Logical system for new client

Hello experts,
I want to copy all users and assigned roles from Quality to the production system.
But as a safety measure I want to copy the existing users and role assignment from production system too one of the test system.
For this I created a new client in test system. My question is:
1) Do I've to create a logical system for this new client?
2) Is there any other step that I need to take beside creating RFC connection?
Thanks in advance

Hi,
>
> 1) Do I've to create a logical system for this new client?
Yes.
> 2) Is there any other step that I need to take beside creating RFC connection?
>
I think this is sufficient. Check this [link|http://help.sap.com/saphelp_sm40/helpdata/EN/4e/2d5dfaedbf11d3b7f60000e8160175/content.htm]
Thanks
Sunny

Similar Messages

From R/3 to CRM create one logical system for CRM client 300.

Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

Hi,
Business Systems are te logical system name for a CLient in the SAP.
These can be reused again for different configuration scnario that you must have created for different interface.
All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
Regards
Vijaya

Create a client and logical system for BW

Hi all,
Can anyone show me how to create a BW client?
create a BW client and logical system for BW client.
create sourcesystems for the other clients in BW.
I have follow some documents
B84: BI Connectivity
B03: General Settings BI Integration
But it's not working the data can't flow to BW server.

hi,
check out the following thread's. it will guide you
Connection steps for SAP BW and R/3
Info required while creating source system
R/3 Source system creation error in BW 7.0
regards
harikrishna N

Logical Systems for client 000 and 001

I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
Do I need to create logical systems for clients 000 and 001?
Do I need to creat rfc's for these?
Thanks,
Daniel

no, no need.
you will create a logical system name for the copied client (such as 100)

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Relationship between logical system and a client

Hi,
Our internal notes say that, in order to create a new client, I must do the following:
1. Create a logical system using BD54. The client name must be SID + "CLNT" + number. In my case, this would be NSPCLNT100.
2. Create a client using SCC4.
Questions:
1. What is the relationship between the client and the logical system?
2. How does SAP know that client number 100 must be related to NSPCLNT100? I am not specifying this relationship anywhere.
Thank you in advance for your help.
Regards,
Peter

you assing logical system to a client from SCC4

How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

"No Logical system for FI is maintained" error message

Hi Experts,
When I am trying to create Shopping Cart in SRM portal for a free text material I am receiving the below message
"No Logical system for FI is maintained".
I was able to create Shopping Cart successfully for an imported material from R/3 back-end.
I have verified the previous posts on the same message but I beleive I have already those settings in place.
Request you to help.
Thanks & Regards

Hi Rahul,
Please make sure you have maintained the attributes ACS and BUK in the organization model.
Also please check that you have filled the responsibility and function tabs for the corresponding purchasing organization/purchasing group.
Did you do a client copy among your systems?
In the table BBP_DET_LOGSYS it may still contain the old product category GUID from the other system.
After downloading the customzing object, DNL_CUST_PROD0, in your system, the GUID created in COMM_CATEGORY table could be different from the one used in BBP_DET_LOGSYS.
Redo the "Define Backend System for Product Category" in the IMG and retest the issue. Please also verify the business organization settings.
I hope this information helps.
Kind Regards,
Edel.

How to Assign Logical System to a Client in SALE Transaction

Hi ABAP/EDI Specialists,
1How to Assign Logical System to a Client. In the SALE transaction window.
I didn't see any Receiving and Sending Systems(Tree). But I can see Logical Systems. In the Definition and Assign Subtree are there. I created two Logical Systems STUD_S and STUD_R. When I executed Assign Logical Systems. I got a window, Where I can see a list of Clients. I got confused, how to Assign those Two Logical Systems to Client 800 and 810. Finally I double Clicked on each client and in the next window. I changed the Logical System to STUD_S for Client 800 and Logical System STUD_R for client 810. and saved them.
Is this procedure correct???
Why I need this is, While generating partner profiles in ALE Model (BD64), I am getting no list at all. When I executed I got no list.
"No messages have been defined for the selection conditions in the Model"
I got struck at this point.
Please help me to come out of it.
Thanks,
Chinna

Hi Chinna,
Thanks for such a valuable information. I am able to move further. But i got struck while generating parntner profiles from ALE distribution model.
Log For Partner Profile Generation:
Partner:
Partner ZVK_SS_800 as partner has been Created ( Sending System)
Partner ZVK_SS_820 as partner has been Created (Receiving System)
Port:
Port Cloud not be Created
RFC destination ZVK_SS_820 not specified for system ZVK_SS_820
Enter the RFC destination and Restart the generation
It is not recognizing the RFC port, even though i followed all the steps correctly.
While creating RFC destination, can someone tell me How to fix the above error and what is the Client No, Username and Pasword i have to give.
Thanks
Chinna
Edited by: Chinna on Jun 6, 2008 7:43 PM

Assigning logical system to a client in CUA

Hi All,
I have got a doubt in the basic configuration in the setup of CUA.
I have performed all the steps that is given in the CUA cook book.
In, assiging the logical system to a client, whether this step shoud be done only in the central system alone.
Or the assignment should be done in the child system also.
When i created the all the steps in central system, logical system is created automatically in child system. but in the client assignment i didn't find information. in cookbook also they have do it in all the SAP system.
kindly advice.
Thanks and Regards,
Subhashini.

>
> So creating clients in Central system is enough for the child system.
The term you used "Creating Client" is technically wrong in this regard. You already have a client which is in use as Central system - right? You need to maintain the details of Logical system names of all the Child system in Central system to keep the central system updated with the knowledge of type and name of the Child systems it has. This definition can be done by using TCode BD54 which is table maintenance view ( V_TBDLS ) of the table TBDLS.
There is nothing to do or even can be done like Creating Client within a client (here your central system).
> Since there is noe transfer of user master from child to central system no need to create a client for the logical system.
>
Its true that there will no transfer of user master from child to central system. But of course the similarly here you are not creating any client within the child system. You are just creating the logical system name (tcode BD54) for this client (child system) and mapping it with the client in tcode SCC4.
Let us know your question. Also as suggested by Barnherd, please go through the SAP Help documentation on CUA. Also try to get an overview of Client in SAP (from SAP Help or SAP course ADM100) and Logical Systems.
Regards,
Dipanjan

ALE logical systems for business service or process

Hi,
I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
"Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
How can I handle this problem?
Should I hard code values somewhere?
Which ones?
I have read the other posts for the error above, but my situation seems to be different.
Help!
Chris

Hi,
To solve your problem, here my solution:
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Mickael.

Logical System for RFC-Business system?

Hi,
I want use RFC adapter for my scenario like File to RFC.
The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
Regards
Gopi

logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
you can check the logical system names of ABAP application servers at bd54 tx code.
Regards,
Henrique.

Cost center integration with HR - logical system for CRT inconsistent

Hi there,
we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
Any ideas how to solve this issue?
For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
Thanks for your advices,
Igor

Igor :
I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
Rgds.

Logical system for new client

Similar Messages

Maybe you are looking for