Logical System name in Entitlement Systems

Hi,
In Authentication > SAP, I have given System and client names, but logical system name is not generated.
Please let me know how to resolve this.
Thanks in advance,
Priya

Hi John,
Thanks for your response.
FQDN and IP address are added in the host file.
But still the logical system name is not displaying.
Without logical system name, other details are filled for Application Host Logon as
Application server name - Host name
All the details are filled except the selection of logical system name.
Then it is displaying the error - "Please specify complete credentials for either load balancing or direct application host logon"
Please let me know how to resolve this.
Thanks,
Priya.

Similar Messages

  • Logical system name in SRM system

    We are into SRM version 5.(SRM server 5.5) with the backend system as SAP ECC 6.0 .
    The logical system is defined as '0000000050' for backend SAP  system . All the systems like CRM and BW uses this as the logical system name for backend system . Recently SRM is implemented in our organization and we have no other choice and have to use the logical system name as '0000000050'
    When product categories are assigned in the org attributes , the system stores the back end system as  50 and this is the issue. SAP support mentions that this is issue with logical system naming convention and that need to be fixed . But they fail to understand that the same name works fine in all other systems and also in SRM system except product categories .
    Is there any OSS note for this fix. I would like to hear your experiences in this scenario.
    Thanks
    Mani

    Hi Mani,
    Logical System names are system specific, hence you have a different name in SRM system which will represent your backend system and this is not at all an issue. As suggested by SAP; '0000000050'  is not the best name as per best practices.
    You should have a name which should be of the pattern: <SID>CLNT<Client Number>.
    Now here is the solution/work around. But be very careful and try this in sandbox system before being carried out in Dev/QA/PRD systems. Please make sure no other users are performing any activity while these tasks are being carried out.
    In addition, please read through the ["Set up and system copy of SRM server 5.5";|https://websmp204.sap-ag.de/~sapidb/011000358700000310782007E/SRM50_SetupTranspCopy.pdf]  guide before you carry out this activity:
    The below activities are to be carried out only in SRM system
    I assume SRM & Backend are separate instances
    1. Create a new logical system name for the backend system in SRM system as per the standard suggested above.
    2. Then use the transaction BDLS, to convert the old logical system name to new logical system name in all the tables.
    3. Now, the step 2 ensure the logical system name is converted appropriately in all tables except SRM Org Structure related table.
    4. Use the report RHOMATTRIBUTES_REPLACE, for replacing all the old logical system value with new logical system value. Please note while providing the inputs in the screen, there will be a Checkbox field called "Sub-String", you must check this one for all attributes you enter in the report. Then when you execute the report, a list will be display, here you have to select all the rows and click the first button on the toolbar. Only then the attributes will be updated.
    Please let me know, if further inputs are required.
    Regards, Kathirvel

  • Logical system name in business system (SLD)

    Hi,
    While creating business system in SLD what should give for the logical system name?
    Should the logical system name exists in ABAP stack or the new one?
    Thanks.

    Hi,
    If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
    Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
    Regards
    Seshagiri

  • I need help in logical system name in business system

    i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
    pls giv me a steps to reflect changes back in ID.
    thanks & Regards
    Manikandan Shanmugam

    open BS in edit mode,
    choose from menu: Adepter Specific Identifiers
    Here you push button: Compare SLD data
    Save and activate

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

  • Same Logical System Name, different Business System

    Hi all,
    I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
    IX

    Hi,
    You cannot have same logical name for two business systems....
    Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
    1. Create a business system with this logical system
    2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
    This may lead to discrepancies....
    Regards
    Suraj

  • How do you convert Logical System Names of BW systems in BO

    Hi,
    We have implemented SSO where user/role administration takes place in BW, and then imported into BO where authorization to folders and reports are maintained. 
    What we are NOT yet able to figure out is how to move our BO groups (i.e. those groups that were automatically created from BW roles) and have them automatically mapped to the roles in the next environment. 
    Below is the scenario:
    BW Dev Environment
    System XXD
    Client   100
    Role     ZHR
    BO Dev Environment
    BW role ZHR has been imported and group XXD100@ZHR is automatically created. Also, we have granted group XXD100@ZHR access to different folders, reports and universes in this environment.
    BW Test Environment
    System XXT
    Client   200
    Role     ZHR has been transported from Dev
    BO Test Environment
    We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained. Your help is highly appreciated.
    Regards,
    Olu

    Hi,
    We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained
    >>>you actually do NOT want to have those roles imported because the role from you first system doesn't exist in the second system.
    You first system is pointing to system XXD with Client 100 and the second system is pointing to system XXF and client 200 - very different systems.
    the roles have to be imported as part of the overall SAP authentication configuration. In case this is about having a possible identical folder and security structure I would suggest you use also groups in the BusinessObjects system - standard BusinessObjects groups - use those to assign security and then assign the SAP groups as subgroups. In that way you keep the security configuration and only assign the right subgroups.
    ingo

  • Changing logical client name in BW system

    Hi,
    We want to change the logical client for BW system from BWDCLNT200 to
    BWDCLNT100 in our BWD system. When I change it through BDLS the source
    system connections disappearing.
    Can you please let us know how do we do that without disturbing source
    system connections
    Thanks,
    Santosh

    Hi Gunkan,
    Can you please explain in bit detail?
    As I mentioned it before when I try to convert to new client through BDLS source system connections disappearing
    Thanks,
    Santosh

  • Logical System Name Not appearing in the Business System

    Hi,
    Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
    Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
    Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
    Please also note that Business System is of the ROLE: Integration server.
    When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
    Can anyone please help us to update the 'Logical system name' in Business System in SLD?
    Regards,
    Rehan

    Hi Sunil,
    I followed your link till
    Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
    When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
    But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
    When I go back to Business system again its not showing the Logical system name in Integration tab.
    regards,
    rehan

  • Assign a Logical System Name of a production client

    Hi everybody,
    We have an ERP system (now upgraded to ECC 6.0) that is in productive use since 7 years. Until now, no Logical System Name have been assigned to the production client - the field in transaction SCC4 is empty/blank.
    Now we plan to implement a BW, so a test and a productive BW systems have been installed. According to the attached file and content of note 184447 we choose to use "Option 1: Uniform Logical System names clients by system type" for naming convention for LSN's.
    All the systems/clients (BW test and productive, ERP test only) now are assigned with corresponding LSN's, except the production ERP client. It is still without LSN and the client is not defined as Source System for productive BW system.
    So, my question is:
    Should I expect any problems if the LSN of the production client is set up now, after long time, effective productive use?
    I would mention that this is infact initial setup, not a change of LSN. Therefore transaction BDLS is not relevant, I think.
    Thanks in advance

    Hi DB49,
    I already did an initial setup of LSN in the test ERP client (that client is copy of the productive ERP client, i.e. the LSN has not been set). And everything seems to be OK.
    But the documentation says that ".... In a production system, the logical system must not be changed ...".
    "Changed" is not "ïnitial setup" of course, so there will not be any problems I hope, but ...
    SCC4 --> LSN field --> F1 -->
    "System in which applications run integrated on a shared data basis.
    The distribution of data between systems requires that each system in the network has a unique identification. The logical system is used for this purpose.
    In the SAP System the client corresponds to a logical system. You can assign a logical system to a client in the client maintenance (choose Goto -> Detail).
    The logical system is relevant in the following SAP areas:
    ALE  general: two or more logical systems communicate with one another.
    ALE - ALE business processes (for example, cost center accounting): definition of a system where a specific application runs. Changes to master data can only be made in this system, for example.
    Workflow objects: the logical system in which the object is located is always included in an object's key.
    When maintaining the logical system, note the following:
    The logical system must be unique company-wide. It must not be used by any other system in the ALE integrated group. In a production system, the logical system must not be changed. If the logical system of a document reference is not set to initial and does not match your own, the system assumes the document is located in a different system."

  • How to change logical system name

    hi,
    there is no logical system name for business system in sld on integration tab.
    this bus sys is based on tech sys which is configured as integration server.
    plz tell me how to give the logical sys name there.
    plz reply me it is urgent.
    vijender

    Jochen Gugel wrote:
    > Hi @ll;
    >
    > at the tab in technical system the logical system name was correct.
    > But it wasn´t shown at the integration tab of the business system.
    > I solved this problem by deselecting the integration server, save this settings and reselect it afterwards.
    >
    > Kind regards
    > Jochen
    hello all,
    I'm actually having the same issue.  This issue is NOT the popular adapter-specific identifier problem where the business system in the ID needs to be compared with the SLD.  This issue is that the within the SLD on PI 7.0 the Logical System Name of a given business system is not present although the logical system name of the specified technical system does appear.  You cannot change the LSN of the business system since it relies completely on the LSN of the associated technical system.
    I used Jochen's approach before and it worked, but i've tried this again since i'm having the same issue.  Only now it doesn't work.
      i solved this issue by deleting the old BS and recreating it
    Thanks,
    Edited by: Jason Ray on Jun 24, 2008 5:47 PM

  • Logical system names after system copy for SAP ECC 6.0

    Hi!
    We successfully installed SAP ECC 6.0 system as system copy.
    All the logical system names of old system have been copied to new system.
    Question
    What is the approach to change the logical system names for new SAP system?
    a) just via tcode SCC4
    b) via BDLS
    c) other tcodes, reports
    Thank you very much!
    regards
    Jürgen

    I think you can do it through BDLS

  • Logical system names after system copy

    Hi!
    I installed a new SAP system via System Copy (SAPINST) approach.
    As a consequence the old logical system names have been copied.
    Question:
    What is the appropriate approach (tcode, report) to change the logical system names of each clients of SAP system?
    Thank you very much!
    regards
    Jürgen

    Logical System Names
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    In BW, you make the settings for the logical system names in the BW Customizing Implementation Guide under Business Information Warehouse ® Connections to other Systems ® General Connection Settings. In the source system, you make the settings for the logical system in the Implementation Guide under Cross Application Components ® Distribution (ALE) ® Basic Settings.
    Note SR047 lists names that cannot be given to BW systems, because they are reserved for internal use.
    Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: .

  • Change logical system names after system copy

    Hi!
    We successfully installed SAP ECC 6.0 system as system copy.
    All the logical system names of old system have been copied to new system.
    Question
    What is the approach to change the logical system names for new SAP system?
    a) just via tcode SCC4
    b) via BDLS
    c) other tcodes, reports
    Thank you very much!
    regards
    Jürgen

    Hi,
    Go though the system copy guide.
    http://service.sap.com/instguides
    After system copy,
    If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
    https://service.sap.com/sap/support/notes/103228
    https://service.sap.com/sap/support/notes/544509
    Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
    - while running BDLS, execute in background.
    Regards,
    Debasis.

Maybe you are looking for