Logical "OR" with 2 counters

Hello,
i need to produce complex signal (attached as image), the signal is a logical "OR" operation of 2 pulse trains, are there any option in labview to produce such signals with PCI-6602 board?
Thanx!
Attachments:
logical-OR.jpg ‏28 KB

I believe you can do that using Buffered Pulse Train Generation. The X-Series User Manual talks about it on page 7-35 (the subsection on Continuous Buffered Implicit Pulse Train
Generation might be the most relevant to your application), and the example "Counter (Buffered) - Continous Output" from the LabVIEW example finder shows this as well.
Regards,
Ryan K.

Similar Messages

  • Cluster Disk Logical Disk Performance Counters Problem

    I have some problem with Oracle cluster. It's a two node Windows server 2008 R2 SP1 cluster with MS Failover cluster. I have SCOM 2012 SP1 with latest OS MP (agent running with local system rights). All other cluster are showing fine performance counters
    but this cluster does only show one cluster disk free space counters. It has 5 cluster disks (MBR formatted). Logical disk performance counters are running fine. So my questions:
    What performance counters does the new "Cluster Disk % and MB free space rule" use? Is it the same old Logical Disk performance counter that collects data for example for drive C:?
    What should I check from this cluster because performance view from my cluster groups are not showing all disks, just one and there are 5 cluster disks?
    Only one Cluster Disk is showing under performance view!
    Health Explorer from Cluster group shows all Cluster disks!

    We have this issue with normal Win server 2008 SQL servers. I can see disks at the Health Explorer view but no collection rules at the performance view. Rule does not have any overrides and it's enabled by default. We use the latest Core OS pack and Cluster
    MP. IS this ANOTHER bug in the MS management pack?

  • Jetstress 2013 found the following faulty logical disk performance counters

    I'm using Jetstress 2013 to test the storage disk subsystem for Exchange 2013. After the db build completed I click run test & got this error. I'm only getting this error on this VM. The other 3 VMs are fine. I also reformatted the disk & rebuild
    the db but got the same error. Anyone seen this before?
    Jetstress testing failed. Error: Jetstress found the following faulty logical disk performance counters: C:\jsdb\db4. Ensure that all logical disk performance counters are working correctly with System Monitor. Error: Instance 'C:\jsdb\db4' does not exist
    in the specified Category.

    As reinstalling the VM is not always possible, and the time to recreate the databases quite considerable, the actual answer to this issue is to find the path that the logical disk counters are using and then update the path to the databases in JetStress
    to match this.
    On your test machine open Performance Monitor and click the Performance Monitor node.
    Click the green + icon and select the "Logical Disk" row.
    In the Instances of selected object you will see the paths that the logical disk counter is using to find the databases. For example C:\ExchangeVolumes\ExVol1 and C:\ExchangeVolumes\ExVol2.
    Update the JetStress config to use these paths and not the paths that you might be using such as C:\ExchangeDatabases\DB01.db.
    The problem is due to the autoreseed scripts in the perf calculator mounting the C:\ExchangeVolume path first (and so that is the logical disk counters path) but the operator of JetStress using the more obvious C:\ExchangeDatabases path.
    There is an update to JetStress post the original date of this question that resolves this issue so you can use either path, but if you add disks to a server or recreate some of the disk arrays and not others you might find that JetStress needs to use C:\ExchangeVolumes\...
    to reach some databases and C:\ExchangeDatabases to reach the others.
    If you get the error in the original post for some of your databases and not all of them, then this is the fix and use Performance Monitor to see the paths needed and use only those in JetStress.
    Brian Reid C7 Solutions Ltd (www.c7solutions.com)

  • Logic 8 with Yamaha KX8 keyboard

    I'm running Logic 8 with a G5 Imac and I can't get the Logic template that ships with the Yamaha KX8 to work correctly. When I hit the transport buttons, I get notes instead of rewind, play, etc.
    I'm running Logic 8.0.2, and have all the latest KX8 drivers.
    Any ideas on what's wrong with this picture and how I can map these controls simply?

    Same thing with me and Logic 9. Funny that Level and pan + esc and choosing tracks seem to work but other buttons just give you notes.

  • Logical system with business service

    hi,
    can we have a logical system with business service just like we have with business system?? If yes,how can we create logical system for business service??
    Ratna.

    Hi,
    If you intend to use it with IDoc adapter it might be also necessary to set up corresponding Logical System (tcode: BD54) in adequate backed system.
    Refer conversion routine (logical system vs. service) in this presentation [Using the IDoc-Adapter|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b2b4035c-0d01-0010-31b5-c470d3236afd] - page no 6.
    Regards,
    Jakub

  • Digital outs in Logic Express with 828 or 002 rack

    Can someone tell me if it is possible to use the digital ins and outs of either my MOTU 828 or DIgi 002 rack with LE? It's no where as easy as Pro tools or DP!!

    Forgive my naivety... when you say "digital outs" are you talking about SPDIF? Does this mean I can't run Logic Express with an interface connected to the SPDIFs on my G5? Only Pro? Or am I off the mark?
    Thanks!

  • Logic Nope With G4 Mac Mini (Non-gigabet version)

    Does anyone know if that will work? One of the genius' at the apple store said I need gigabit and the only thing I could do was to buy a new Intel Core Duo Mac Mini. (Oh BTW, does anyone have predictions on when the Mac Mini will go core 2 duo) Does anyone know of any non-gigabit to gigabit converters out there? Thanks!
    Mac Mini   Mac OS X (10.4.8)  

    you can in theory run logic node with less than gigabit ethernet, but the word is that it's too slow to make it worthwhile.
    also, there's no such thing as a non-gigabit to gigabit ethernet converter. a datsun to porsche converter would be nice too.
    you can probably get a gigabit ethernet PCI card to add to a machine, but mac minis don't have PCI. honestly you're best off just getting a machine that has gigabit ethernet built in.

  • Call logical links with different enhancement sets on the same business role

    Hello,
    I am trying to create a business role that contain logical links with different enhancements. I know how to choose an enhancement for the business role but I can't find a way, if possible, that one business role does it.
    I know how to give an option to choose different roles for the same user, i'm looking for a way to do this in the same window
    Thanks,
    Noa

    does not matter anymore

  • How to create logical directories with same name on two databases

    Hi,
    OS: Windows
    Oracle Version : 10g
    I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
    Can't we create directories with same name but different path in two databases on one machine?
    Pls suggest me on this
    Regards,
    Vijay

    I am trying to create logical directory using CREATE
    DIRECTORY statement. I am very much aware that the
    create directory statement doesn't create directory
    on OS. But we can attach the physical directory on OS
    to logical directory in oracle
    My requirement is to create logical directories in
    oracle mapping the OS directories. Both the
    databases, wil have same logical directory names but
    different OS directory mappingsIf I understand you correctly, you can do this:
    On DB 1
    CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
    On DB 2
    CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
    What stops you from doing that ?
    Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

  • I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

    I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought  a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

    You're probably on OS X Lion?
    I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

  • Access data on multi-logical database with ad hoc query

    Dear all,
    I would like to know if it is possible to access data in multi-logical database with ad hoc query.
    I recall that I read some document stated that you can access data in multi-logical database with PNP as base.
    But I find no document about how to set it up, any comment?
    Regards
    Bill

    Hi Bill...
    PNP can be accessible..............
    PNP  0000-0999, 2000 to 2999 HR Master Data & Time 
    PCH.... I don't think so....
    Experts please do reply on this please...................
    Vijay
    Edited by: Vijay Shankar on Sep 13, 2011 11:32 AM

  • Create a logical column with more than one data source

    I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
    What I want to do is the union of 2 physical tables in one logical table.
    For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
    What I've tried is dragging the datasources I need onto the logical column.
    However this isn't working because it only retrieves the data from the first data source.

    Hi!
    I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
    I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
    Bye.
    Message was edited by:
    user578388

  • Business Logic Editor with Complex Transasctions

    I'm starting to have some serious problems using the Business Logic Editor with reasonably large (but by no means huge) transactions. These transactions also have nested transaction calls down a few layers. The main symptoms are:
    1)  When opening the Link Editor on the first action it is somewhat sluggish. Opening the Link Editor on the last action can take over 60 seconds.
    2)  If adding a new Transaction Call action, selecting the called transaction in the Configure window doesn't work. The transaction can be selected OK, but the browse window will not close. It has to be cancelled. The Link Editor does not show the transaction's input, even though the Configure window will now show the selected transaction's path OK.
    3)  If the transaction is Saved after 2), that transaction will not open again in the Logic Editor, even after a reboot.
    Memory seems to be part of the formula. The above is on a notebook with 1Gb of RAM. On a dual core with 2 Gb, the problems are less, but not much. On a server with 8Gb, the symptoms disappear.
    Does anyone know if there is a recommended minimum system config for using the Logic Editor?
    What is actually happening when a transaction with nested Transaction Call actions is loaded in the Editor and for exection? I have many transactions that don't have the above problems, but they take a long time to open in the Logic Editor, and up to 1.5 seconds to load when executing the transaction (this is as per the F5 timings).
    Thanks,
    Bill

    Rick,
    These days I'm very careful about large embedded reference docs in my transactions. I actually go through the .trx files with notebook looking for any large chunks of that sort of XML and make sure they are eliminated.
    In the case of this transaction, by the time I get to the actual SQL query action (and remember it's a few layers of nested transaction calls down), it can't run the query anyway. The Query Template name in the configure window is blank. That and any params are set dynamically in Links at run time (the Query Template name actually comes from a config file). If I try Limit Rowcount or Yes when I close the configure window, it just gives an error because it has no idea what query template to run.
    Given this, the problem just doesn't seem related to fetching data. And how would this cause the Links window to take so long to open in the Logic Editor?
    Bill

  • OBIEE 10g - Logical column with static value

    I created a logical column with static numeric value in it and added it to presentation layer. The column is not showing up in Answers. All other columns I added are showing up. The issue is with this one only.
    I have verified permissions on this column in presentation layer. I tried reloading server metadata in answers, restarting all services but it didn't help.
    One thing I noticed this column is showing fx icon instead of Σ icon.

    Kid,
    The fx means it is a calculated column/formula and the sigma means that you've added some aggregation type to the column.
    Either way it shouldn't matter and your column should be showing up.
    I would attempt to create a new column and in the fx field try entering static text and see if that allows the column to be visible after dragging it to the presentation layer subject area.
    Also what is the value that you are adding?

  • I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message ' not enough processor power.' I've tried freezing all tracks but this seems to have no effect. I've also bounced all soft synths to audio.

    I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
    I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
    even at the start of the track where there is nothing but a kick drum happening.......

    Thank you for the suggestions.
    I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
    Currently, I am using my Mac's "cheapo" internal audio hardware  (haha). I have a one year old 27-inch iMac,  a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
    I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
    https://discussions.apple.com/thread/2718054?start=0&tstart=0
    I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
    Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
    Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac.

  • You can't use this version of the application "logic pro" with this version of os x

    After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
    'you can't use this version of the application "logic pro" with this version of os x'

    Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
    P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

Maybe you are looking for