Logical System name in RSA7 Delta Queue wrong because of BW System Change

Hello All,
we changed our BW System landscape. Before we had one BW development system (System ID: DBW) and now we are using BW development system (System ID: EBW).
Now we face the problem, that in our R/3 system in the delta queue the wrong / old development system is written (DBWCLNT100), but instead of this there should be EBWCLNT200.
Has anyone of you got a clue where we can change this?
BR
Ilona

Hi,
hope you can do the client copy function to transfer the things from one client to other client no.
before doing the operation. please read the oss note carefully
Please refer to Note 552711 - FAQ: Client copy - subsequently See Note 557132 for further information.
and also check these threads
Remote Client copy error
how to do remote client copy ?
Regards
Harikrishna N

Similar Messages

How Delta Queue fetches data in source system.

Hello Experts,
SMQ1 is physical storage of all transactions created in the source system. Delta Queue(RSA7) fetches data from SMQ1. In case of Queued and Unserilized V3 delta where LBWQ and SM13 come into picture. Can you please clarify my doubt.
Thanks in advance.
Zakir.

solved question

I have a new iMac OSX Mavericks. My user name for Apple apps is wrong but I can't change it. I don't know where it came from.

How can I change the Apple ID that seems to have come with my new computer??? It will not go away even though I have gone to accounts and checked out what is there. It is right in the Accounts but what can I do to change it on my computer? I can not download any upgrades. Thank you.

Going to my account did not work because it's the right information. When I have trouble is when I'm trying to sign in for upgrades. There are some letters in the "sign in" box that will not go away...and I can not put the right sign in in that space. Which means that I can not upgrade Pages or any of the rest of the apps that came (free) with this new computer.

Print logical system name

Hi Friends,
I want to print logical system id and system name.
I am trying with sy-name , no result.
Thanks

Hi,
this is wrong forum, ask this into ABAP forum.
The system name you can fetch from view V_TBDLS, and for system id try SY-ID.
Regards,
Sarvesh

IDOC sender: Error in Logical system name?

Hi,
In my current project, the IDOC sender system logical name is P2PCLNT100 but the SLD system name is P2P.
Its an IDOC to proxy scenario. At the receiver system side, the schemeAgencyID is getting populated at P2P and not P2PCLNT100, due to which there is an error on the receiver's side.
Following is already checked:
1. SLD has maintained the proper logical system name for the P2P system
2. The IDOC xml on the XI system has the sender port properly populated as P2PCLNT100
3. I have also debugged the program on the receiver side and fails at a point where it checks the logical system name from the database BBP_BACKEND_DEST.
On the receiver system, the followed error is shown as follows:
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system P2P is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 96</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
Thanks in advance for the useful answers.
Sowkhya

Hi,
1. R/3 system's logical system name and SLD business system's logical system name has the same.
Is there a need to have the business system name in SLD to have the same name as R/3 system logical name?? As far as my knowledge goes, business system and logical system need not have the same name. Correct me if in the case IDOC sender scenario is different..
2. SLDCHECK shows following message:
Summary: Connection to SLD does not work
The issue still persists. Will SLDCHECK correct solve the issue?
Regards,
Sowkhya

I need help in logical system name in business system

i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
pls giv me a steps to reflect changes back in ID.
thanks & Regards
Manikandan Shanmugam

open BS in edit mode,
choose from menu: Adepter Specific Identifiers
Here you push button: Compare SLD data
Save and activate

Logical system name change

Hi all,
Now my BI development is pointing to R/3 development. R/3 logical sytem name is bbbclnt100. Now all my datasources are pointing to this logical system. Our basis people are going to change the logical system of R/3. Please tell me the repercussions? what will happen to my datasources?
Thanks in advance

Anni,
Change logical system name and run BDLS job to adjust. Do not change souce system. If you change source system all transfer rules will get deactivated.
Check: [Conversion of Logical Systems|http://help.sap.com/saphelp_nw70/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm]
Search forum for more links.
Srini

Logical System Name 'WD_RFC_METADATA_DEST' is not properly defined in SLD

Hi,
Im getting this error message:
<h3>
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
</h3>
What action should I take to fix this error? is this a web dynpro side error or basis error?
Thanks!

Dear TJ Ronald Amorado
Please test the JCO destination for the model data and meta data which you are using in the webdynpro model.
As per the error message you are getting 'WD_RFC_METADATA_DEST' is not defined in the QA.
Please create it in the QA manually and test it. Refer to document : - [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Copy the name of the modeldata and metadata and use the same name in logical destination during model creation in webdynpro.
Hope it will helps.
Best Regards
Arun Jaiswal

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

Default logical system names for application and metadata in models.

hi,
I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
how do we change them and re import after changing? in abap we cant change our code in test and prod systems right so how is it in web dynpro java ?
thanks

Hi Jeschael,
thanks for the reponse.
When I create the model, I give the default logical system names and on the next screen I give the
ip address of the backend system, client , login, password etc
Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
thanks
B

Delta Queue (Source System or BW)

Hello all,
Is the delta Queue present in the source system or BW or Both?
Thanks
SD

Hey!
R/3 delta records are gathered in R/3 in a queue for BW extraction purpose. So this queue is in R/3.
When a delta run is scheduled from BW, using the delta infopackage, then records from this queue in R/3 is extracted.
Trust this answers your question.
Prakash

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

R/3 Delta queue during 3.5 upgrade

Greetings Experts,
We're upgrading from BW 3.1 to 3.5, and the documentation calls for clearing the R/3 delta queue before the upgrade. My first question is...how do I do this? If I run all of our delta loads to clear the queue, they will start filling up again almost immediately. Do I have to cancel all my delta loads, then reinitialize after the upgrade?
Also, should I time clearing the delta queue with the BW 3.5 upgrade, or should I time it with the upgrade to the PI 2004 in the R/3 system?
Thank you very much

Hi,
I am still in doubt if it is necessary to stop the productive work in the R3 system during the upgrade or if it is enough to stop the collector jobs (RMBWV3*) and empty the delta queues?
If the R3 system would be up then the MCEX queues would be filled during the upgrade. So there would be entries in LBWQ but no entries in RSA7.
Has onyone left the R3 system in production mode during the upgrade?
Thanks,
Timo

0BBP_TD_PO_1 Delta Problem..Delta Queue not generated!

Hi Experts,
I am working on SRM-EBP Project SRM 5.0 & BW 3.5 version.
We are working on Extended Classic Scenario. I am facing Delta Extraction problem for 0BBP_TD_PO_1 extractor. Everytime I am only able to extract FULL load Delta loading is not working.
I checked RSA7 Delta Queue is showing with ZERO entries, when I checked SMQ1 there is no Delta Queue.
I looked into OSS(448489) note which describe the same problem, but I can't implement that.
Pelase let me know if any body faced the same issue?? Points will awarded ...Thanks in Advance.

hi Brinda
I don't really catch what you explain.
Please do not mix up between datasource from srm side and the dataflow in bw 3.5 or 7 or else.
The alternative and the way I have done it is to plug 0SRM_TD_PO datasource coming from SRM to your standard Infosource 0BBP_TD_PO in BW.
if you prefer you could also go for a copy of the standard infosource you have with 0BBP_TD_PO and plug the datasource i told you.
But really i do not see the problem the plug your former datasource 0BBP_TD_PO and the datasource 0SRM_TD_PO to the same infosource.
The reason you could not find the infosource for 0SRM_TD_PO is that it has not been delivered a standard infosource with the name 0SRM_TD_PO instead you have to use the infosource 0BBP_TD_PO that exactly the same fields if you pay attention.
datasources      -
>                          infosource -
> DSO
0BBP_TD_PO (former one) -
> 0BBP_TD_PO -
> ODS
0SRM_TD_PO (new one)    -
> 0BBP_TD_PO -
> ODS
Let me know if it is unclear.

Clearing Extraction and Delta Queues

Hi Guys,
I have a quite a problem. I am needed to clear Extraction and Delta Queues, but because there are users in the system they just keep repopulating once i have cleared them. Now these queues have to be cleared for a SAP Upgrade and the Upgrade wont continue until both are clear.
I was wondering is there a way to clear both queues with users in the system making changes?
A quick response would be greatly appreciated!
Thanks in Advance,
Nick

Hi,
There is on program"RMBWV*"
where * is equal to application.
It is used to move the entries from extraction queue to delta queue.
After everthing is there in the rsa7,then you need
to run the info package untill the entries become "zero" in rsa7.
May be try to run more than once.
Note:-You need to take business down time ie lock all the user
so that during that time no one update any data.
Hope this i shelpful.
Thanks,
Saveen Kumar

Logical System name in RSA7 Delta Queue wrong because of BW System Change

Similar Messages

Maybe you are looking for