Logical symbols in pages for IPad? Asking for help

I have a new IPad and I would like to define logical symbols on my keyboard (just like ą, ę and so on). Is there some way to do it and to use it in PAGES for IPad? I would prefer to have few math symbols defined directly under some bottoms and not to use copy/paste. (I tried to find in Pages for IPad some special characters, but there are no such things, perhaps it is possible to add it?) I have also small separated keybord (perhaps this could be somehow used...?)

Afraid you cannot define custom characters for any keyboard in the iPad. What accented characters there are can be shown by holding the appropriate letter down.

Similar Messages

  • My IPad asks for updating. When I try shows me it cannot be installed be cause its requires at least 1.9 Gb available.

    My IPad asks for updating. When I try shows me it cannot be installed be cause its requires at least 1.9 Gb available.

    See the following page:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Scroll down to the "Update your device using iTunes" section.

  • Lock my iPad asking for PUk code I have no idea what is that

    Need help locked my iPad asking for PUK code to unlock and I have no idea

    I don't think you can, you could try to email apple about the problem or depending on what you mean by "info" if it is just apps you can re download them again once you restore it.

  • IPAD asking for a passcode. I don't have one.

    Ipad asking for passcode. I have never entered one . What do I need to do?

    Hi Faye8793!
    Here is an article for you that can help you reset this passcode, in case you have forgotten it:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    https://support.apple.com/kb/ht1212
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Ipad asks for icloud password

    Ipad mini on Power on asks for iCloud password

    To clarify this issue:
    I do have a different (few years old) Apple ID and created new iCloud ID when I purchased this iPad mini. My passwords for Apple ID and iCloud are different. Ipad asks for Apple ID whenever I want to purches any new App or music what seams to be correct.
    iCloud Photo Stream works fine on PC as well as on iPad.
    After Power on my iPad mini I have a popup asking for iCloud password. Regardles if I  enter my pass or just click "Cancel" it goes away and everything including iCloud and iCloud email works fine. When there is no WiFi available It cannot verify entered password anyway and is keep asking until I click Cancel.
    Process of pressing and holding Home button and Power button didn't change asking for password.
    I went to Settings->iCloud->Delete Account and deleted it opting for remove and merge and leter I Signed to iCloud again. No change..
    I chatted with Apple and they suggested to reset WiFi somewhere in Settings->General----..
    This solved the problem for few hours. What I mean when I tried Power off and then Power on again while chatting with Apple the iPad didn't ask for password. After an hour or so it asked again and now is keep asking for iCloud password on power on again although not every time. It has nothing to do with WiFi because it did the same while I was connected to a few different WiFis or not connected at all. Since entering the iCloud password or Cancel does not make any difference until I power it off it means there is a bug somewhere in the Apple's software.
    I do not have many Apps installed and in a mean time I removed King Photo because it was failing sometimes.
    I'll chat with Apple again as soon as I have at least one hour free time during work hours.

  • My iPad asks for my iCloud password but I can not. that I can do? the problem is that I try to access it by putting my email but I do not remember which was which I put.

    my iPad asks for my iCloud password but I can not. that I can do? the problem is that I try to access it by putting my email but I do not remember which was which I put.

    If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I install the iOS 7 and the ipad asks for a code, I never put it a code

    I install the new ios7, the installation when witohout a problem, but in the gettin started part, the ipad asks for a code, I never put one, so I cannot use the ipad because of that.
    I can not restore it, because it aks me to go to adjust and shut down the find my ipad part, I can not get past the code.

    Here it is how I solve the issue. I downloaded the iOS 6.1.3 of my device and installed via ITunes. Then a message of error appear and the ipad when directly to restore mode. Then I Just restore it and That Was it.
    So I can tell That the Main issue is That iOS 7 does not have the restore mode option.
    You know the one where you press the home button, then the sleep button and release the home button.

  • HT1414 I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday.  The security lock have never been enabled.  After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD!   ?????? APPLE, what programming subrouti

    I am on Holliday and started an iOS upgrade to my iPAD 2, yesterday.  The security lock have never been enabled.  After the upgrade via WiFi in the hotel, the iPAD asks for a 4 digit kode to access my iPAD!   ?????? APPLE, what programming subroutine is forgotten during functional testing prior to release of the latest iOS upgrade???? - Now from a borrowed hotel guest computer I post my ”HELP NEEDED”.  Please advice if there is a way to skip a security kode I never enabled (nor even tried out and diabled) – WITHOUT spending time to find a Apple store helpdesk  that restore via iTunes, and delete all my local data.  
    Reg
    SpannishFLY

    During the setup of iOS 7 which you went through after installation it asked if you wished to create a passcode. It is possible to skip setting up a passcode at this step but you must have created one.
    If you can't remember the passcode and you have enabled "find my iPad" you can use http://www.icloud.com/ to remote erase your iPad, then you can set it up again, and restore it from an iCloud backup.

  • Why is my ipad asking for an unlock code and I did not set this up?

    why is my ipad asking for an unlock code after downloading new software?  I did not set this up and had no idea what the password is. I tried 1234 and 0000 and now it is disabled. Help

    I have an ipod 5g. i changed my passcode and then got a notification of a 7.0.2 update. i updated and now my passcode wont work? im certain that i entered the right passcode. i would try resetting on my macbook, but the screen is shattered.

  • My ipad asks for imessage password

    My ipad asks for imessage password but wont accept what I put in

    Unable to update or restore
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

    Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

  • I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually. Smiles of Emoji are supported by the program for Mac? Help to s

    I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually.
    Smiles of Emoji are supported by the program for Mac?
    Help to solve a problem, please.

    Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

  • After i installed ios7, my ipad ask for paascode that i never set it up with and now is locked. what should i do to unlock it !?

    My ipad after installing ios 7 is locked and asking for passcode that i never gave it to. what should i di to unlock it. Thnx

    Are your sure that the iPad is not asking you to CREATE a passcode. It will do this as part of the iOS 7 upgrade. If the device is truly asking for a passcode and it is now locked take a look at this Apple support page
    http://support.apple.com/kb/ht1212

  • IPad asking for password for airprint

    I have a HP5525 All in One. I print via airprint from my iPad quite happily. I have to select the printer on the Wi Fi page of my iPad (HP-Print-BE-Deskjet 5520).
    I am trying to link my Wife's iPad to the printer. It is on the same network and the printer appears on the Wi-Fi page of her iPad but when selected it asks for a password. As far as I know there is no password.
    Is there a solution or a reset.
    Thanks in advance
    Pete Price
    This question was solved.
    View Solution.

    Hi Pete,
    It's the purple icon with the thumbs up. Thanks
    Although I am an HP employee, I am speaking for myself and not for HP
    Say thanks by clicking "Kudos" on the left in the post that helped you.

  • IPad asking for

    My ipad 3 starters asking for my appl I'd for no reason. What can I do about it

    Double click the home button, then when the recents apps appear across the bottom of the page, touch one until they all start to jiggle and a recircle with an X in it appears with each app.  Tap each of those red circles to dismiss all of the apps.  Then do a reboot by holding the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appers.
    See if that doesn't clear what ever is causing it to ask for your AppleID info.

Maybe you are looking for

  • Always installing at start

    I have a Nokia N73. Recently I updated my software after saving my settings through the safety vault in PC SUITE. After updating was complete I reinstalled the saved settings. Now I have a try from the cell phone to install programs from the memory c

  • Wireless Keyboard Question

    When using the Apple wireless keyboard with Apple TV, what are the keys involved? The direction keys are kinda self explainatory, but having trouble figureing out the others. Such as to back track like the "Menu" button on the ATV remote. Thanks in a

  • Activate debugger in SAPSCRIPT

    Hi all, Somebody know if is it posible to debugg Request for Quotation(ME42)? It is a Sapscript and I need to make a debugg  althoug the debugger was activated  in the transaction SE71 the form  is printed  Automatically. Help please, how can I  acti

  • Relation ships in atg

    Hi when relationship objects are created in atg?

  • Zeros in PSA

    I enhanced datasource 0CO_PC_ACT_02 with field "Standard Price" (STPRS).  The values are pulled from source table MBEW.  The records with zero values (0.00) in the source table appear as null in RSA3 (extractor checker) and also as null in the PSA.