Logical system missing in PI SLD

Hi,
The problem I facing currently during transport of SAP business system from Dev to Quality system, logical system  is missing in the Adapter Specific parameters.
The actual problem I have seen in the SLD, the logical system is a blank and even after I pushed from RZ70.
Can you please suggest me how could i retrieve the Logical system in the SLD by automatically.
Thanks in advance.
Best Regards,
Sateesh

Hi Sateesh,
Please check the following links for similar issue , if it helps:
Logical system of PI in SLD
Logical system name in SLD for the R3 buss. system is not open for input.??
Logical System Name Not appearing in the Business System
Also, you can enter the Logical Name in the SLD, for the related TS / BS.
Regards,
Azhar

Similar Messages

  • Logical System not appearing in SLD

    Hello Friends,
    Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
    I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
    The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
    [The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
    Request your kind adivse on what can be done. Where can I lookout for possible errors.
    Thanks & Regards,
    Anand Patil

    Hi
    On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
    If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
    Check the Same SLD Roles with some PI Service  User.
    Regards
    Prabhat Sharma.

  • SLD Logical System Name Changes not taking effect in IDOC

    All -
    I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
    Thanks!

    Hi Dennis,
    After changing the logical system name in SLD have you done "Compare with  SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
    - Pinkle

  • Receiver service ??? cannot be converted into an ALE logical system

    Hi,
    I am hoping for some help with an Idoc issue in XI version 3.0.  The scenario is like this:
    Flat file->File adapter->XI->Idoc adapter->R/3
    I have configured a scenario in one system like this that works fine.  But in the current system I am getting the error message "Receiver service ??? cannot be converted into an ALE logical system" from the Idoc adapter.
    As it is XI 3.0, I have set the Agency and Scheme in the destination communication channel to <Service>, ALE#LS and in the destination party, I have created a alternative identifier <Service>, ALE#LS, SYSCLNT200.
    I have configured an ALE logical system name in the SLD.
    I have cleared the SLD cache in the integration builder.
    The ALE logical system name was not in the SLD when the message first appeared, but I thought clearing the cache would fix that.  I have not tried deleting the service and re creating it.  That is my next step....if all else fails.
    Not sure what else I haven't tried.
    Can anyone offer any advice?

    Thanks Sam Raju for the reply.
    On your questions:
    1. I checked IDX1 - port for the receiving R/3 is defined as SAPIR1_300 (port: SAPIR1 and Client: 300) and it is mapped to RFC destination of IR1300.
    2. Checked RFC destination IR1300 - it is setup as R/3 connection and checked test connection and remote login and both are working fine
    3. Checked IDX5 - did find one message (status is successful) corresponding to the file I am sending into R/3 and this entry is an Outbound entry.
    Question: Should there be two entries here in IDX5 - one for inbound and the other for outbound?
    May be I am doing something wrong here in setting up the interface mapping and endpoints. Anyway when I check the IDOCOutbound in the Soap Header, I see the following:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:IDocOutbound xmlns:SAP="http://sap.com/exchange/MessageFormat/">
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>100</SAP:MANDT>
      <SAP:DOCNUM>0000000000008002</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>FLIGHT_SAVEREPLICA01</SAP:IDOCTYP>
      <SAP:MESTYP>FLIGHT_SAVEREPLICA</SAP:MESTYP>
      <SAP:SNDPOR>SAPBXI</SAP:SNDPOR>
      <SAP:SNDPRN>PRISM</SAP:SNDPRN>  
      <SAP:SNDPRT>LS</SAP:SNDPRT>
      <SAP:RCVPOR>SAPIR1</SAP:RCVPOR>
      <SAP:RCVPRN>IR1CLNT300</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT>
      </SAP:IDocOutbound>
    Do you see anything wrong or missing here. SNDPOR is XI port, SNDPRN is the source partner (file) and RCV... information is all the receiving R/3.
    I am suspecting that something is missing either here or in the endpoint setup.
    Also, in the TechnicalRouting I have this:
    - <SAP:address version="20">
      <SAP:systemKey>IR1CLNT300</SAP:systemKey>
      <SAP:endpointType>IDOC</SAP:endpointType>
      <SAP:url>IDOC://SAPIR1?RFCDEST=IR1300&DOCREL=&VERSION=3&SAPREL=46C</SAP:url>
      </SAP:address>
    Any issues you see here in url?
    Also, when I look on the XI server, I do not see these files deposited anywhere- so they are going somewhere (as the status in IDX5 is successful)!
    Do I need to activate any queues or triggers anywhere.
    Can you please offer advice and help us out.
    Thanks again.
    Srini
    [email protected]

  • Logical system not updated in the business system adapter specific data par

    Hello Guys,
    I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
    I did a cache refresh using :
    1) sxi_cache --- Full cache refresh, delta cache refresh
    2) Hard cache refresh
    3) In ID "Cleared SLD data cahe "
    4) Refreshed the exchange profile
    But no use
    Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

    When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
    there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
    Run the cache in the ID are there any errors there?
    check the RWB cache monitoring is everything green there?

  • Filt to IDoc: cannot convert sender to ALE logical system

    Hi there,
    i have used forum search for my issue, but could not figure out the issue by myself so far.
    I tried to read a file into PI 7.0, map to and IDoc and send IDoc to SAP system. I have the following configuration:
    Sender: SYSTEM_A
    ---Logical System <none>
    Receiver: SYSTEM_B
    ---Logical System: EIECLNT300
    the IDoc i'm sending looks like this (most of them dummy values):
    <?xml version="1.0" encoding="UTF-8"?>
    <ORDERS05>
    <IDOC BEGIN="value2">
    ---<EDI_DC40 SEGMENT="value2">
    <TABNAM>value2</TABNAM>
    <DIRECT>value2</DIRECT>
    <IDOCTYP>value2</IDOCTYP>
    <MESTYP>value2</MESTYP>
    <SNDPOR>EIECLNT300</SNDPOR>
    <SNDPRT>value2</SNDPRT>
    <SNDPRN>PITCLNT001</SNDPRN>
    <RCVPOR>value2</RCVPOR>
    <RCVPRN>EIECLNT300</RCVPRN>
    ---</EDI_DC40>
    ---<E1EDK01 SEGMENT="value2">
    ---</E1EDK01>
    </IDOC>
    </ORDERS05>
    PITCLNT001 is the logical System name of PI. Do i need to configure "PITCLNT001" as logical system at SYSTEM_A (besides, thats not possile)?
    regards,
    MS
    Edited by: Manuel Schlestein on Jan 28, 2009 10:39 AM
    Edited by: Manuel Schlestein on Jan 28, 2009 10:40 AM

    Hi
    Create a logical system for SYSTEM_A in SLD (you can give some string) and create that same logical
    system in IDOC side (SALE).
    Thanks
    Prasad Nemalikanti

  • BS- Adapter Specific Identifies - Logical System: value is missing

    Hi,
    I've created a simple scenario in which idoc is being received in ECC (by idoc receiver). my communication channel (i.e., soapSender) is part of my INTEGRATION_SERVER business system. i checked, for the relevant business system the Adapter Specific Identifies -> Logical System values and it was missing. therefore, i had to update the correlated technical system definition (at SLD) and updated required value (i.e., logical system). somehow the value is still missing when i re-check the business system (at Integration Builder).
    i took the following actions:
    1. delete and re-import BS from SLD.
    2. re-start xI
    and nothing was changed.
    What can be done?
    Regards,
    Uri

    Hi Uri,
    >Indeed, the LS was not exits
    I do not 100% understand your statement. Plz check AGAIN (in SLD) if the logical system name is still there.
    My suspect was that a ABAP job (you can look to it in RZ70) is overwriting the technical system.
    Regards,
    Udo

  • SLD doesnu00B4t refresh de Logical System

    Hi All,
    I work on enviroment that had never had an IDOC scenario, because this the Technical System in SLD doesn´t have a Logical System.
    So, now the company needs a IDOC scenario, and I created one correct logical system in the BD54 (R3 Receiver), after this I updated the Logical system of the Client in Technical System (SLD).
    However, When I check the Business system linked with this Technical System as I said above, the logical system name isn´t updated as I did.
    I tried to create other clients in TS to see if the BS refresh, but the Logical system still not showing up in BS.
    Am I missing something ?
    The BS needs to have a Logical system name and thus I can update the BS in Integration Builder (configuration)
    Thanks in Advance.
    Diego Crespo
    Edited by: Consultores Procwork on May 13, 2009 4:42 PM

    Hi
    -->While creating technical system as WEB AS ABAP in your SLD you need to maintain the details of your R/3 system like DB Host name,Installation number,Client etc.....While creating TS you no need to maintain any LS.
    -->While creating the Business System as WEB AS ABAP along with your name to BS it will ask the LS name and you ned to select your required TS(ie WEB AS ABAP TS).
    -->The LS name which you maintained in your SLD must and should created in your R/3 system in BD54 and that LS name should be assigned to client using t-code SCC4.
    -->If the LS name which you assigned to your BS is not reflecting in your ID means,
    FROM->MENU->Clear SLD.
    -->Select your BS and click on button compare with SLD
    Thanks

  • Regarding "Error  An SLD system has not been assigned to logical system "

    Hi all,
    I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
    nformation  Processing BBP_PO_SEND_XML Is Started  
    Error  An SLD system has not been assigned to logical system  
    Error  Action could not be successfully executed 
    The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
    Thanks,
    Vijay

    Hi,
    You should assign this here:
    Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
    Here you should fill the "System Landscape Directory Name" for the systems you have defined.
    Regards
    Kathirvel

  • Logical system name in business system (SLD)

    Hi,
    While creating business system in SLD what should give for the logical system name?
    Should the logical system name exists in ABAP stack or the new one?
    Thanks.

    Hi,
    If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
    Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
    Regards
    Seshagiri

  • An SLD system has not been assigned to logical system TEC101

    Hello all
    We are trying to send an message RFC or IDOC from our SRM (5.0) system to the XI (7.0). But we allways get the error
    "An SLD system has not been assigned to logical system TEC101". In the SLD the system is visible, sldcheck works.
    Does anyone know this problem and can give me a hint how to fix this problem?
    Thanks a lot
    Stefan

    Hi Stefan,
    Is there a technical & Business System for SRM5.0 in SLD? If entry exists then confirm if the logical system name mentioned in Business System is TEC101.
    If entry does not exist in SLD for SRM, then in SRM run t-code
    1) SLDAPICUST .. Enter relevant details
    2) RZ70 : Give XI Server details , activate and then Execute.
    Once you do that you can see entry for SRM in SLD.
    After that try running the schenario again.
    Regards,
    Sumit

  • Logical System Name in SLD

    Hi All,
    I was going through the guide
    https://websmp105.sap-ag.de/~sapdownload/011000358700001410142005E/Configure.pdf
    for the configuration of IDOCS. In this document, they have asked to verify the name of Logical System in SLD. In SLD I cant find an entry for the field Logical SYSTEM(for my client xxx in R/3). Now I do not want to delete the existing bussiness system but edit it to contain the Logical System Name in it.
    Pls help me out.
    Thanks & Regards,
    Jai Shankar.

    Hi
    - Go to Technical System in the SLD.
    - Select the system you want to check
    - Select the client number you want to check
    Here you will find the Logical System Name

  • Logical system name in SLD for the R3 buss. system is not open for input.??

    Dear all,
    We are upgrading to PI 7.1  and have a problem in a scenarie  where PI is sending IDOC to R3.
    The problem is probably related to the fact that it is not possible to write a logical system  name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for  the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Regards Ugur

    There are two ways....
    Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
    Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
    Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
    regards,
    Arvind R

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

  • SLD - Logical System Management

    Hi,
    We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
    Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
    Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
    Thanks and regards..
    Haritha

    Hi All,
    We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
    Hi,
    We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
    need to configure SLD and register our Business systems. The problem is
    we have the concept of using the same logical system for all our SAP
    systems, say WRPCLNT750, when we are hooking our systems to their
    respective BW systems. And in SLD, we have problem becuase of this, as
    it recommends to have unique logical system name for each Business
    System being registered.
    We want to mention some points in here about our landscape and some of
    the recommendations we got from SAP regarding this. Ours is a very big
    warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
    recommended using the same Logical System name for all the SAP systems.
    Hence we are using the same logical system name for our systems.
    So now coming to our problem, can you please tell us what would be the
    best practice that needs to be followed now for SLD Business System
    registration. How can we overcome the hurdle of NOT having a unique
    logical system name for our systems in central System Landscape
    Directory.
    Please let us know the solution as early as possible.
    Thanks and regards..
    Haritha.
    The Response:
    Hello Haritha
    I have found some pass cases with the same question that you have,
    however, the replies from developer are as below.
    Logical systems cannot be duplicated within the SLD, that means one
    Business System per Logical System name, both need to be unique, the SLDis working a designed here.
    I would suggest you rename one of the copies of the productive system
    to solve this.
    My apology that I couldn't provide you a better answer for this.
    Thanks & Best Regards
    Andy Lam
    Active Global Support - SolMan & Technology
    Kindly, please let me know your suggestions.
    Thanks and regards..
    Haritha.

Maybe you are looking for