Logical name reset after system copy
Hello
I´have a question regarding logical system set after performing a database copy from Production to Quality . In Quality the former logical system name before the copy was INT10 . After the refresh I want to runs the BDLS with conversion from the prod PRD10 to Quality INT10 . But when I run the BDLS I 've the error the logical system INT10 already exists . Can I remove this entry in the
BD54 in order to be able to specify INT10 as the target in BDLS ???
Thanks a lot for your advice .
Hello
In fact it worked it test mode but failed in Run mode . The job RBDLSMAP ran 1 seconde and stopped Here is the conversion report in the slg1
< SAPoffice No object reference exists -> No conversion
< SAPoffice Object references that have been converted: 0
Table buffer in server synchronized after conversion
< The processs is executed in the background (RBDLSMAP 11041701) in sys
I have one table which Field in table contains the name INT_010
BDSX_CON04* LOG_SYSTEM 0 0 <<
When I have a look in the SCC4 the logical system name is still set to EXP_10 .
No conversion took place here .
Just a question , iI triggered the conversion in the client 000 . is ti correct or must it be triggered in the productive client ?
Thanks in advance
Similar Messages
-
Logical System Name after System Copy
Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
KeishiHi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit. -
Change logical system names after system copy
Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
JürgenHi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis. -
Problem with extractors after system copy
Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers..... -
Post processing after system copy from standalone to cluster enviornment
Hi,
I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
The steps I have followed as follows.
. setup the machines in the cluster environment ( Windows 2003 EE server,sql 2005 SP3)
. Backup the current database in the source system
. Given a different SID (TBW) during the System copy installation .its a dual stack installation.
. Restore the database in the target system and select the back up restore method during the system copy database installation step.
.The installation completed successfully and i m having some doubts regarding the post processing steps after this .
We want to retain the same client in the target system ,for this i need to rename the logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
Thanks
Arun PadikkalHi Arun,
You should probably post this question in a basis forum.
Cheers,
Diego -
J2ee engine does not start up after system copy
Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
TajinderHi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments :
arg[00] : jcontrol
arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=64380
arg[04] : -DLISTEN_PORT=64381
arg[05] : -DSAPSYSTEM=00
arg[06] : -DSAPSYSTEMNAME=BD1
arg[07] : -DSAPMYNAME=BWQAS_BD1_00
arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
arg[09] : -DFRFC_FALLBACK=ON
arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host : BWQAS
-> ms port : 3601
-> OS libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : BWQAS
-> ms port : 3601
-> os libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : ppc64
-> heap size : 512M
-> root path : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder -
License Error after system copy
Hi,
After system copy licensing the sap giving this error.
MLICHECK0 in *LIBL type *FILE not found.
MLICHECK__0 in *LIBL type *FILE not found.
MLICHECK~I1 in *LIBL type *FILE not found.
MLICHECK in R3BDDDATA type *FILE already exists.
Alternative name for file MLIC0002 not allowed.
"MLICHECK~0" in R3BDDDATA type *FILE already exists.
Help me to solve the issue.
Thanks and Regards
G SinghHi G Singh,
this error message "smells" extremly like RCLSTG *DBXREF !
If this problem is still your pronblem, I would run this command - in restricted mode - takes only about 30-60 minutes ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
Errors after system copy ...
Dear all,
envi--- AIX 5.3 & oracle 10.2 -
ECC 6.0SR1 ABAP ........only
I have restored a backup of PRD to QAS successfully ... for system copy...
I have created ops$ users with following statments..
create user ops$qlyadm identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( sidadm)
create user ops$oraqly identified externally default tablespace PSAPSR3USR temporary tablespace PSAPTEMP quota unlimited on PSAPSR3USR ( orasid )
Successfully created control file & managed to take the database up...
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1728053248 bytes
Fixed Size 2071840 bytes
Variable Size 872415968 bytes
Database Buffers 838860800 bytes
Redo Buffers 14704640 bytes
Database mounted.
Database opened.
SQL>
after the following action when i tried to startsap. with user sidadm the following is the message..
Checking QLY Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
Start of saposcol failed
Running /usr/sap/QLY/SYS/exe/run/startdb
Trying to start QLY database ...
Log file: /home/qlyadm/startdb.log
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
athomedev:qlyadm 26>
As a result when i checked startdb.log the following is the message.......
Fri May 29 16:03:32 IST 2009
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Fri May 29 16:03:32 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-10997: another startup/shutdown operation of this instance inprogress
ORA-09967: unable to create or open lock file
IBM AIX RISC System/6000 Error: 13: Permission denied
Disconnected
Fri May 29 16:03:32 IST 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/QLY/SYS/exe/run/startdb: Terminating with error code 12
Request to advice me on the following & also advice me the way i created ops$ users is that right way or not..
rgds,
rahul...
Edited by: Rahul on May 29, 2009 4:21 PMDear all,
thanx for sharing,, I have actually odnea mistake after system copy. I tried to make the system up with out creating ops$ suer.
I have followed notes
361641 Creating OPS$ users on UNIX & created ops$ created ops$ user with automated script & from attchment provided in Note 50088 - Creating OPS$ users on Windows NT/Oracle
after that
alter sytem sapr3 account unlock;
system is up & runnig.
regards
ravi kiran -
BDC programs affected after system copy.
Dear All,
We are facing a problem after system copy with regards to the HR module.
Client have created a BDC programs and it was running fine in the old server.
After the system refresh, one of the BDC is having problem and following is the brief,
1. While running a user transaction in FOREGROUND, the program is running correctly and in BACKGROUND the program is calling some other action which is not recorded in the BDC. One observation was made that, while running in DEBUG mode, with the background option, the program runs correctly.
2. In program we are calling 2 PA40 actions, whose sequence no. are 28 and 61 resp. In background mode the program calling some other PA40 action whose seq no is 22.
Is there anything we are missing in the profile or some settings in the applications to run the BDC program correctly?
Regards
PrasNo, I haven't run that transaction.
I have checked the old server, and the logical system is PRDCABS500 and the same is present in the new system.
But I am amaze that the other BDC's are working fine, just 1-2 bdc are having problems?
I have checked BD54 in new system its still showing the old..
What do you recommend and when should this activity to be done( I information says that no users should be present?).
Edited by: Prashant Dhas on Jun 13, 2008 7:05 AM -
RFC users locked after system copy in production system
Hi,
BW_User,MDBTC(RFC users) system users were locked in our BI Production system at the same time system copy activity was running in the Quality system(production to quality) so as per our colleagues concern after system copy they started Quality system with out changing background work-process 0 so some jobs were triggered which were copied from production system.
Is there any cause to lock RFC users in production system for system copy? If there is any other reason where we can check logs
Thanks
Jalandhar ReddyHi,
Well maybe i am wrong to analyze your problem .
Anyway I faced this issue to in our system before and we found that one background job was running in a system that has basically prompting an RFC connection to another system. In the t.code SM59 and there was wrong password was put in.We just reset the password and it was worked fine.
You can try for this..
Regards
Bhuban
RKFL -
Report issue , logical name of the system has been changed
Hi
Recently our system has been upgraded to ECC5.0. In a particular report while drilling down we get error. The error says the original doc can not be shown as it belongs to logical system ( DRH-123) . Now we know that this logical name of the system was in old box . The new logical name is DRH-100 . We are saying it's a basis issue and the basis team is saying it's FICO issue.Has any body encountered this type of problem. ? In my report i have never mentioned logical name of the system.Hence unable to understand it. But so far what I have understood , that the each box has been partioned and given a system name which is called logical name.Now that logical name they have changed in new box.My initial response was change the logical name but basis says that is a big task and more over it has been a while when they changed it.
Gurus, Kindly shed some light on this mess.
Thanks in advance
SatyaWhich report are you pulling out? T-code?
This link has some that may help you:
www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli
Do CTRL+F to find Logical Systems
If the link doesnt work use the following keywords and google it, shoose second result: EDI IDOCS interface axel angeli sap
You may also want to get in touch with the person who was involved in developing LS. Talk with your ABAPer, they normally have an idea about these things (well atleast my ABAPer knows!)
Message was edited by:
Vj -
Accounting document not copied after system copy.
Hi,
We copied the production system into our test system using backup/restore. In the post copy verification, our CO team complained because they could not see the "accounting documents".
What do you think happened why the accounting document was not copied?
thanks
krbasHi Krbas,
Make sure you did all the post processing activities after system copy. I doubt you missed some post processing activities related to CO after your system copy.
regards,
VInodh. -
User password problem in RFC after system copy
HEllo,
we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
Have you an idea to reimport succesfully these informations ?
Thanks
lionelHello,
We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
This are exactly way we perform it:
Before restoring DB :
export table via R3trans for tables:
RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
export users via scc8
Restore DB, truncate upper rfc tables, import rfc Tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
Import Users via transport generated by scc8
run scc7 as post actions
Tuncatate/re-import rfc tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
What else could be done ?
We have a lot of RFC. so re-enter all password is really a hudge task ..
Thanks a lot for help -
Cube is still assigned to original system after system copy
Hello Experts,
After system copy (BW and ECC), some cubes are still assigned to the original system.
Displaying the flow, the cube is assigned to the new system and the original one and the error message RSAR203 "Source system & (old one) does not exist" is araised.
I see that RFC connexion with original system are still in the system (were not deleted by basis team).
I have this problem only for cubes.
Any idea how can i fix this issue?
Thank you in advance.
Edited by: SALHI Amal on Oct 13, 2011 11:37 AMHI,
You can try the tcode 'bdls'. in this tcode you copy all tables to new source system.
Regards,
AleX -
How to find old hostname remained in new system after system copy
Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
IkueHi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M
Maybe you are looking for
-
I have a new iMac and apple tv. When trying to use airplay to mirror video using safari on my iMac to apple tv, alI get is sound but no picture. Can I get the picture??
-
How to control which AppServer is used for a process?
Hello experts! We have the problem that we have 3 Servers from which are 2 running at 99% and one has nearly no processes running. Is it possible to control on which ApplicationServer a process is starting? I know, there is a possibility for process
-
Automatically reset file sharing in Server
Hi everyone. I have a Mac mini with Server (Mountain Lion) and file sharing enables. When I turn tehe unit on, computers on the same network can't find the shared folders until I turn file sharing off and on again. Does anyone knows what's happening?
-
EMERGENCY: what kind of jdbc driver should I use?
Suppose one machine with 9iAS standarv version installed, and another one with oracle8.1.6 installed. OSE is used for JSP and servlet engine. In this case, Oracle internal JDBC driver does not apply, am I right? Then what kind of JDBC should I used t
-
Cisco Wrvs4000 VPN router quick connect not working
I think I am losing my mind, I have an WRVS 4000 version 2.0.1.3 I have: created an account in the client acces list in the router ensured I have allowed VPN pass through for ipsec, pptp, l2tp installed the cisco quick connect client on the remote st