Logical Network issue

I am using SCVMM in windows 2012 R2 standard and Hyper-V role enabled in Windows 2008 R2 sp2.
I've created logical netwok in VMM but here it is not deploying the local switch in hyper-v, I need some assistance on logical network communication between vmm & hyper-v.

It's hard to tell where you are in the jungle of configuration here, but I would recommend you to read the following whitepaper which covers the entire setup of the logical network/logical switch deployment to the hosts:
https://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
I did also do this session at TechEd last year, showing how this should be deployed from the ground up:
http://channel9.msdn.com/Events/TechEd/Europe/2014/CDP-B327
And last but not least, here's a Powershell script (purely demo based, unpolished, ripped rout out of an open - ongoing editing ISE session :-) ) that shows how these things are related to eachother:
https://gallery.technet.microsoft.com/SCVMM-Fabric-Controller-a1edf8a7
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Similar Messages

  • Bare Metal Deployments: The BMC can't have IP Address defined in logical network?

    I have defined a logical network, a logical switch, and a port profile.  I apply the logical switch (the NIC teaming settings) and a virtual network adapter that inherits the hosts network configuration (pass through config. no software defined networking)
    to each of my Hyper-V hosts successfully.
    The issue occurs once I have defined that logical network, I can no longer deploy bare metal hosts because the BMC obtains an IP within that logical network.  You see the BMC IPs and NICs are on the same subnet/VLAN.
    What's the best practice or perhaps best method to get around this issue?

    I am not sure if I follow you on this one.
    You have created a logical network for your BMC in VMM? If so, why have you done that?
    The bare-metal process requires both PXE and
    DHCP during this process, and the scope should therefore be in DHCP and not VMM for this purpose. 
    Can you try to do that? (If this is a lab environment, you could add the DHCP service to your PXE server or even VMM server).
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • VMM2012 SP1 console giving error message when trying to assign logical networks

    Hello,
    we are encountering the following Situation.
    I have a new Hyper-V Cluster (2012) with at that time two nodes.
    When I try to configure the Logical Network connectivity on a virtual Switch (Preparing the use of multiple VLANs) it works on one of the nodes but on the other one we are getting the following error message:
    Virtual Machine Manager
    VMM is unable to process one of the provided parameters for the cmdlet (Set-SCVMHostNetworkAdapter):
    Cannot convert 'System.Object[]' to the type 'Microsoft.SystemCenter.VirtualMachineManager.HostNetworkAdapter' required by parameter 'VMHostNetworkAdapter'. Specified method is not supported.
    ID: 12416
    Does anyone has an idea what I am missing here?
    Thank you
    Sascha

    Could it be possible that your network adapter does not support VLAN tagging?
    I've run into this issue in my lab using consumer oriented NICs and trying to VLAN networking. A good test would be to do the following:
    Go to Hyper-V Manager
    Create a Virtual Switch and set it to a VLAN.
    Do you get an error message? If so, your NIC (or NIC driver) does not support VLAN tagging. If not, then you are fine and you have a problem with VMM somewhere.
    This issue can also occur due to bad drivers on a NIC card as well.  However, for troubleshooting purposes, you will want to go down to the lowest level (Hyper-V Manager) to make sure that this isn't a Hyper-V issue and really is a VMM issue.
    Hope this helps!
    -Bill

  • Logical Network not showing up in Cloud Settings

    In my SCVMM environment, I had the default Logical Network that gets added as soon as you add a cluster or host into it. Since, I wanted more Networks like DMZ Network and Networks based on Departments, I went ahead and created those in the Logical Network
    and defined IP Pools in it so that When I provision a Virtual Machine through Windows Azure Pack, Users can be see all the Networks.
    I am facing a problem when I try to add the Logical Networks in the Cloud.  I am only seeing the default Logical Network and unable to see the Logical Networks that I created manually?  What could be the reason?  How can I troubleshoot it?

    I don't know if they have been uploaded or matched.  I did see the tracks on my phone of the new album I imported into my computer.  So I think some syncing has ocurred.  But there is no download button on my phone like there is for other tracks I have uploaded.  All the tracks are greyed out and I can't play them on my phone?  Any ideas?

  • Logical Switch and Logical Network

    Hello All...................I have Hyper-V Failover Cluster based on 5 Hosts and I am managing it with VMM 2012 R2. I was slightly confused with respect to Logical Network and Logical Switch in the Fabric Settings.  I would appreciate if someone could
    shed a little light on the difference between them.  Also, while there is a Logical Network defined by default (Name of the Virtual Switch of Hosts), there is nothing defined in the Logical Switch.  Which one is mandatory? Logical Network or Logical
    Switch? Can I delete the default Logical Network?

    Hi Nick,
    Please find below link for the whitepaper mentioned by Kristian.
    https://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
    For a complete reference please refer below series. This covers VMM 2012 SP1 but should be fine with R2 as well.
    http://blogs.technet.com/b/scvmm/archive/2013/01/08/virtual-networking-in-vmm-2012-sp1.aspx
    Logical Network is defined for easier management and used in Network Virtualization where as Logical switch is used to configure networking in multiple Hosts rather than creating individual Virtual switches in each host. If it were me I'll leave the
    default logical network as there is no harm of doing nothing in it.
    I hope this will shed some light into your situation.
    Thanks,
    Janaka
    Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

  • How to resolve network issue or dns to access web page on snow leopard server?

    I have my network setup like as follows:
    internet > router 1 > ethernet ports > switch > router 2
    I have a mac osx snow leopard server connected to "router 1", but it is so slow when accessing a web page hosted on the server from a browser on a workstation connected to either router 1 or router 2?
    Is there a problem with my network setup or maybe because I changed the name to newservername.local?

    @Jeff and @Camelot,
    I think it is a DNS issue.  I completely reset the DNS settings on server and the local name with the steps below, but now cannot access the site hosted on the server at all
    I used a modified version of http://www.mkahn.com/2010/09/configuring-dns-on-mac-os-x-10-6-snow-leopard-serve r-for-hosting/ to reset the server set
    1.  Stop DNS Service in Server Admin
    2.  Close Server Admin
    3.  Obtain 10.6 DNS Default files (below)
    4.  Overwrite the DNS files with DNS Default files:
    /etc/dns/loggingOptions.conf.apple
    /etc/dns/options.conf.apple
    /etc/dns/publicView.conf.apple
    /var/named/named.ca/etc/named.conf
    /var/named/named.local
    /var/named/localhost.zone
    5. Restart your server
    All machines have 1ms ping responses within the network including this snow leopard server that I am trying to setup.  There is another test web server that return pages instantly within this network so I doubt it is a network issue, but a DNS issue.

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

    Hi all.  We're having a odd issue with two guests on our 2012 R2 failover cluster.  
    In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
    At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC.  Interestingly, that had no affect on server B's connectivity.  
    The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.  
    Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
    So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.  
    Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
    Thanks! 
    George Moore

    Hi Sir,
    I'v never seen this before .
    >>Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    They are connecting to same virtual switch ?
    First please run cluster validation to check if there is any error .
    If it is ok , please try the following items for troubleshooting :
    1. shutdown  serverA   serverB
    2. then add another virtual NIC for serverB
    3. start server B  check if the issue happens to both "old" and "new" virtual NIC .
    In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
    If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
    Best Regards,
    Elton Ji
    If it is not the answer please unmark it to continue
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • IPhone 4s 64GB Network Issues

    I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
    I have attached the console logs from my iphone that  retrieved from the iPhone configuration utility from a time when the issue was occuring.
    Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2498, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:07:29 unknown kernel[0] <Debug>:
    Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
    Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
    Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2499, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
    Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
    Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
    Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2523, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:09:29 unknown kernel[0] <Debug>:
    Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2524, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
    Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
    Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0.  Returning it back to normal.
    Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
    Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
    Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
                  "DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
                  "DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
      Payload as original URL: [/calendar/dav/[email protected]/user/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
      Number of HREFs: [1]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
      Number of HREFs: [2]
      Unauthenticated: [(null)]";
                  "urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
                  "urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
      HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
      Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
      Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
      Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
    Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
    Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
    Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
    Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
    Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
    Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  0 (ID=103)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter  1 (ID=104)
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2667, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
    Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:13:48 unknown kernel[0] <Debug>:
    Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
    Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 0 -> 0
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
    Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
    Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS:  @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel =  7, encryption = 0xc, ap = 1, failures =   0, age = 2668, ssid[ 9] = "CMSFLWLAN"
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
    Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
    Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
    Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
    Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
    Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
    Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from  to (null)
    Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
    Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
    Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
    Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
    Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
    Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
    Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
    Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
    Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
    Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
    Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
    Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
    Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
    Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
    Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
    Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
    Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
    Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
    Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
    Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
    Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
    Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
    Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
    Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
    Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
    Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
    Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
    Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
    Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
    Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>.  Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior.  This method will no longer be called in a future release.
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
    Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
    Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
    Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
    Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
    Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
    Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
    Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
    Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
    Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
              entries =>
                        1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
                        2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
                        11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                        12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
    Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
    Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
    Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
    Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

    *228 option 2 might work. All phones can be different.

  • Network issue with initial connections on Hyper-V

    This is the opposite of all the other networking issues I have seen with Hyper-V- anyone run into this?
    I am running Hyper-V on a Server Core installation, and have had the same issue when I used Server 2012R2 as when I used Server 2008R2 on the same server as a virtual host. The server is an HP ProLiant DL360 Gen8 with 2x 8-core processors, 32 GB RAM. The
    VM is sized and configured to stay within 1 NUMA node. It uses a single port of the 4-port HP/Broadcom 331 NIC, with all the TCP LSO settings disable at the switch, host, and guest, same with the power management settings. We have ProxyARP on the network,
    so I have set the ArpRetryCount key to 0.
    I have seen it happening with and without SR-IOV enabled. The guest OS is an RDS server, so for the sake of our CAL's it has to stay at Server 2008R2. I have set up a HOSTS file to mitigate this problem, as it seems to be a DNS issue- Here's what happens:
    The first time I visit a resource, the server will timeout. An example not in our HOSTS file does this consistently: If I go to https://mail.mydomain.com/OutlookWebAccess, it spins for a couple of minutes before timing out. I hit refresh and the page loads
    immediately. This server is colocated in-house, as is the mailserver. I'd say it is a DNS issue at some level, but I'd like to know what level it is- Is it just timing out trying to cache the DNS request, or is there a performance issue with a DNS server on
    the network? (All of our DNS is AD-integrated running on DC's).
    Here is where I'm seeing this:
    Internet Explorer- described above
    Salient Interactive Miner- at the login screen, it searches for a database and times out. If I go to the setup and enter the IP address, it still times out. It will not find the database server until I quit and restart the program. If this is the same issue,
    it would obviously not be a DNS problem.
    I DON'T see it in GP9 connecting to a datasource
    Prior to setting up the HOSTS file, I saw this in Windows Explorer connecting to network shares on the same LAN segment.
    This appears to only happen to the Hyper-V guest OS. As a best practice, whenever Windows Update runs, I update the Integration Components.
    I have the bindings properly ordered on the guest VM, with the network adapter the goes to the physical NIC first, and IPv4 ordered before IPv6.
    All updates are isntalled, and the firmware is at it's latest revision.
    Any ideas?

    Hi Daniel,
    " This appears to only happen to the Hyper-V guest OS. "
    Do you mean that any other hosts can access the network resource normally  except these VMs ?
    If yes , my suggestion is to disable the VMQ on the physical NIC  for the VMs , then try test again .
    Best Regards
    Elton Ji
    If it is not the answer please unmark it to continue
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Network issue in iPhone 4 on iOS 6, iOS6.0.1, iOS 6.0.2, iOS 6.1, iOS 6.1.1 and iOS6.1.2

    Hello,
    Ever since I upgraded my iPhone 4 to iOS 6 last year. I am having network issues.
    I have been monitoring my wife's android phone whenever I have a network issue on my phone (Both of us use the same provider and the same voice + data plan). The android phone has never had any network issues.
    This rules out any issue with the provider and/or network issues.
    Sometimes its the cellular data that does not connect or sometimes it doesnt connect to the network at all. I will have to do a cold start to get the phone up and use.
    I expected this to be solved in all the subsequest fixes that were released. I am disappointed even with the iOS 6.1.2, the problem still persists.
    By phone was superb when i was using it with iOS5. This iOS6 is a big disappointment.
    The problem is even more when I am indoor. When everyone around have proper network on their phone, I read "NO SERVICE" on my phone.
    My patience is running out now. I have been waiting for the past 5 months (a loyal apple fan) and I think I have to now take a decision. I cant make basic phone calls when I want and its really irritating when I see NO SERVICE when I want to make the call. Most of the time I end up switching the AIRPLANE MODE ON and then OFF to get the network again.
    Sometimes the call drops and network goes off if I answer or make a call when my CELLULAR DATA is on (2G or 3G) or on Wifi.
    Is there any solution to it?
    Ajay.

    I had been holding off downloading iOS 6 ever since it was released and today was to be the day... no more.
    Thank you for the warning!

  • Issue with LDAP Connection becuase of Network issue

    Hello All,
    We have some network issues going on which is causing the NIC (Network interface card) to failover to another NIC. Due to this failover SUN access manager's LDAP connection pool fills up and we see errors in logs "Directory is down". We have to restart the Access manager to resolve this issue which refresh the connection pool of LDAP.
    Now we have set the setting as recommended in admin guide/tuning guide. Like
    1. Set event connection idle timeout to less that firewall or loadbalancer idle timeout value.
    2. event connection retry count and interval on perticular error code.
    Despite of above settings its not working out. Is there other way to get all the stale connections back to the LDAP pool without restarting the server?
    Or something which handles the network failover or failback?
    Regards
    Chetan Kulshrestha

    The user search name is the value you should be looking at in the LDAP attributes, that's the one that it will send to LDAP on a logon attempt. If you changed this value after mapping a group, I'm not sure but you may have to remap the group to get the change.
    So on the LDAP side verify the user search attribute = the username you expect to login with (i.e. cn, samaccountname, uid, etc)
    Regards,
    Tim

  • Removing Logical Networks and Subnets from Hyper-V Host Network Adapters that are greyed out

    Hello All
    I am new to SCVMM 2012 R2 and I have create a Hyper-V Cluster and now creating Logical Networks and Port Profiles and Logical Switches. I have figured out how to create all of them properly now, but I have made some mistakes in the past. I have a Logical
    Switch created and assigned to network adapters on the hosts. Now I am trying to add the other switches to other adapters, but I have associations on network adapters to Logical Switches and Subnets that are not correct and need to be removed so I can add
    the correct ones, but in the console the network adapters that I need to work with the information is grayed out and I can't change the information. 
    I am not an expert at Powershell. Below you can see a Logical Network and Sunets associated
    to a Network adapter. Can someone help figure out how to remove the information so I can assign the correct Logical Network?
    I woul so much appreciate this. I know there is a way to do this in
    PowerShell but I don't know Powershell that much. I
    am savoing all the
    powershell scripts ever time I configure something in SCVMM but I have had no luck trying to
    revearse what I did.
    Help Please
    Christopher
    Christopher Scannell

    This shows that an Uplink profile associated with this host, links to these logical networks. In order to remove this successfully, you must remove the logical switch and uplink deployed to the hosts.
    For a complete overview and guidance on the required configuration, have a look at the whitepaper we created. 
    http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • Logical network to physical network mapping (subnets and VLANS) in SCVMM 2012 R2

    In much of the blogs, documentation and literature on VMM, there are examples of deploying multiple logical networks onto one physical network i.e. Cluster (logical) + Storage (logical) + Backup (logical) + Live Migration (logical) + Management
    (logical) on top of Datacenter (physical).
    Does this mean it would be possible to have one (physical) flat VLAN-less network with one subnet and then have all those logical networks (with subnets and VLANs) on top of it? Even with a simple unmanaged L2 switch that doesn't support VLANs itself?
    If not, just how do you map multiple logical networks to just one physical network? How does that work in practice? Is a L3 switch needed to route traffic between logical networks for example?

    Hi. VMM Networking may be overwhelmed for the most, at first. But you really need to understand the modeling here and how things are related to each other. Especially if using NIC teaming in WS 2012 (and R2) together with this mix.
    I suggest that you read the following whitepaper where we explain how to setup networking in VMM (also to support network virtualization, but that is absolutely not mandatory): http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • How can i fix my iphone 3gs when i have network issues after updating to IOS 6.1.3 and avoid the connect to ITunes screen?

    Im an owner of an Iphone 3gs.
    When I updated my software to IOS 6.1.3 I started having network issues such as my phone would go on searching, it would search for signal and then No service after few minutes it would restart and when its on again it would show me Connect To Itunes screen, I tried connecting but nothing happens and if I just leave it as it is it will just keep on restarting and showing the same screen sometimes I might get lucky and the phone will start working again but No Service and if I turn on my 3G for the times Im outdoors it will just restart again so 3G is also another problem I have got. Today I decided to take it to an Apple Store, the guy restored it and now what happens is that it switches on and is showing me the connect to Itunes message but with black backround and i cant do anything it keeps on restarting and showing the same thing. Please if there is anyone that would like to spend some time with me to help me out, he would be more than Welcome.
    Im located in South Africa

    iOS: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • Kernel Build: kernel panic: VFS barf: Request for Assistance

    Good Morning, Been using Arch for about a year now. No issues. Love it. I am rebuilding a kernel, to my specs, soley for an educational experience. Stock Arch works peechee, but I need to learn more about linux's internals.  Read the wiki, browsed th

  • How to reset password if you can't boot from DVD?

    I just bought a second external disk drive and installed Leopard on it. When it asked me if I wanted to import my information from my internal drive, I said OK, not realizing that since I had a blank password on this drive (running 10.2.8), that woul

  • Updating JTable Column in real time

    Hello: I have a JTable which has listener listens for a specific event and updates the corresponding column accordingly in real time. This works fine. One small problems though, the user could actually see the redrawing of the JTable sometimes. Most

  • Maintenance order - Copy header long text in first operation.

    Hi gurus, I have the following requirement I dont know hoy to solve it. In our system, there is a certain maintenance order class for corrective operations. During creation, the short text in order header is transferred automatically to the first ope

  • Org structure IDs

    hello forum, how to delete, and enter new  ID of ORG structure, for eg: org structure MD is created , the system gives id no as 50000057 i want to change it to 50000035. so that my development and productions IDS are same. i need to have them same fo