Logical System Is Inconsistent

We have done some development for COPA, and I keep getting an error "Object CTR BFS/100016 is assigned to logical system BFS, but should, according to the distribution scenario you have configured, be assigned to logical system BFSBF6030". This system was a copy of production.
I am new to this, are the messae referring to the configuration in SPRO or to distribution model? Do you think the data is inconsistent? Has anyone experienced this?

Hi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil

Similar Messages

Cost center integration with HR - logical system for CRT inconsistent

Hi there,
we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
Any ideas how to solve this issue?
For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
Thanks for your advices,
Igor

Igor :
I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
Rgds.

Logical system for CTR 5000/5300F04000 inconsistent

How can I solve the below error:
Logical system for CTR 5000/5300F04000 inconsistent
Message no. KC038
Diagnosis
Objekt CTR 5000/5300F04000 is assigned to logical system GC7CLNT520 but should, according to the distribution scenario you have configured, be assigned to logical system GC7CLNT510.
System Response
No further processing possible.
Procedure
Correct this by either assigning CTR 5000/5300F04000 to the right logical system or changing the distribution scenario.

What is the version you are using?
You can also please check the following note:
Note 210842 - Distributn cost center master data w/out active ALE

Logical system entry for table entry

Hi,
After system copy from one system name to another , I am facing some inconsistenices in various tables.
The table entry can be seen in se16.But when I try to select entries from the same table using SELECT statement, table are not getting populated.
I ran the BDLS also . How do I check the logical system entried for table where I have inconsistent entries?
Thanks,
Chitta

Hello Chitta,
But when I try to select entries from the same table using SELECT statement, table are not getting populated.
what are you trying to populate?
If your question is, its not showing anything... what error message you're getting? are you trying to run in the DB level?
If you're getting error, that this object doesn't exist in the database then you might not be logging with correct user. its an SAP table, then its owner is the SAP schema user. If you login with the schema user, it should show in a normal select statement. But if you login with <sid>adm then you have to give the correct schema id before tablename.
select * from <SchemaID>.<tablename>
SchemaID may be sapr3, sapsr3, or sap<SID> depending on your release.
Regards,
Debasis.

Couldn't create jco client connection for logical system

Dear Experts,
we are facing a strange issue in our custom webdynpro java application, few of our portal users are getting the "couldn't create jco client connection for logical system" for Model Data JCO Destination. below are details
1. portal version 7.02 SP14 (we have recently updated to SP14 from SP02-- is this is causing the issue ?)
1.1. updated the NWDI track with SP14 SCA files as well as added latest WD Runtime SCA file deployed the applications to Production also.
2. above said exception is inconsistent and happening for only few users
3. ping and test of jco destinations are successfull in content administration as well as in SLD, destinations were added in the SLD system.
4. cleared the JCO ARFC meta data cache in webdynpro console
5. jco destinations are configured using uid/pwd, configured user is not locked active and tested in the backend by logging in with the same user.
6. restarted the portal server
even though, we are getting the above said exception for few of portal users randomly.
Please help me on this ASAP, as i am not getting any further help on this.
Thanks,
Ram.

Hello Ram,
Check the JCo Pool Configuration settings of your JCO Destination. This message normally comes when the maximum connections has been reached. Increase the "Maximum Connections" to some number depending on the usage. A good habit is to disconnect the jco connection after executing the same in your webdynpro code if you don't want it to be synchronous.
<ModelName>.modelInstance().disconnectIfAlive()
Hope this helps.
Regards
Vijay

Procedure to restart cancelled BDLS (logical system conversion) !! Urgent

Hello Experts,
I need immediate help. I started the BDLS (logical system name conversion) and it was running for about 3 days. It was about 70% complete. But because the users could not afford downtime, I cancelled the BDLS job. When I tried to restart BDLS later, it is giving an error "Logical system name already exists". Kindly note that we are on R3 4.6C environment with CRM 4.0. The BDLS conversion is on R3 4.6C QA which was refreshed from R3 4.6C prod.
My question is
1- Is there any way to restart BDLS on R3 4.6C? If so, what is the procedure?
2- The BDLS was 70% complete, before it was cancelled. So it created a new logical system name. Is it possible to delete this new logical system name without any problems?
3- Because BDLS converted 70% of the tables from old logical system name to new logical system name. There might be data inconsistency.
3a- Is there a way to reset all the converted tables to old logical system name?
3b- Is there a report or program or a procedure to reset the BDLS?
4- Will this state of having 70% of tables with new logical system name and 30% of tables having old logical system name create any problems for the data transfers and for the business?
Kindly help me in this regard as this is a very urgent issue. Points to be awarded for any kind of small help.

Thanks a ton Srikishan. I will do the same as you have said.
A couple of more questions.
1- Do I have to start this immediately now, in the morning hours, asking all the users to get disconnected or schedule it later, during the night time or on the weekend.
Will this current state of having 70% of tables with new logical system name and 30% of tables having old logical system name create any problems for the business?
2- If this there a way ( a program, a procedure) to reset changes done by BDLS?
Kindly note that due to the database being large, BDLS is taking 3 days. So I cannot do this during the week days (during business hours), I will have to reschedule this during the weekend.
Please let me know. Thanks.

Logical Systems in Business Services

Hi
In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
i.e. to do
MyBusServ1, Z_LS_1
MyBusServ2, Z_LS_1
is not possible ?
When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
Thanks
Damien

Thanks for the replies
Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
Thanks
Damien

Logical System in IDOC-XI scenario

Hi,
I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No. 2) Logical System.
my questions are
a) Are we use Logical System in B to B scenario ?
b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
Thanks and Regards
Mahesh.

Hay Kumar,
Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
Have a Good One,
Uri Lifshitz.

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

Logical System(ORGLOGSY) populating from which table in R/3 system

Hi Friends,
I would like to understand about the Logical System(ORGLOGSY) from which table or from where this logical system being populating.
Because we could see this fields Logical System(ORGLOGSY) exist in PO item, HDR, SGR data sources.
Can anybody give some idea, how we'll get this source system logical system name into BW system.
SIRI

Hi Siri,
Check here
V_TBDLS
TX: RSA13----->Tools -
>assigment of source system to source system id
hope this will help you.
Thanks,
Vijay.

Logical system name for acknowledgement in BPM

Hi,
I have a szenario:
IDOC --> BPM --> MAIL
Inside BPM I check the message and depending on an xml-element I stop the process or I send the message by mail.
When I stop the process the BPM sends back an acknowledgement and in SXMB_MONI I can see an error of the acknowledgement:
"Sender Test_BPM_IDOC_TO_MAIL kann nicht in ein ALE Logisches System umgeschlüsselt werden" (Sender can not convert in a ALE logical system)
What can I do?
Possible Solution 1:
I can define my BPM "Test_BPM_IDOC_TO_MAIL" as a logical system (including WE20 for ALEAUD).
Possible Solution 2:
I can enter an existing logical system name in the "adapter specific attributes".
BUT it is not use the same logical system name twice (BAD ... or is there a workaround?
Is Solution 1) a common way?
Thanx
Regards
Wolfgang Hummel

Hi,
there are many ways:
some for aleaud are described in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
>>>>Is Solution 1) a common way?
no this is not good a good idea
BTW
you can also supress aleaud raport IDX_NOALE
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

Logical systems while implementing charm in solution manager

Hello Everybody,
I just wanted to know how many logical systems we need while implementing charm in solution manager 7.0. I have 3 clients in development , 3 clients in Quality and 1 client in production.
Thank you,
vikram.

Hi Vikram,
Yes, i1n ChaRM we always work with logical systems, I mean clients.
The standard is:
DEV -> QAS -> PRD
However, you can also use:
- Minimum
DEV -> PRD
- Target groups
DEV -> QAS -> PRD
- > TST
DEV -> QA1 -> QA2 -> PRD
DEV -> QA1 -> PR1
-> QA2 -> PR2
There are a lot of combination possible.
BR
Fernando

Logical System is Not Defined in EBP...

Hi SAP GURU's,
Please do Accept My Thanks for Kind Help
Rendered So far ..
My issue is whie working wih Accoutn Assignment is EBP ,I Tried to Maintain Logical System ..But system is throwing Error Massage Logical System is Not Defined in EBP..
Where as it was Defined and Assigned to the Client
in the Configuration ...
The Same thing has been defined in R/3 also ...
what Could be the Reason..? ? ?
Could Any Gentleman through Some light on this
Suitable Points Assigned for the Right Answer
Thansk in Advance
Adarsh

Hi,
Pl define the same logical system names in the Define Back end systems or in the Table
bbp_backend_dest.
Thanks & Regards,
Nagarajan

Logical System is not appearing in Informer tab to check SOD's

Hi GRC Experts,
I have an issue with logical system to run risk analysis.
I created logical system by following the Config guide, added physical system and generated rules (RAR Configuration>>Logical Systems>>Generate Rule) for that logical system.
I haven't generated rules for the physical system (RAR Config>>Rule Upload>>Generate Rules) since I dont want more rules to be displayed in the reports.
However I do not see logical system as an option in Risk Analysis (informer Tab) and Config>>Schedule background job for BAtch Risk Analysis>> under system as well.
It would be great if any one advice me on this.
Regards,

Thanks Chinmaya,
Yes you are right, I confirmed with a friend (my ex-GRC colleague) of mine as well.
can't execute sod checks on a logical system - logical systems are only intended to eliminate the need to add the same rule set over and over for the same types of systems
Regards,
Ramesh K

Logical System Is Inconsistent

Similar Messages

Maybe you are looking for