Logical standby database problem

i have setup logical standby database on my pc . Everything was working fine . Logs were applied.
But i tried testing few things on standby and issued few commands on that.
After that the logs were not applied. i tried to restart that also dint work.
what should i do so that things r back to normal or i need to create the standby again .
Thanks

The output is as follows .
SQL> SELECT APPLIED_SCN, NEWEST_SCN, READ_SCN, NEWEST_SCN-APPLIED_SCN FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN NEWEST_SCN READ_SCN NEWEST_SCN-APPLIED_SCN
179493 194423 179497 14930
SQL> SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
no rows selected
SQL> select operation, options, object_name, cost
2 from v$sql_plan, v$session, v$logstdby
3 where v$sql_plan.hash_value = v$session.sql_hash_value
4 and v$session.serial# = v$logstdby.serial#
5 and v$logstdby.status_code=16113;
no rows selected

Similar Messages

Problem building logical standby database

Hi all,
i am trying to build a logical standby database on platform Sun OS 10/Oracle 10gR2. I am following the Oracle document http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ls.htm#BEIGHEIA
I have created a physical standby database and converting it to a logical standby database. I ensured that my physical Standby is in Sync with primary.
Procedure DBMS_LOGSTDBY.BUILD executes successfully on primary.
The problem is that the command *'alter database recover to logical standby test;'* DOESN'T END. No error in archive log. I have identified the archived redo log that contains the LogMiner dictionary and the starting SCN and applied that archive log on standby. Still the the above command doesn't end.
Any Help is appreciated.

SQL> alter database recover to logical standby m2test;
This command doesn't return an sql> prompt. Alert log says it is waiting for log sequence 25. The command is running is for more than 5 hours, but still not competed.
Alertlog:
Thu Feb 5 22:14:25 2009
alter database recover to logical standby m2test
Thu Feb 5 22:14:25 2009
Media Recovery Start: Managed Standby Recovery (mtest)
Thu Feb 5 22:14:25 2009
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 2 processes
Media Recovery Waiting for thread 1 sequence 25
Document says :-
If a dictionary build is not successfully performed on the primary database, this command will never complete.
But the dictionary build on primary is successful.
SQL> execute dbms_logstdby.build;
PL/SQL procedure successfully completed.
I used the following queries and to find which archive log contains dictionary build and made sure that the log archive sequence 22 is applied on standby.
SQL> SELECT NAME FROM V$ARCHIVED_LOG
WHERE (SEQUENCE#=(SELECT MAX(SEQUENCE#)
FROM V$ARCHIVED_LOG
WHERE DICTIONARY_BEGIN = 'YES' AND STANDBY_DEST='NO')); 2 3 4
NAME
/oradata/mtest/archive/mtest_1_22_677975686.arc
SQL> SELECT MAX(FIRST_CHANGE#) FROM V$ARCHIVED_LOG
WHERE DICTIONARY_BEGIN='YES'; 2
MAX(FIRST_CHANGE#)
177407
SQL>
Edited by: user592715 on Feb 6, 2009 3:22 PM

RMAN script problem to create logical standby database !

Dear Friends ,
I am using Oracle10g database . I want to create a logical standby database . I create two database :
Primary : orcl
standby : orclsby1
Every steps I followed successfully , but when I am going to create "standby database" from "primary database" using rman then I found the following error :
The script is below which I have to run in Primary (orcl) database :
Script :
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'orcl','orclsby1'
set db_unique_name='orclsby1'
set db_file_name_convert='/orcl/','/orclsby1/'
set log_file_name_convert='/orcl/','/orclsby1/'
set control_files='/u01/app/oracle/oradata/orclsby1.ctl'
set log_archive_max_processes='5'
set fal_client='orclsby1'
set fal_server='orcl'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(orcl,orclsby1)'
set log_archive_dest_1='service=orcl ASYNC
valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orcl'
Problem which I got :
[oracle@localhost DG]$ rman target sys/sys123@orcl auxiliary sys/sys123@orclsby1
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Oct 19 15:58:17 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1227832857)
connected to auxiliary database: ORCLSBY1 (not mounted)
RMAN> @cr_phys_sby1.txt
RMAN> run {
2> allocate channel prmy1 type disk;
3> allocate channel prmy2 type disk;
4> allocate channel prmy3 type disk;
5> allocate channel prmy4 type disk;
6> allocate auxiliary channel stby type disk;
7> duplicate target database for standby from
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "from": expecting one of: "dorecover, db_file_name_convert, nofilenamecheck, ;"
RMAN-01007: at line 7 column 39 file: cr_phys_sby1.txt
I try to edit the above script using 'nofilenamecheck' 'dorecover' etc. , but cannot resolve the problem . Would u plz help me .... where the problem is .
Both databases are running on Oracle10g platform .
Waiting for ur kind reply .. ...

You need to:
- create a SPFILE manually for standby database
- use the RMAN command: DUPLICATE TARGET DATABASE FOR STANDBY
- remove all SPFILE statements from RMAN script.

Problem while mining archivelog in Logical Standby Database

I have configure Data Guard with one Primary database, one physical standby and one logical standby database; redo are applied correcly on the physical standby database but on the logical standby database when logminer begin mining logfile it encounter this errors :
ORA-00600 internal error code, arguments : [kpotcgah-7],[64],[X4],[],[],[],[],[]
ORA-12801 error signaled in parallel query server P003
ORA-07445
ORA-12805 parallel query server died unexpectedly

Unfortunately ORA-00600 errors are beyond the scope ot this forum, as they require tools and source code available only at Oracle Support. The only directions you most probably will get here is to issue a Service Request. Oracle support will, among other things, ask you if you are at the latest available patch for your platform.
Good luck.

Dataguard Problem(logical standby database)

Hi,
I have successfully created logical standby database, and everything is working fine, all of the SQL is applying and archiving is also shipping.
Until I create a new tablespace for e.g. pay in the primary database, and suddenly SQL applying is stopped, but the archive is shipping.
I am using Windows XP SP2 and Oracle 10gRel2.
The contents of AlertLog file are as
Wed Jul 23 22:52:19 2008
Thread 1 cannot allocate new log, sequence 133
Checkpoint not complete
Current log# 3 seq# 132 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO03.LOG
Wed Jul 23 22:52:23 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:52:23 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:52:23 2008
Thread 1 advanced to log sequence 133 (LGWR switch)
Current log# 1 seq# 133 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO01.LOG
Thread 1 cannot allocate new log, sequence 134
Checkpoint not complete
Current log# 1 seq# 133 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO01.LOG
Wed Jul 23 22:52:29 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:52:29 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:52:29 2008
Thread 1 advanced to log sequence 134 (LGWR switch)
Current log# 2 seq# 134 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO02.LOG
Wed Jul 23 22:55:49 2008
Thread 1 cannot allocate new log, sequence 135
Checkpoint not complete
Current log# 2 seq# 134 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO02.LOG
Wed Jul 23 22:55:54 2008
Destination LOG_ARCHIVE_DEST_2 is SYNCHRONIZED
Wed Jul 23 22:55:54 2008
Destination LOG_ARCHIVE_DEST_2 no longer supports SYNCHRONIZATION
Wed Jul 23 22:55:54 2008
Thread 1 advanced to log sequence 135 (LGWR switch)
Current log# 3 seq# 135 mem# 0: C:\ORACLE\PRODUCT\10.2.0\ORADATA\IMRAN\REDO03.LOG
When i use this command, the SQL Apply starts again but the tablespace is not created on Logical standby database.
kindly give me a solution.
Thanks in advanced.

In Standy database also you need to add TB details for it to recognise Primary DB new TB .
try adding it and retry your operation .

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Logical Standby Database and XMLDB

I couldn't find a proper group to post this message and thought I would try here.
I want to set up a Logical Standby Database for our production database server 9.2.0.4.0 with XMLDB. I am having problem with some system tables that were created when I registered some XML schemas.
These tables are in the standby database but Oracle complains the object does not exist.
Any idea?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Logical standby database to physical standby database

I already start my logical standby database and I want to return it again to physical standby database. So what should I do?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Logical Standby Database with 10g+ASM on both sides??

Hi out there,
is there a known way to establish a logical standby database on 10g, if both
sides are running with an ASM setup?
I've tried to create one out of a physical standby database (which is set up
and running w/o any problems), like a book suggested me to do.
The procedure was:
1. switch on supplemental logging
2. prepare initiation parameters (for archive logging etc.) on both sides for
logical stb.
3. shut down the phyiscal standby
4. alter database create logical standby controlfile as '<path>'; on the
primary, transfer the controlfile to the standby db. Here I had to use RMAN
to copy the controlfile into the ASM System, and modify the initfile/spfile
in order to use the controlfile. No problem so far.
5. mount the standby database, alter database recover managed standby database
disconnect; -> At this point, the alert log complained about non-available
datafiles.
6. alter database activate standby database; --> fails ("needs recovery") due
to last point.
The trouble is, the controlfile created at point 4 cointains wrong paths to
the datafiles. Since I can not have the same disk group name on the standby
system, and since ASM renames the stored datafiles by its own, the complaints
of point 5 are comprehensible, but nevertheless annoying.
I tried to backup a controlfile to trace and change the paths, but at after
mounting the standby with this controlfile and proceeding at point 5, the
system says "<path> is not a standby controlfile"
Is there a different way of creating a "Logical Standby Database with 10g+ASM
on both sides"? Metalink said nothing about LogStby and ASM.
Best regards and thanks in advance,
Martin

I'm not sure if this will work but try:
1. create trace control file (you did it)
2. change paths (you did it)
3. recrate control file (you did it)
... there was error occured during mount before
so mount database (not as standby)
4. create standby control file (from recreated control file)
5. shutdown instance, replace control file with new standby control file or replace the control filename in parameter file.
6. mount as standby
What happend?
Update: Tested on my side and it has worked fine... How about you?
Message was edited by:
Ivan Kartik

Materialized View Logs in a logical standby database

I am trying to create materialized views based on a few tables in a logical standby database.
The target database (11g R2) where the MVs will be created is a stand-alone database.
The DB where the base tables reside is a logical standby database (11g R2).
The requirement is to do a "FAST REFRESH" of the Materialized Views.
My questions are :
1. Can I create MV logs in the logical standby DB?
2. If the answer to question no. 1 is "Yes", do I need to do anything different or configure the logical standby DB in a specific manner in order to create MV logs. From what I understand, the objects in the logical standby database are in a locked state. Is that going to be a problem ?
Any other information that might be relevant is greatly appreciated.
Thanks in advance.

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Creating triggers in a logical standby database

Does anyone know if its possible to create and enable a trigger in a logical standby database on a 'guarded' table? I've been able to create the trigger (as an after insert trigger) and it appears to be valid but it never seems to fire, despite inserts taking place. Are there any other steps involved to activate this, or is it just plain not possible in a logical standby? My primary and logical standby databases are 10.2.0.3

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Add Datafile in Logical Standby Database

Hi,
I have add one datafile in our primary RAC DB. We had logical standby database with file management is equal to manual. Both the primary RAC and logical standby db have the different storage structure. When the archive applied on the logical standby database its throws the error " error in creating datafile 'path'";
Would appreciate if come to know the steps to add the datafile in this kind of environment. and how can i overcome from this problem now except skip transaction for that ddl.
Thanks in advance.
Dewan

When the archive applied on the logical standby database its throws the error " error in creating datafile 'path'";Can you post the error message with the number.
From Manual..
8.3.1.2 Adding a Tablespace and a Datafile When STANDBY_FILE_MANAGEMENT Is Set to MANUAL
The following example shows the steps required to add a new datafile to the primary and standby database when the STANDBY_FILE_MANAGEMENT initialization parameter is set to MANUAL. You must set the STANDBY_FILE_MANAGEMENT initialization parameter to MANUAL when the standby datafiles reside on raw devices.
Add a new tablespace to the primary database:
SQL> CREATE TABLESPACE new_ts DATAFILE '/disk1/oracle/oradata/payroll/t_db2.dbf'
2> SIZE 1m AUTOEXTEND ON MAXSIZE UNLIMITED;
Verify the new datafile was added to the primary database:
SQL> SELECT NAME FROM V$DATAFILE;
NAME
/disk1/oracle/oradata/payroll/t_db1.dbf
/disk1/oracle/oradata/payroll/t_db2.dbf
Perform the following steps to copy the tablespace to a remote standby location:
Place the new tablespace offline:
SQL> ALTER TABLESPACE new_ts OFFLINE;
Copy the new tablespace to a local temporary location using an operating system utility copy command. Copying the files to a temporary location will reduce the amount of time the tablespace must remain offline. The following example copies the tablespace using the UNIX cp command:
% cp /disk1/oracle/oradata/payroll/t_db2.dbf
/disk1/oracle/oradata/payroll/s2t_db2.dbf
Place the new tablespace back online:
SQL> ALTER TABLESPACE new_ts ONLINE;
Copy the local copy of the tablespace to a remote standby location using an operating system utility command. The following example uses the UNIX rcp command:
%rcp /disk1/oracle/oradata/payroll/s2t_db2.dbf standby_location
Archive the current online redo log file on the primary database so it will get transmitted to the standby database:
SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
Use the following query to make sure that Redo Apply is running. If the MRP or MRP0 process is returned, Redo Apply is being performed.
SQL> SELECT PROCESS, STATUS FROM V$MANAGED_STANDBY;
Verify the datafile was added to the standby database after the archived redo log file was applied to the standby database:
SQL> SELECT NAME FROM V$DATAFILE;
NAME
/disk1/oracle/oradata/payroll/s2t_db1.dbf
/disk1/oracle/oradata/payroll/s2t_db2.dbf

Updating tables in logical standby database

Dear DBAs,
Is it possible to update non replicated tables in the logical standby database, but have the same schema name?
"Alter session disable guard" works only for the current session, in fact i want it for all connected users whithout stopping the standby apply ?

hi,
Let's say in the primary database i have 10 tables, and using the RMAN i have created a Ph. standby database and then converted to a logical.
so now i have the same schema and the same tables in these servers.
the fact of using logical stdby is to be able to make DML transactions.
so the issue is that from the 10 tables i need 9 tables to be replicated and the last one will not be replicated, so the application connected to the log. stdby will use only this table to update the user record(login date, logout date...bla bla bla).
the problem is that when the user will connect to the database the application will insert a record like "insert into SCHEMANAME.tablename....."
the problem is that the schema name is added into the insert statement.
Thank you in advance

Slow SQL Apply on Logical Standby Database in Oracle10g

Hi,
We are using Oracle 10g Logical Standby database in our production farm but whenever there is bulk data load (5-6 GB data) on the primary database, the logical standby seems to be hung. It takes days to apply the 5-6 GB data on the logical standby.
Can anybody give me some pointers how can I make my SQL Apply fast on the logical standby for bulk data.
Thanks
Amit

Hi there,
I've a similar problem. I did an insert of 700k on a table. It takes me over 1 1/2 hours to see the data. Notice, I increased the "max_sga" to 300m and "max_servers" to 25" and didn't help the performance at all.
My version is 10.2.0.3 with the patch 6081550.
APPLIED_SCN APPLIED_TIME RESTART_SCN RESTART_TIME LATEST_SCN LATEST_TIME MINING_SCN MINING_TIME
1015618 29-NOV-2007 18:28:51 1009600 29-NOV-2007 18:28:51 1017519 29-NOV-2007 19:54:07 1015656 29-NOV-2007 18:32:14

Creating standby or logical standby database manually?

Hi,
I have to create 4 logical standby databases on a Linux Red Hat 64-bits server.
The primary databases reside on another Linux Red Hat 64-bits server.
The oracle database version is 10.2.0.3.
The question is as follows:
Should I create the logical standby databases manually or should I do it with the Oracle EM Grid Control?
I have read that the creation of standby databases with the Grid Control is very straightforward, but I really want to read of some of your experiences.
I have read that there are some problems in Grid Control with the test of Failover and Switchover.
Please advice.

Hi,
It all depends.
I assume you don't backup your database to tape using RMAN.
Do you backup your database to disk using RMAN?
You would need to set up NFS links from your standby server to the primary server.
For this purpose, in 9i, I made sure my disk backup ended up in <directory>/backup/<nodename>, so I could easily set up a NFS link.
If you do it manually, you need to have made a full database RMAN backup first.
Probably Grid Control is taking care of this for you.
I have done it once using database control in 10g. It is really simple, and you just have to click a few buttons and sit back.
Doing it manually is slightly more work: you need to make sure parameters are correct and you need to write a (generic) script of less than 10 lines.
You probably do have more control over it, though RMAN's duplicate database command is robust and can be restarted easily.
I can't answer your last remark.
Hth
Sybrand Bakker
Senior Oracle DBA

Logical standby database problem

Similar Messages

Maybe you are looking for