Logical Network not showing up in Cloud Settings

In my SCVMM environment, I had the default Logical Network that gets added as soon as you add a cluster or host into it. Since, I wanted more Networks like DMZ Network and Networks based on Departments, I went ahead and created those in the Logical Network
and defined IP Pools in it so that When I provision a Virtual Machine through Windows Azure Pack, Users can be see all the Networks.
I am facing a problem when I try to add the Logical Networks in the Cloud. I am only seeing the default Logical Network and unable to see the Logical Networks that I created manually? What could be the reason? How can I troubleshoot it?

I don't know if they have been uploaded or matched. I did see the tracks on my phone of the new album I imported into my computer. So I think some syncing has ocurred. But there is no download button on my phone like there is for other tracks I have uploaded. All the tracks are greyed out and I can't play them on my phone? Any ideas?

Similar Messages

Why is the software update not showing up in general settings?

Why does my software update not show up in general settings?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV? Software is up to date, but SEC network not showing up as a channel. Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

the wifi router could also be blocking
and to really test if the windows firewall is the problem then try turning it off!
if that scare you too much then disable the internet modem / cable modem or the likes while you test
always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

"Network" not showing up

I have an iPhone 4 and when I go into settings>general, the Network tab is not showing up. It also says that I have a VPN, but will not show an APN. I downloaded the iPhone Config Utility, but I'm not sure what I need to do once I have that open to fix this problem. Is it even fixable? I just started using StraightTalk today and want to get all this figured out so I can have access to data. Any help would be MUCH appreciated!

There are two laptops already on the network and working. On the new laptop, when I go to sign on to the network, there is one named "linksys" on it but not "ralphsnetwork". When I put the wireless code in, I get "wireless code mismatch". The other two laptops show "ralphsnetwork" as the network they are connected to. Should the name of my network show up on the new laptop? Or is the one showing up named "linksys" actually my network. If it is, my wireless code will not work on it.

Apps have no access to photos and do not show up in privacy settings for me to change it!

Hey Everyone I really could use some help! Ok so I recently got sent a replacement iphone 4 in the mail. I backed up the old iphone 4 and transfered that information over to the new one NO PROBLEM. I downloaded my apps no problem either BUT here is my question. My apps such as facebook, twitter, and instagram do not have access to my photos. When i go to settings > privacy > photos NONE of the apps show up and they also dont show up under anything else in the privacy part like contacts for snapchat to use (which doesnt work either). My restrictions are enabled and my photos and everything else under there are selected to ALLOW changes. I have tried resetting the location and privacy as well and still the apps will not show up under privacy so I can give them access. Its very frustrating to not be able to use the apps. SOMEONE PLEASE HELP! Also i have tried deleting and reinstalling the apps that hasnt worked either

Make sure that you have Include Photos from Subfolders checked

Custom options in Adobe PDF printer are not showing up in "Default Settings"

Hello,
I am using Windows 7 and I am trying to create custom "Default Settings" in my Adobe PDF printer. When I make edits to an existing setting, click "Save As..." and save with a new filename, the new settings are not showing up in the "Default Settings" drop down box in the "Adobe PDF Settings" tab of the "Adobe PDF Document Properties" dialogue box. I can confirm that the new settings are indeed saved on my hard drive and are located in:
C:\Users\[Username]\AppData\Roaming\Adobe\Adobe PDF\Settings
No matter how many different custom settings I save as described above, they are simply now showing up. This works for me on other computers, but just happens not to work on my current one, which recently had an OS reinstall from scratch. Prior to the reinstall, it worked just fine on my computer (an ASUS UX31A laptop). The included pictures demonstrate what I'm talking about.
Any thoughts?

I finally solved this. The path for the Adobe PDF Settings was set to the follwing in the registry (HKEY_CURRENT_USER\Software\Adobe\PDF Settings):
C:\Users\%USERNAME%\AppData\Roaming\Adobe\Adobe PDF\Settings\
Even though "%USERNAME%" should work, it doesn't. I just replaced it with my actual username and it worked.

Adobe connect add in not showing up in Privacy Settings Mac OS X Yosemite

When I try to share a screen, I am told to click the ENABLE button. I'm taken to System Preferences where I navigate to the Privacy Settings, Accessibility, and I'm instructed to enable adobeconnectaddin. The problem is, adobeconnectaddin is not showing up in this window. I see Skype, which is not enabled, and that's all I see.
Any suggestions? Thanks in advance

As of March 9th, Mac OSX 10.10 will be supported.
Adobe wrote:
We are adding support for the following:
Client systems:
Mac OS X 10.10
Ubuntu 14.04
OpenSUSE 13.1
There isn't more information about what changes that means, but the release notes for 9.4 are here: Adobe Connect Help | Adobe Connect 9.4 Release Notes

Blackmagic Decklink card not showing up in Playback settings

Just upgraded to Premiere Pro CC - my Blackmagic Decklink card is not showing up in the Playback settings box.

Hi Peter - thanks for responding - yes I did install the latest drivers - but finally found a thread that solved the issue. Turns out Blackmagic installs the drivers in its own Adobe folder - but Adobe only wants to see them in its own special folder (Application Support>Common>Adobe). Once I moved everything from the one folder to the other, then Premiere could see the card just fine. They should be definitely look at a better way of dealing with this - so it doesn't become an emergency science project for people like me.
Anyway, case closed - for now. Thanks.

Other itunes on network not showing up in source

hello
we have a network of several macs. on each mac we have share i tunes set up but other peoples itunes not showing up in source.
can anyone help?
firewall port is checked for itunes, and itunes prefs say share my itunes. apple sharing is on. each computer can see each other and work in other "modes" for networking. n
not sure what the issue is.
any help appreciated.
tahnks
wayne

firewall port is checked for itunes, and itunes prefs say share my itunes. apple sharing is on. each computer can see each other and work in other "modes" for networking
Just a thought.
You did not mention 'Look for shared music'.
It's in Preferences>Sharing in iTunes.
M
Edit:
Here are the Knowledge Base articles about sharing music:
http://docs.info.apple.com/article.html?path=iTunesMac/5.0/en/695.html
http://docs.info.apple.com/article.html?path=iTunesMac/5.0/en/705.html
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)
Message was edited by: macmenno

Home network not showing up in Finder

My desktop PC is connected to my router by ethernet; MacBook Pro wireless. Due to a printing issue, I need to copy files from MacBook to PC to print. Sometimes, despite being on, PC does not show up under "Shared" in Finder. Is there a way in Snow Leopard of "seeing" which computers are currently attached to the home network?
Note - this is an intermittent problem; probably 2/3 of the time, the PC shows up no problem!

Open Terminal and issue the following command
ps aux | grep netbios[d]
if you get a line similar to this
_netbios 45 0,0 0,0 2477156 2456 ?? SNs 9:14am 0:02.44 /usr/sbin/netbiosd
then the daemon is running, otherwise issue the following command to start netbiosd permanently
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.netbiosd.plist

Movies not showing up in cloud

I have several movies such as The Hunger Games, Alien: The Director's Cut and some others that I purchased from iTunes. However, on my iPad they are not showing up as downloadable from the cloud and when I look on my computer, iTunes store also does not indicate that I have purchased them. They are on my computer so long as they don't get deleted I can play them from there but they don't show up on the cloud like other movies. Is there a way to fix this?

Is the computer you are trying to download them to authorized for the iTunes ID you used to purchase them? If not, open iTunes and go to Store>Authorize This Computer. (Note: a maximum of 5 computers can be authorized to download previous purchased from any given ID.) Then you should be able to download them from your Purchased list in iTunes, assuming they are still available in the iTunes store and the studio allows it. More details here: Download past purchases.

I have a new iPhone 6 Plus and Passbook does not show up in my settings. Clearly I messed up somehow in the settings. Any thoughts?

I recently purchased an iPhone 6 Plus and tried to set up Apple Pay. Passbook is not showing up in Settings. I clearly missed something vital in settings. Anyone else experience this?

Hi ..
Make sure your iOS version is correct.
Tap Settings > General > About then swipe down to Version. It must be 8.1.
If it's 8.1, instead of looking in Settings open the Passbook app itself.
If you can't find it, drag down from the top of any screen then type Passbook in the search field.
It should show up under: TOP HITS
"To set up Apple Pay on iPhone 6 or iPhone 6 Plus, open Passbook and follow the steps below." > Set up and use Apple Pay

Apps not showing in i cloud.

Hello my iCloud account is not showing the apps i had bought. What am i doing wrong please?

Welcome to the Apple community.
Any apps you purchase on your iOS device, will not show on your PC. This would be pointless, your PC cannot run these apps. Apps purchased from the App Store on your iPad can be re-downloaded at any time from the App Store, there is no need to back up Apps because of this. App data is backed up, but backups are either stored in the cloud or in iTunes on your PC. They will not show up in your iCloud Control Panel.

Why is LR not showing on creative cloud?

I have purchased and downloaded creative cloud however llightroom is not showing. How can I get lightroom on creative cloud?

I am with Thomas_Kennedy and the rest of you on this topic!! I pay $54 (that includes tax) a month for Adobe Creative Cloud even though I own Creative Suite /CS6 and I have been wondering the same thing!!
WHY... OH WHY... has Adobe NOT included Captivate in the Creative Cloud Suite????? I see that Premiere is now a feature, but NOT Captivate?? AND... there is a $29.00 charge to sign up to get Captivate Cloud... why is this separate??
I LOVE all of the features CC offers, but not having the eLearning tools is driving me nuts!! I am having to use other programs and brands when I would LOVE to use Adobe for everything I do. I have been asking this question from the VERY beginning when Creative Cloud was first launched and I hopped on board.
ADOBE.... are you listening to your loyal customers???? We are having to use other (less expensive) options.... wouldn't you rather us choose YOU over some other brand??? We are waiting....
Note to ADOBE: We have invested in you, now please invest in us and add a few extra features to Adobe Creative Cloud Suite!! Don't make us pay an extra 29.00 for ONE program...pretty please...

Networks not showing up in airport

My airport is on, but no networks are showing up. Just started to happen. Everything was fine until I installed an airport express. The airport express is on and working, but not showing up as a network too.
Any thoughts out there?
Thanks!

Same problem here. Although I'm using Leopard from a clean install. It says searching when i first click open the AP menu open, but then it just shows the network I'm on. Though once and awhile the other networks briefly show up too.....

Logical Network not showing up in Cloud Settings

Similar Messages

Maybe you are looking for