Logical system name in business system (SLD)

Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.

Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri

Similar Messages

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • I need help in logical system name in business system

    i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
    pls giv me a steps to reflect changes back in ID.
    thanks & Regards
    Manikandan Shanmugam

    open BS in edit mode,
    choose from menu: Adepter Specific Identifiers
    Here you push button: Compare SLD data
    Save and activate

  • Same Logical System Name, different Business System

    Hi all,
    I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
    IX

    Hi,
    You cannot have same logical name for two business systems....
    Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
    1. Create a business system with this logical system
    2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
    This may lead to discrepancies....
    Regards
    Suraj

  • Logical System for RFC-Business system?

    Hi,
    I want use RFC adapter for my scenario like File to RFC.
    The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
    Regards
    Gopi

    logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
    you can check the logical system names of ABAP application servers at bd54 tx code.
    Regards,
    Henrique.

  • Logical system name in SRM system

    We are into SRM version 5.(SRM server 5.5) with the backend system as SAP ECC 6.0 .
    The logical system is defined as '0000000050' for backend SAP  system . All the systems like CRM and BW uses this as the logical system name for backend system . Recently SRM is implemented in our organization and we have no other choice and have to use the logical system name as '0000000050'
    When product categories are assigned in the org attributes , the system stores the back end system as  50 and this is the issue. SAP support mentions that this is issue with logical system naming convention and that need to be fixed . But they fail to understand that the same name works fine in all other systems and also in SRM system except product categories .
    Is there any OSS note for this fix. I would like to hear your experiences in this scenario.
    Thanks
    Mani

    Hi Mani,
    Logical System names are system specific, hence you have a different name in SRM system which will represent your backend system and this is not at all an issue. As suggested by SAP; '0000000050'  is not the best name as per best practices.
    You should have a name which should be of the pattern: <SID>CLNT<Client Number>.
    Now here is the solution/work around. But be very careful and try this in sandbox system before being carried out in Dev/QA/PRD systems. Please make sure no other users are performing any activity while these tasks are being carried out.
    In addition, please read through the ["Set up and system copy of SRM server 5.5";|https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf]  guide before you carry out this activity:
    The below activities are to be carried out only in SRM system
    I assume SRM & Backend are separate instances
    1. Create a new logical system name for the backend system in SRM system as per the standard suggested above.
    2. Then use the transaction BDLS, to convert the old logical system name to new logical system name in all the tables.
    3. Now, the step 2 ensure the logical system name is converted appropriately in all tables except SRM Org Structure related table.
    4. Use the report RHOMATTRIBUTES_REPLACE, for replacing all the old logical system value with new logical system value. Please note while providing the inputs in the screen, there will be a Checkbox field called "Sub-String", you must check this one for all attributes you enter in the report. Then when you execute the report, a list will be display, here you have to select all the rows and click the first button on the toolbar. Only then the attributes will be updated.
    Please let me know, if further inputs are required.
    Regards, Kathirvel

  • 3rd party tech systems for multiple business systems...

    I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
    Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
    -Teresa

    Hi Teresa,
    >>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
    I believe you can only do an incremental export/import
    sld does not allow importing/exporting one product...
    Remember to do a backup of your QA SLD
    (from the SLD - administration)
    then if you make a mistake nothing will happen
    about the second question:
    <i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
    Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
    this should be possible not only for SAP systems
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • No Logical System Entry in Business System

    When I will send an IDOC from XI to a target R/3 system, I am getting an error "Unable to convert the sender service to an ALE logical system "
    I checked the threads and the problem seems to be, that there is no Logical System recognised by the Business System.
    I'll checked the logical System in the Technical System in SLD, and it is there.
    I checked SALE, and the entry is in the systems.
    But when I go to the Integration Directory and check System-->Adapter Specific Informations, I see an empty entry for "Logical System". The field stays un-editable and when I hit the "Sync with SLD" button, nothing happens.
    Any idea, how to either enter the logical system or make it recognise the SLD entry?
    Thanks for any hints, points will surely be awarded

    Hi,
    Have you looked int XI FAQ by Michal?
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Have a look into the weblog
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    which addresses your problem.
    Regards,
    Jai Shankar

  • Logical System name in Entitlement Systems

    Hi,
    In Authentication > SAP, I have given System and client names, but logical system name is not generated.
    Please let me know how to resolve this.
    Thanks in advance,
    Priya

    Hi John,
    Thanks for your response.
    FQDN and IP address are added in the host file.
    But still the logical system name is not displaying.
    Without logical system name, other details are filled for Application Host Logon as
    Application server name - Host name
    All the details are filled except the selection of logical system name.
    Then it is displaying the error - "Please specify complete credentials for either load balancing or direct application host logon"
    Please let me know how to resolve this.
    Thanks,
    Priya.

  • XI system as a business system in XI SLD?

    Hello,
    I recently saw an XI SLD where not just the R/3 business systems, but also the XI system itself was configured as a business system. Is there any need to have the XI system itself in its own SLD as a business system?
    If yes: Do I also have to configure transport target for the XI business system (e.g. from XI dev to XI prod)?
    Thanks,
    Christoph

    Hi,
    yes the XI has to be configured as business system with role 'Integration Server'.
    Regards
    Patrick

  • How do you convert Logical System Names of BW systems in BO

    Hi,
    We have implemented SSO where user/role administration takes place in BW, and then imported into BO where authorization to folders and reports are maintained. 
    What we are NOT yet able to figure out is how to move our BO groups (i.e. those groups that were automatically created from BW roles) and have them automatically mapped to the roles in the next environment. 
    Below is the scenario:
    BW Dev Environment
    System XXD
    Client   100
    Role     ZHR
    BO Dev Environment
    BW role ZHR has been imported and group XXD100@ZHR is automatically created. Also, we have granted group XXD100@ZHR access to different folders, reports and universes in this environment.
    BW Test Environment
    System XXT
    Client   200
    Role     ZHR has been transported from Dev
    BO Test Environment
    We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained. Your help is highly appreciated.
    Regards,
    Olu

    Hi,
    We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained
    >>>you actually do NOT want to have those roles imported because the role from you first system doesn't exist in the second system.
    You first system is pointing to system XXD with Client 100 and the second system is pointing to system XXF and client 200 - very different systems.
    the roles have to be imported as part of the overall SAP authentication configuration. In case this is about having a possible identical folder and security structure I would suggest you use also groups in the BusinessObjects system - standard BusinessObjects groups - use those to assign security and then assign the SAP groups as subgroups. In that way you keep the security configuration and only assign the right subgroups.
    ingo

  • Changing logical client name in BW system

    Hi,
    We want to change the logical client for BW system from BWDCLNT200 to
    BWDCLNT100 in our BWD system. When I change it through BDLS the source
    system connections disappearing.
    Can you please let us know how do we do that without disturbing source
    system connections
    Thanks,
    Santosh

    Hi Gunkan,
    Can you please explain in bit detail?
    As I mentioned it before when I try to convert to new client through BDLS source system connections disappearing
    Thanks,
    Santosh

  • Logical System Name Not appearing in the Business System

    Hi,
    Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
    Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
    Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
    Please also note that Business System is of the ROLE: Integration server.
    When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
    Can anyone please help us to update the 'Logical system name' in Business System in SLD?
    Regards,
    Rehan

    Hi Sunil,
    I followed your link till
    Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
    When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
    But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
    When I go back to Business system again its not showing the Logical system name in Integration tab.
    regards,
    rehan

  • How to change logical system name

    hi,
    there is no logical system name for business system in sld on integration tab.
    this bus sys is based on tech sys which is configured as integration server.
    plz tell me how to give the logical sys name there.
    plz reply me it is urgent.
    vijender

    Jochen Gugel wrote:
    > Hi @ll;
    >
    > at the tab in technical system the logical system name was correct.
    > But it wasn´t shown at the integration tab of the business system.
    > I solved this problem by deselecting the integration server, save this settings and reselect it afterwards.
    >
    > Kind regards
    > Jochen
    hello all,
    I'm actually having the same issue.  This issue is NOT the popular adapter-specific identifier problem where the business system in the ID needs to be compared with the SLD.  This issue is that the within the SLD on PI 7.0 the Logical System Name of a given business system is not present although the logical system name of the specified technical system does appear.  You cannot change the LSN of the business system since it relies completely on the LSN of the associated technical system.
    I used Jochen's approach before and it worked, but i've tried this again since i'm having the same issue.  Only now it doesn't work.
      i solved this issue by deleting the old BS and recreating it
    Thanks,
    Edited by: Jason Ray on Jun 24, 2008 5:47 PM

Maybe you are looking for