Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1  and have a problem in a scenarie  where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system  name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for  the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
  <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Call Adapter
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>XIAdapter</SAP:Category>
  <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

Similar Messages

  • The sub menus in will not open for my tools in Adobe Illustrator CS6

    the sub menus will not open for my tools in adobe illustrator CS6 and I have the "show tool tips" box marked

    Click and hold. Or Click-hold and immediately move to the right.

  • PO not creating for the matl,giving error Material not maint for purchasing

    Hi SAP Gurus,
    When I am trying to create PO for 1 purticular material, system giving error " Material CG056A not maintained by Purchasing Message no. ME 046 " Please let me know in order to create PO successfully what are all the purchasing related information necessary to maintain for this material.
    Thanks and Regards,
    SHARAN.

    Hi
    While creating the material you have not maintained the purchasing view, hence you are getting an error.
    Maintain the purchasing view for the material in MM01, which will solve the problem.
    Rgeards
    girish

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Two Tracks for the same Runtime System?

    Hello,
    can you please tell me if it is allowed to connect two tracks to the same runtime systems?
    We have already a track connected to our systems. Now we have created a new track to deliver different content to those systems. We wanted to connect the new track to the same runtime systems. Our basis team told me that a where-used message came up that told them "The following runtime systems are already used elsewhere in the CMS domain".
    Can you tell us if we will get problems because of this?
    Thanks in advance,
    Br,
      Michael

    Hello again,
    ok now, thats something completely different CRM modification is always special.
    To be honest i cannot tell for sure what will happen. As far as i know the default deploy strategy of NWDI is "deploy any version" which means NWDI will order SDM to just deploy not regarding any SDM Version (you are on a 7.0x System right?)
    So it should be possible if everything else, excelt those 2 DCs is the same things should work. But if not the last deplyoed version of the shared DCS will be active. Which might lead to problems then.
    As far as you described, the setup is as the CRM modification guides mentioned.
    My first thought is that you are not forced to use CUSTCRMPRJ as SC name for the projects as far as I know. OS maybe the leanest thing would be to just use CUSTCRMPRJ_light (.o)) for the second track.
    Hmmm not sure if this is a good idea or thought to the end. I don't have the CRM modifications guide at hand at the moment. But I guess there was a part where something was mentioned similar to this.
    After all I have to say:Sorry. I can't give you solid, reliable tip/advice for this case. Maybe my thought will help you.
    Or maybe someone else knows better.
    Have a good time
    Jan

  • G/L account picked for the "wrong" source system entry

    Dear Experts,
    in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
    We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
    In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
    But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
    I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
    What can be the reason for the picking of the G/L account from the wrong source system?
    Can the note 1357871 bring the correction?
    Thank you very much!

    Hello Dima,
    I think your problem comes from your source system for product category management.
    Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
    If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
    If it does not work, log an OSS message.
    If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
    Then, your customized G/L account definition for product category  and account assignment category should be OK.
    Regards.
    Laurent.

  • Javascript is required for the Electronic Delivery system.

    I use VPN to access the remote server, and the software will downloaded in the remote server, but when I go to the Oracle e-delivery, and press continue, I got a message: Javascript is required for the Electronic Delivery system. What's wrong with me?

    Sounds like your browser settings are stopping you using the website.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • After installing lion os logic pro asks for the serial number but will not accept it

    after installing lion os logic pro asks for the serial number but will not accept it

    Start Here:
    http://support.apple.com/kb/TS2005

  • HT4999 I have a new phone and a new computer.  Where can I find the downloads for the latest operating system files.  thanks

    I have a new I phone and a new computer.  I don't know where to get the download files for the lates operating system.

    To update iOS on an iPhone not running iOS 5 or later, connect the iPhone to iTunes and under the Summary tab for the iPhone sync preferences with iTunes, select Update. If there is an update avaiable, you should be prompted automatically.
    If the iPhone is running iOS 5 or later, the same applies along with another option which can be done direct with the iPhone.
    Would you like a link to the iPhone user guide where this is covered? Apple also includes a Safari bookmark with Safari on an iOS device for easy access to the user guide on the device.

  • E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

    I have a problem with my ThinkCentre E72 (Windows 8).
    Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:
    "The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP.
    Only thing that is plugged in my computer is mouse, keyboard and monitor.
    Many thanks,
    Matija

    Hi,
    PNP0A0A is not a default pnp ID, you need go to the manufacturer websites to find the ACPI driver, download and install it.
    Alex Zhao
    TechNet Community Support

  • HT1689 I forgot the answers for the questions that system answered me to confirm my purchase. It asking me because it's the first time that I'm purchasing using my IPad. Somebody could Help me?

    I forgot the answers for the questions that system answered me to confirm my purchase. It asking me because it's the first time that I'm purchasing using my IPad. Somebody could Help me?

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions

  • I bought a MacBook Pro I can not sign up for the updates, because I do not have credit card. Only own debit card, but the system does not accept. What can I do?

    I bought a MacBook Pro I can not sign up for the updates, because I do not have credit card. Only own debit card, but the system does not accept. What can I do?

    You do not need to "sign up" for downloading updates. Just run Software Update and let it access them directly thru the App Store.

  • I bought Logic Express in September for the $200 that Apple is now charging for Logic Pro. Anybody in the same boat? Is it worth another 2 bills for the the Pro? Is there any kind of "upgrade" pricing?  Thanks, all

    I bought Logic Express in September for the $200 that Apple is now charging for Logic Pro. Anybody in the same boat? Is it worth another 2 bills for the the Pro? Is there any kind of "upgrade" pricing?  Thanks, all

    CFRiverdog wrote:
    Is there any kind of "upgrade" pricing?
    Nope
    CCT

  • I have a serious idea for the future Operating System

    need to send me an email to ********* for speak to my idea of the future it's really seriously
    <E-mail Edited by Host>

    You are welcome to try, but this is typical for the industry (look at MicroSoft's policy, for example) - it is just a lawsuit waiting to happen, so eveyone avoids it.  If you think your idea is that good, develop it yourself, then see how much it is worth.

Maybe you are looking for