Logical export

In Lookout when I go to Historical data viewer and select a view to export, that is a logical value that is a switch, when I look at the text of the export all
the values are just opposite of the real value of the switch. That is at the time it said the switch was OFF
it was actually ON. Why is this?
Thanks

I did look, and the box is unchecked. I also have a HyperTrend on the same Panel and it follows the switch. If flip the switch up the HyperTrend trace moves up, when I flip the switch down the HyperTrend trace moves back down. But the export ASCII file for the switch shows it is ON when it shows to be OFF in the HyperTrend and the switch on the Panel. If I put a check in the "invert logical signal" the HyperTrend now shows a low when the switch on the panel is ON and the export file now shows it to be ON.
At this point the export file is now following the switch positions but the HYperTrend
Is now backwards. The output to the PLC does not change if the check box is checked
Or not it always follows the switch position on the Panel. I have a logical base p
osition
Of 0 and a Logical True height of 50 in the HyperTrend. Whats up?
Thanks

Similar Messages

  • Logical export in RMAn

    Dear friends,
    Is it passible that we take logical backup(i.e Export/Impot)
    in Rman.
    If yes then.
    Why?
    [email protected]

    Pixels.
    For a 1" x 1" photo first crop the photo square.  Then export  with Kind = Current with JPEF Quality = Maximum and Size = Full size.
    Then when you go to print the photo select a 1" x 1" print size.  This will squeeze all available pixels in each dimension into the 1" dimension giving you the highest DPI resolution available from your image file. 
    More about DPI can be found here: All About Digital Photos - The Arithmetic of DPI and All About Digital Photos - The Myth of DPI
    OT

  • Can Logic Export Audio into a Movie PORTION?

    I am a film composer. I'd like to export as a quicktime movie, my cue(song mix) with the appropriate portion of the movie that it is synced up to. Preferably at a user defined resolution and compression setting (ie: so I can create little preview quicktime movies to show my directors over the net).
    Can this be done?
    And if not, what application would be best to insert an audio file as a soundtrack into a Quicktime movie and get frame accurate results? Does PRO TOOLS do that?
    Thanks in advance,
    Evan EVans

    sorry mate, can't be done. what you can do is;
    1. with quicktimepro, extract the section that you want to do it with. you don't have to save the all the information, you can save it as a file referenced to the orginal film. when you do that, the file will only be about 165k as opposed to Gbs. so it's quick. you can then open that in logic and put your music onto the film and sync. (BTW depending on the codec you are using, you can still use movieplayer that came with authoring goodies back from OS 8 days, and that works in classic, though it doesn't play back very well, you can make the referenced file that works just fine in os x)
    2. import it into imovie and edit out the bit you need, but at that rate you might as well bring the cue into imovie as well. the advnatage there is that you can export the great new codecs with first class quailty and tiny file sizes.
    finally, to my knowledge protools does not allow you to extract and bounce a portion of a quicktime movie. it is a quicktime thing. you have to have quicktimepro.

  • Logical export backup

    LQ = > I exported hr schema with three different option of keyword
    CONTENT = ALL,
    CONTENT = METADATA_ONLY
    AND CONTENT = NONE
    1.with keyword CONTENTS= ALL
    the size of dmp file was 416KB
    2. with keyword CONTENTS=DATA_ONLY
    I got size = 216
    3.Last with keyword CONTENTS=METADATA_ONLY
    Igot size = 316
    here , My question is that with the keyword = ALL and keyword DATA_ONLY I have clearly understood
    that with "ALL" the dumpfile contents metadata + data of schema such as table etc so size was 416KB.
    with data_only the dumpfile only contains object's data so size was 216 KB
    but , why with the option of METADATA_ONLY the size was 316 KB..As in metadata it should be
    416 - 216 = 200 KB ( ALL - DATA_ONLY = METADATA_ONLY)..This is my assumption..If am wrong that
    kindly show me the right concept...
    And One more thing I want to say that if there is any internal things is happening please let me know..hope I will be
    receiving the answer and the concept behind the space that was used by the schemas with various option...

    Hi,
    can you please provide me the hint..that how can I find out the size of master table etc..The size of the master table is going to be different for every job. It is a table that Data Pump creates and inserts data into as the export and import jobs are running. If you want to know the final size, then add
    keep_master=y
    on your expdp or impdp command. Then what I did, was to export just that table and see how big it is.
    expdp system/manager schemas=hr ... keep_master=y job_name=foo
    expdp system/manager tables=system.foo ...
    And one more concept I am eagerly waiting to know from you that during datapump when I used to export the whole database >, there I found the warning / error
    ORA-39139: Data Pump does not support XMLSchema objects. TABLE_DATA:"OE"."PURCHASEORDER" will be skipped.
    I think that XML schema is not supported by our newly feature of export( datapump)
    I have done this by giving the command
    expdp directory=test_dir logfile=full_database.log dumpfile=full_database.dmp full=y
    Note: but , when the same database was exported through the old feature (exp) , the database full was exported successfully >without any error...
    can you please throw some light in this regard...You don't say what version you are on, but I believe that support for xml types was not in 10.1 Data Pump but was in old exp/imp. I also think support for this was added in a later version for Data Pump, but I can't recall the exact versions. If you have documentation, you should look at that.
    Dean

  • Exporting tracks from Logic 8

    Hi,
    i've figured out that when I'm exporting tracks from Logic ("export all tracks as audio files"). Some of them get automatically normalized and don't have the actual volume of the "mixdown".
    Does anybody now, why this happens? I guess it happens only with Logic's own synths and not with 3rd party plugins.
    Greets

    F~L~E~X~I~S wrote:
    Has anyone found a solution for exporting a Logic 8 session into Logic 7? (Obviously apart from exporting all tracks as audio files).
    Nope, Logic 8 is not backwards compatible with 7.

  • Export button and Internet Explorer

    Hi, I am using the export button to export table data into .csv file. The file, when viewed via notepad looks like this:
    "Allen, G,""5258"",""31"",""MSI US"",""Printer ASIC"",""1"","""","""","""","""","""","
    Since there is a " at the start of the line and the very end, the entire row is considered a column and when opened in excel shows in one column only.
    This behavior is different when using the export button through the FireFox browser. The row, when viewed via notepad looks like this:
    "Allen, G",3083,31,MSI US,Printer ASIC,1,,,,,
    and when opened in excel shows each of the values above in a seperate column. Which is the right behavior.
    Any anyone help PLEASE. This is critical to our go live!
    Sheena

    In general, FWK export logic exports the text enclosed by " (double quotation) regardless of the browser. If original data includes ", it will be replaced with "" when exporting. This is also browser independent. Thus exported data should be same basically regardless of the browser, the behavior reported here should not be observed. As long as I quickly tested FWK export function using a testcase, I saw the exported text with quotations in IE and Firefox.
    Please file a bug to the product since the product might have own exporting logic. If product team thinks this issue is a fwk bug, please have them file a fwk bug with jdev testcase.
    Thanks,
    - Takafumi

  • Exporting WAV Files with looping

    Hi
    I have a collection of sound effects that I've prepared in Logic. I've been exporting them to WAV files for use by another application. I do this with File->Export->Region as Audio File. This is all good.
    The prolem I have is that I'd like some of them to loop. So I've been using a PC and Sound Forge to add the WAV sustain information to the WAV file. I'd really like to keep my workflow on the Mac and in Logic.
    So, my question: is there a Mac app that can add the WAV sustain or can Logic export it? (I've tried Sound Studio and Audacity already with no success).
    cheers
    peter

    Even though Logic has a 'write loop to file' function, I often find that the loop info either doesn't stick, or is invisible to other apps.
    Loops added in DSPQuattro seem to always work, and probably with Peak too (I don't have Peak so I can't check.)
    But you can get SoundHack for free and that will also write readable loop points to files.
    No Logic user should be without it.
    It does so many useful things you can't usually do in DAW apps like Logic.
    Get it here:
    http://www.soundhack.com/freeware.php

  • How to export Web Provider automatically

    Hi,
    I need your experience on Portal 9iAs rel 2, on how to esport web providers automatically.
    I explain better: I use the export utility, (a very good utility) to export my pagegroup and all portlet reference.
    I didn't find any Oracle Exp Procedure to make a logical export of my web providers (All my Web Portal is developped with Web Providers).
    After making a logical export, after making a copy of my applciation, when I access in the providers builder to edit portelt, I find the old url... so I have to change all url reference... Is it possible ????
    Please tell me if exist some export procedure to copy my web portlet online.
    Thanks
    Tiz

    AFAIK, there's no template for generating web.xml.
    Navigate to <TomcatInstallDir>/webapps/
    You would find lot of directories - each one being a web application.
    Navigate to any one, say ROOT and then to the WEB-INF directory
    under that.
    You would find a web.xml.
    Copy it into your <web-application-dir>/WEB-INF folder and make necessary changes
    cheers,
    ram.

  • Export and RMAN

    Hello,
    Can logical export (exp) and RMAN backup be executed at the same time in both UNIX or Windows platforms??
    Thanks.

    Can logical export (exp) and RMAN backup be executed at the same time in both UNIX or Windows platforms??yes

  • How to work around audio sounding worse in Logic?

    Hi Folks
    We just bought Logic 8 for its MIDI, composing/scoring and loop/instrument resources. Have used Nuendo for 5 years, for audio for video, which has included some music creation.
    I did some quick recording/playback audio tests and here's how I hear the results:
    Voice recorded and played back in Nuendo sounds just like live. Voice recorded in Logic and played back in Logic sounds relatively flat and digital. Voice recorded in Nuendo and played back in Logic sounds relatively flat and digital. Voice recorded in Logic, exported as a file and played back in Nuendo sounds just like live voice and like it was recorded in Nuendo.
    So how do you work around the crummy sounding audio in Logic? Is the problem only the audio playback within Logic? Do you compose in Logic, export as files and then mix in another app? If so, which app? Or do you know the export will sound better outside of Logic? Or what other adaptation have people come to?
    Thanks for reading.

    No audio problems with Logic Pro 8 my side. In fact, it is sounding somehow better than Logic Pro 7 and latency is better. 44/48/96 all sounds great! Bus, FX, output, EXS24, etc. etc. -- wonderful stuff.
    Interface wise everything is at my finger tips and I didn't have to do anything to get my control surfaces to work (Mackie). Everything makes sense -- huge improvement over LP7. Really helps me explore being creative.
    So far Logic Pro 8 is an amazing step forward -- good work Apple.
    Thank you Apple.

  • Export full database

    How does export full database work in data-pump .Does it also exports system and sysaux tablespaces or only all schema data and related metadata.

    DataPump is a logical export, so it works with DB objects - schemas, tables, views, etc.
    So when you perform full export - then all info from sys/system and other users is exported to the dump

  • STP2 - Exporting MP3's

    hey!! i know in the original STP you can't save as an mp3, but i read somewhere that STP2 does MP3 importing AND EXPORTING!!!
    from apple's sales pitch:
    "Export mixes as AIFF, WAV, NeXT, SDII, MP3, AAC/Podcast, Dolby Digital Professional (AC-3), or using Compressor"
    i can't still can't see anyway to save/export a file as an mp3... i'm i just being thick?? has anyone one else seen how to do this?
    cheers!!
    john~

    thanks for the reply!! the export option however is grayed out!?!
    i only use stp to edit audio files, not multi track projects, is this feature only available when exporting a project??
    an example: i finish writing a track in logic, export the project as a nice hq aiff, drop it into soundtrack pro to run it through my t-racks mastering preset, save another aiff, then it would be nice to also save it as an mp3 to email to people. is this still not possible?
    it seems a bit mad that you can bounce a whole complex project to an mp3, but not a simple audio file!?
    any advice would be appreciated
    john~

  • The Mother of all Easy Questions...I hope!

    I just got Logic Studio recently giving me very little time to learn how to use it before needing to create accompaniments for a concert that's coming up. Having only ever used Garage Band (starting simple) in the past I am trying to figure out how to get my accomp's onto a CD. W/Garage Band you just export things to iTunes and burn them. Piece o-cake Is it that simple with Logic or do I have to convert Midi files to Audio files and do I have to use Wave Burner? Bottom line...My concert is Monday...I'm looking for either a reference to where I can find this info in the manuals (I've gone through the contents several times and can't find a heading that sounds pertinent to my needs)...or could someone please just tell me how to do it.
    In a crunch....

    In Logic, exporting files is called "bouncing." That is located under the file menu. In the bounce window there is an option to automatically load the file into iTunes once it is finished bouncing. Make sure that box is clicked, and there you go, just like garageband.
    And no, you don't need to convert MIDI files. Logic includes all active, unmuted tracks as a part of your audio mixdown.

  • How to removed the 300GB old archive logs???

    Dear Gurus
    Site-A
    Our Environment:
    Live Production 2-Node RAC Oracle10g r2 10.2.0.4
    Data and Archive is stored in Oracle ASM
    Operating System: Sun Solaris10 64bit
    We have two databases.
    ==>db-1(Site-A db-1 is Oracle streaming with Site-B db-1,so archive logs should not be deleted which is required for oracle streaming)
    ==>db-2
    Existing Backup and Recovery Strategy:
    Daily logical backup of application schema using DATA PUMP.
    We have not taken any RMAN Backup still.
    Please find the status of Shared Storage.
    -bash-3.00$ asmcmd
    ASMCMD> lsdg
    State Type Rebal Unbal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Name
    MOUNTED EXTERN N N 512 4096 1048576 614256 577801 0 577801 0 DATA/
    MOUNTED EXTERN N N 512 4096 1048576 298948 38635 0 38635 0 FLASH/
    We want to removed the old archive logs?
    Please suggest the best way of removed the old archive logs for db-2 and db-1?
    Can you Please suggest that how many time and how many space it's required for completed the backup?
    Regards
    Hitesh Gondalia
    Edited by: hitgon on Oct 1, 2011 9:50 PM
    Edited by: hitgon on Oct 1, 2011 10:09 PM
    Edited by: hitgon on Oct 1, 2011 10:13 PM

    You should consider using RMAN for backup/recovery. Logical exports (Data Pump) are useful for some purposes, but are not the preferred way to go for your backup and recovery needs. RMAN will give you better performance and so much more options.
    Long-term, a great way to delete archivelog backups is via RMAN “backup archivelog …. delete input” and/or “delete archivelog … “commands.
    Please delete archivelogs only after they are already backed up. RMAN will also take into consideration if the backups are needed for Streams and/or Standby.
    About the backup space – a full RMAN backup is typically smaller than the size of your DB. You need to run a test to see the exact size. The frequency and type of backup should be based on your SLE for this DB.
    Iordan Iotzov
    http://iiotzov.wordpress.com/

  • Problem with Oracle 10g Backup

    Hi all! I'm using an Oracle 10g Database installed on a Windows 2003 Server. I have some problems configuring backup policy. First time I configure backup, the flash recovery area size was too small. Waiting for a new disk to arrive (this is a test enviroment), I had to disable archive log mode and now the only backup I can do is logical: export of the entire database. The problem is that Oracle 10g continues to make backups every night and creates empty folder with the data in which the backup was started. I want to completely disable the backup policy. How can I do this? Is it possible to view which is the backup policy defined without using EM console? Infact from the EM console seems that there is no backup policy defined. Thank you for your attention.
    Stefano.

    Ok! I've solved the problem. It was sufficient to eliminate the job executed for the backup from the first tab of the EM console.
    Bye.

Maybe you are looking for