,
im using standard logical database PNP. After the user filles the selection screen, i want to manipulate some of the selection fields, but evrything i tried out til now does not change the amount of data i got by GET PERNR. How can i manipulate the selection fields to get results according to the new settings?
cu
Rainer

e.g.the user entered start date 01.01.2005 and enddate 30.11.2005.
The report shouls always take end of year so i want to manipulate the user entered 30.11.2005 to 31.12.2005.
Manipulating pn-endda does have no effect.
So which structers or fields i have to change?

How to hide selection fields when using logical database PNP

hi.
i m using a logical database PNP and report catagory 1PY_DEF in my program.
but when i execute it , it shows to selection box. one name is period and second is selections.
but i just want to show only period box selection fields , not the selection box fields.
how it iz possible.

HI,
In my case i haved used the PNP logical database..in the selection box i don't wnat to display Contorling area,Cost Center & Organizational Unit. i have written this code to hide those fields..
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.
Try modify hide the total block instead of individual fields in that block.

Logical DataBase PNP - Adding customised Field

How do everyone,
I have recently added a new field to the HR master infotype 0001.
How does one include this new field within the locgical database i.e. PNP, PNPCE
so that it is automatically included in the report selection screen??
Any help or suggestions would be much appreciated.
Andy

Hi,
Follow the link.
Re: Logical Database PNP. HR and Unicode
Regards
Rajesh Kumar

Possible to modify Logical Database Selection Screen?

We have added a custom field to an HR database and need for it to appear in the selection screen for logical database PNP. The program DBPNPSEL is this selection screen -- has anyone modified this or is there a better way to get this result?

Hi,
Check this link.It contains code sample.
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm
Regards,
J.Jayanthi

Regarding logical database PNP

Hi all:
     I am learning to use logical database PNP,
    Originally, there are some buttons like 'Further selection' 'selection helps ' 'Sort order' at the top of selection screen. How could I control them? If I just use some of them , like 'Further selection' , How could I remove the other two from the selection screen ?
     what's more, How could I add button like 'Org. struture' at the top which doesn't exsit originally?
Thank you very much!

Hi,
You need to select the appropriate Hr Report Catageory in the Program Atrributes. If you did not find the suitable one you can create the new as per your requirement and assign it in the Hr Report Catageory of the Program attribute.
Edited by: Avinash Kodarapu on Mar 11, 2009 3:56 PM

Logical Database PNP. HR and Unicode

Hi,
currently we are checking all programs to make them unicode compliant. Using the logical database PNP a lot of macros is loaded automatically. One of them is
rp_provide_from_last (or rp_provide_from_frst) to get the last record in a specifed time-interval. The existance is stated in varaible named pnp-sw-found, it is 0 if no record was found and 1 if there is one in existance.
Checking the program (normal syntach check and extended syntax check) leads to the warning that varaibale names with a hyphen are no longer allowed in unicode programs if its not a structure (and pnp-sw-found is not). The program is doing well, and transaction UCCHECK does not mention this error/warning at all. Has someone experience with that issue and perhaps a solution?
cu
Rainer

Thanks for the answers so far. Using PNPCE does not resolve my problem, cause we have a lot of own written reports and i just want to avoid to change them all.
And using PNPCE idoes not solve the problem, that i have to use pnp-sw-found, this one is still in existance and gives still the warning that thois is not unicode compliant.
Switching off the unicode flag is no good idea if we wanna go for unicode.
Anyone else with experience in unicode in the HR Area?

Logical Database - PNP, PCH, PNPCE

Hi Experts,
Im New to ABAP HR,
I would like to know about the logical databases we are using .
Logical Database - PNP, PCH, PNPCE, basic principles
If any body cud let me know about the differences , requiremnts , associated with these Logical databses will be much helpful for me.
Thanks
Rohini Devi
[email protected]

Hi Rohini...
Global Employee Programming
Thanks
Message was edited by:
Aslam Riaz

Logical database PNP not retrieving data for custom infotypes.

Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamza

solved

Logical Database PNP cannot fetch correct data?

I use logical database PNP fetch HR master data.
PA0001 has records with company code = 0960 .
But can not fetch data using GET PERNR.
however
PA0001 has not records with company code = 0770 .
But it got so many data using GET PERNR.
WHY..............
person originally transferd from 0770 to 0960, It is OK.

I belive this is not concurent employment why we need to use
PNPCE
Please be specific about your question
Regards

Logical database PNP screen

Similar Messages

Maybe you are looking for