Logical path in lsmw
hi friends,
i have been uploading using the direct input method in lsmw.it is requiring the logical path and the logical file to be given.i tried to create them using the transaction FILE.but while using that in LSMW it is giving error stating that logical path doesn't point to the physical directory.can any how let me know how to create a logical file and logical path.
thanks in advance.
-senthilkumar
hi ,
goto the tcode file then u find the relation between the logical and physical paths ...and their assignment..
hope it will helps u..
regards,
venkat.
Similar Messages
-
Logical filename and logical path in lsmw
Hi all,
I am doing a lsmw for purchasing info record . i created a logicalpath and assigned a physical path to that . i created a logical filename and assigned the logical path .but when i assign that to the lsmw it is throwing error as 'LOGICAL PATH DOES NOT POINT TO PHYSICAL DIRECTORY' .
can anybody provide a solution for that .
Thanks & regards
Magesh anandanhi ,
goto the tcode file then u find the relation between the logical and physical paths ...and their assignment..
hope it will helps u..
regards,
venkat. -
LSMW: Error concerning the logical path in Specify Files step
Hi,
I am trying on an ECC 6.0 EHP6 system to upload (open) POs from an existing SAP ERP system. Since I faced some complications in batch input recording method, I decided to go with the standard batch/direct input method.
I selected object 0085 (Purchase Order) and method 0001 (Purchase Order). The program that is used is RM06EEI0. I followed all the usual steps, but in the "Specify Files" step I get the message:
'****.lsmw.conv' does not exist; edit the logical path using transaction FILE
Being aware of both the FILE and SF01 transactions, I created the logical path and file (through the FILE transaction). However, after the modification, I get the message:
Logical file '****' is not assigned to physical file '****.lsmw.conv'
There is also the related SAP Note 753511 (Logical and physical path and file name in transaction LSMW) that refers to this case.Hi,
Click on specify file radio button>Legacy data-on the PC Front end
where input file location like C:\mydocument\desktop\test.txt
and give input in Name field: mydocument
in delimiter section > select Tabular
File structure section> tick on Field order matches source structure definition
File type: Record end marker(Text file)
then press enter key and other steps as same.
Second thing you said that you have used Batch input recording
after creation and recording finish , scroll the page below on recording and put a cursor unwanted field and remove unwanted input field.
I hope your problem will resolve. you can find the steps pdf on Google search try now.
Thanks
Sanjeet Kumar -
LSMW - No logical path specified
Hi Experts,
Am developing a Project to upload the data, so, am using spread sheet from my C drive..........but, am getting the following error,
No logical path specified
Message no. /SAPDMC/LSMW_OBJ_060046
So, pls, let me know that,
1 - How to fix it?
2 - Why its throwing?
thanqIn the "Specify files" step, you see following 3 nodes: Legacy Data, Read Data & Concerted data.
Double click on Converted data where you get a popup & you need to mention the logical path & Logical file name. ( Normally LSMW will be the logical path & specify the same path as presentation server path / File.
If you do not have a logical path - LSMW, create one with tx: FILE.
Regards. -
LSMW No logical path has been specified
Dear All,
I am trying to create characteristic through LSMW. in the Specify file step i am geeing this error"No logical path has been specified".
Any body can have idea about the error?
Regards
DhirenHi Dhiren,
I have the same problem. I am trying to change a batch characteristics and I am getting the same error.
Could you please share how you resolved your issue?
Regards,
R.S
This is a old and answered thread - please open a thread for your specific query.
-Paul
Moderator
Edited by: Paul Meehan on Aug 25, 2011 11:39 AM -
LSMW-logical path not specified
Hi experts,
I am doing an LSMW object for purchasing info records conversion.
In the step "specify files" i am not able to save wat i have done cos i am getting an error 'No logical path has been specified' .I have choosed the file from PC-Frontend. Due to this problem am not able to go ahead with further steps.
please help.
Thanks,
NeelaHi
Have u followed all the steps perfectly while creating a lsmw ???
There are 14 steps that are normally used and these are :
1) Maintain Object Attributes.
2) Maintain Source Structures.
3) Maintain Source Fields.
4) Maintain Structure Relations
5) Maintain Field Mapping and conversion rules .
6) Maintain Fixed Values,translations ,user defined routines.
7) Specify Files .
8) Assign Files .
9) Read DATA.
10) Display Read Data.
11) Convert Data.
12) Display Converted Data.
13) Create Batch Input Session.
14) Run Batch Input Sesion.
Check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc -
Regards
Pavan -
LSMW LOGICAL PATH not set error
Hi,
when i save an lsmw the error is coming as logical path not set. I guess this is for the CONV and READ files. Can ne one tell where can we speicfy this path. Right now we have to manually store the paths for these. Where in the settings can we defualt this path for these files.Check the Specify Files Step:
Files
Legacy Data On the PC (Frontend)
Input File D:\Documents and Settings\file4.txt
Data for One Source Structure (Table)
Separator Tabulator
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data /usr/sap/tmp/ZHR.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data /usr/sap/tmp/ZHR.lsmw.conv
Wildcard Value Value for Wildcard '*' in File Name -
I am working on creating LSMW - sample conversion for PIR. I struck up in the u201CSpecify filesu201D step by creating Logical Path.
Step 1 : I have done it thru T.Code : FILE in that first by creating Logical File path.
Step 2 : Assignment of Physical Paths to Logical Path
I have maintained Syntax Group as WINDOWS NT and given the Physical path as C:\TEMP\<FILENAME>
Step 3 : Logical File Name Definition , Cross Client
I have maintained Logical File, Name, Physical File , Data Format ,App Area , Logical Path.
After maintaining I am getting the error message u201C LOGICAL PATH PUR_INFO_RECORD DOES NOT EXISTu201D.
Please help me out to solve this issue.
Thanks & Regards,
Manispecific to LSMW there is OSS note 753511 that describes what to do.
If you have authority for x-client customizing then you can directly type a name for logical path and file name
e.g. LSMWLOGPATH and LSMWLOGFILE, hit enter and LSMW will create the logical path and file name for you.and you dont need to do it with transaction FILE.
Go into the step "Specify files".
place cursor onto line "converted data"
click change button.
you get a pop-up with the logical path.
Just hit enter and LSMW will create the path itself. -
LSMW - Logical Path/File - No logical path has been specified
Hello,
I am trying to create a LSMW with the RM06EEI0 direct input program for ME21N transaction.
At the SpecifyFiles step I get the error message "No logical path has been specified".
My dilemmas are:
1. How can I solve this error? Is the FILE transaction only solution? If yes, where and how I must define the logical path/file?
2. Why in the case of the Batch Input Recording LSMW Method this files are created automatically? (I can see them in the AL11 transaction and I didn't define them by myself).
3. Why on other system this error is just an warning message? If you look at this tutorial http://****************/Tutorials/LSMW/PO/Page4.htm at Step7.g. you can see that there is no need of defining the file/path in FILE transaction.
More info about the system I am working in:
SAP ECC 6.0.
LSMW 4.0.0. Version.
Thank you.
DanielaHi
Refer the oss note 753511 released for this kind of error you face in LSMW, I am pasting the content of the note below,
******************Note Content,
Symptom
The system issues an error message for the logical path or file when you perform the "Specify files" step in the Legacy System Migration Workbench (transaction LSMW) although you have made the correct assignment in transaction FILE.
The error messages are as follows:
The logical path <PATH> does not point to the physical directory.
The logical file <FILE> is not assigned to the physical file.
or
A logical path was not specified.
Other terms
Logical path, logical file, transaction FILE, LSM Workbench
Reason and Prerequisites
Some import interfaces that you can also use with transaction LSMW work with logical path and file names.
Transaction LSMW itself, however, works with physical file names. To be able to transfer the LSMW file with the converted data to the import program, you must specify a logical file name for the file with the converted data in addition to the physical file name. In this case, the system displays additional fields in the 'Specify files' step in which you must enter the logical path and file name.
Solution
The error messages may be due to several causes. Check the following:
Have you maintained the logical path and logical file name and have you assigned them to the physical file specified in the "File" input field of transaction LSMW?
These settings are maintained in transaction FILE.
When you use logical file and path names, you must specify the name of the physical file with its path. If you have not specified any directory, you cannot assign any directory to the logical path in transaction FILE. In this case, the system uses the SAP Home directory on the application server by default. Bear in mind that the file name must not exceed the maximum length of 45 characters, including the path.
Up to LSMW version 1.7.2 (*):
If the logical file name specified does not point to the physical file (although it should do), the system adjusts the logical file name, that is, the information in transaction FILE is changed to the entries made in transaction LSMW. This may lead to unwanted side effects if the logical file is also used somewhere else. Therefore, SAP recommend that you always use separate logical paths and file names for transaction LSMW (the problem is corrected as of LSMW version 1.8.0, see below). If the logical file does not exist yet, it will be created upon request.
As of LSMW version 1.8.0 (*):
The settings of the logical file are checked but no longer adjusted automatically as in version 1.7.2 (see above). If there are inconsistencies, the system issues an error message. If the user is authorized to maintain logical paths and file names (as for transaction FILE: "Maintenance authorization for cross-client tables"), transaction LSMW can create the logical path, the file name and the file. Due to this automatic generation, the user no longer needs to make adjustments in transaction FILE. Therefore, we especially recommend this procedure.
To display the version of transaction LSMW, select "Extras" --> "Display LSMW version" in the main menu of the initial screen.
You should also bear in mind that as of Basis Release 6.20, that is, as of LSMW version 4.0, transaction LSMW is no longer an add-on but is delivered with the standard system.
Hope this helps,
Sunil -
I am working on creating LSMW - sample conversion for PIR i struck up in the u201CSpecify filesu201D step by creating Logical Path.
Step 1 : I have done it thru T.Code : FILE in that first by creating Logical File path.
Step 2 : Assignment of Physical Paths to Logical Path
I have maintained Syntax Group as WINDOWS NT and given the Physical path as C:\TEMP\<FILENAME>
Step 3 : Logical File Name Definition , Cross Client
I have maintained Logical File, Name, Physical File , Data Format ,App Area , Logical Path.
After maintaining I am getting the error message u201C LOGICAL PATH PUR_INFO_RECORD DOES NOT EXISTu201D.
Please help me out to solve this issue.
Thanks & Regards,
ManiSolved the issue
-
Why does it show "No logical path has been specified" in LSMW
When I specify files in LSMW, save, the systems always shows "No logical path has been specified". I heard it need to config logical path in 'File', but I don't know how to cofig it? Any people can tell me? Thanks a lot!
Hi,
This path of the file names is in the following format:
Projectname_Subprojectname_Objectname.lsmw.read
Projectname_Subprojectname_Objectname.lsmw.conv
You can change this path manually in the following way
click on imported data or converted data
clickon change entery button (Ctrl + F8)
you will find this path in edit mode.
here you can adjust it's length by removing some words from the project,subproject,object name.
Regards,
Amol -
LSMW by BI : Unable to specify file in step 7; logical Path not assigned
Hi,
I'm trying to uplaod HR DATA using object 0555 and method 0000 for Program RPDUSTD00 using LSMW Batch Input Method.
In step 7 when i specify file which tab delimited text file at front end pc(at my pc) let say c:\test.txt and save I got error message 'Logical path not assigned'.
Please suggest what I'm missing and what i need to do to get it correct.
Thanks,
Anshuman.Hi,
There are other files specified in the screen for imported and converted data. These files must be accessible on SAP application server. If the logical file names are not created use physical ones lik /tmp/blabla.lsmw.read etc.
Make sure you use different files for different objects.
Kind regards
Michael -
LSMW : Unable to Specify Files . Logical path incorrect ?
Hi Guys,
I am trying to upload Goods movement Using the Standard LSMW 0110 program RM07MMBL.
When I try to execute the step Specify Files ,system displays an error message "No Logical Path specified."
The Source File is in my Local PC .
When I click the Converted Data File in the Specify files list
I get a popup which asks me for a Logical path and a Logical File and both these parameters a mandatory.
I tried to maintain the parameters and entries in transaction FILE also.
But it says 'logical path not assigned to the physical directory.'
What is the correct method for this.
What steps should I follow ..
Pls advice
Message was edited by: hao fuHi,
Refer the oss note 753511 released for this kind of error you face in LSMW, I am pasting the content of the note below,
******************Note Content,
Symptom
The system issues an error message for the logical path or file when you perform the "Specify files" step in the Legacy System Migration Workbench (transaction LSMW) although you have made the correct assignment in transaction FILE.
The error messages are as follows:
The logical path <PATH> does not point to the physical directory.
The logical file <FILE> is not assigned to the physical file.
or
A logical path was not specified.
Other terms
Logical path, logical file, transaction FILE, LSM Workbench
Reason and Prerequisites
Some import interfaces that you can also use with transaction LSMW work with logical path and file names.
Transaction LSMW itself, however, works with physical file names. To be able to transfer the LSMW file with the converted data to the import program, you must specify a logical file name for the file with the converted data in addition to the physical file name. In this case, the system displays additional fields in the 'Specify files' step in which you must enter the logical path and file name.
Solution
The error messages may be due to several causes. Check the following:
Have you maintained the logical path and logical file name and have you assigned them to the physical file specified in the "File" input field of transaction LSMW?
These settings are maintained in transaction FILE.
When you use logical file and path names, you must specify the name of the physical file with its path. If you have not specified any directory, you cannot assign any directory to the logical path in transaction FILE. In this case, the system uses the SAP Home directory on the application server by default. Bear in mind that the file name must not exceed the maximum length of 45 characters, including the path.
Up to LSMW version 1.7.2 (*):
If the logical file name specified does not point to the physical file (although it should do), the system adjusts the logical file name, that is, the information in transaction FILE is changed to the entries made in transaction LSMW. This may lead to unwanted side effects if the logical file is also used somewhere else. Therefore, SAP recommend that you always use separate logical paths and file names for transaction LSMW (the problem is corrected as of LSMW version 1.8.0, see below). If the logical file does not exist yet, it will be created upon request.
As of LSMW version 1.8.0 (*):
The settings of the logical file are checked but no longer adjusted automatically as in version 1.7.2 (see above). If there are inconsistencies, the system issues an error message. If the user is authorized to maintain logical paths and file names (as for transaction FILE: "Maintenance authorization for cross-client tables"), transaction LSMW can create the logical path, the file name and the file. Due to this automatic generation, the user no longer needs to make adjustments in transaction FILE. Therefore, we especially recommend this procedure.
To display the version of transaction LSMW, select "Extras" --> "Display LSMW version" in the main menu of the initial screen.
You should also bear in mind that as of Basis Release 6.20, that is, as of LSMW version 4.0, transaction LSMW is no longer an add-on but is delivered with the standard system.
Hope this helps,
Rgds, -
LSMW -Specify files -No logical path specified
HI,
While i specify a file in lsmw in specify files from pc front end in legacy data and i try to save. It says " no logical path specified " in the message bar.
kindly help me in this issue.
i am unable to go further as I cant specify files.
Thank in advanceHi Srivasta
You just put any, not used logical file name in your file definition step. LSMW will create this logical file byself und will use when is needed, but you just forget about it in future. Don't forget to recreate this file, when you move your LSMW to test and production systems, it is not created automaticaly there.
The way you enter logical path and logical name is,
Within the LSMW option 'Specify Files', Double click on
'Converted Data' and a popup box will allow you enter
file name , logical path and logical file.
cheers
Sameer -
LSMW accept file from logical path?
Dear All,
Can LSMW designs for conversions accept file from logical path?
The requirement is during actual conversion execution -the conversion team can store files anywhere they want, configure logical file names/paths and use our LSMWs without needing program modifications.
Kindly let me know.
Thanks in Advance
RanjanHai KCR
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:\material_data.txt"
description : -
separators as select comma radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
select the Program
select continue button
go with via physical file
give the lock mode as 'E'
and execute
Thanks & regards
Sreenivasulu P
Maybe you are looking for
-
Need help sharing photos.
Any attempt to share photos via photo mail or email attachment through share menu causes Elements 12 to crash.
-
Error when raise crs on one node
rac with three-node,linux redhat as 5+10.2.0.4 on rac01: [root@rac01 bin]# *./crsctl stop crs* Stopping resources. This could take several minutes. Error while stopping resources. Possible cause: CRSD is down. [root@rac01 bin]# *./crsctl check css* F
-
If anyone can do this for me they will get the 10 duke points plus I will post another message with that persons name in the description and when they reply I will give them another ten. Please please help!!!!!! I have a question which I am so stuck
-
Can I backup FRA to tape (Networker) without NMO?
Can I just use MML that Networker provides and not use their Networker Module for Oracle? So I will backup up my databases to FRA and then Networker will back up FRA via SBT_TAPE? If so, how do I unlink NMO and just leave MML? Or is the only way to u
-
Deploying Presenter 8 on 64bit Win7 with 32bit Office
As stated above, my scenario is that we have a site license for Presenter and I need to be able to deploy to hundreds of machines. I'm no beginner to the AAMEE tool as I've used it to deploy Master Collection and other suites over the years. So far I