Logical System Name in SLD

Hi All,
I was going through the guide
https://websmp105.sap-ag.de/~sapdownload/011000358700001410142005E/Configure.pdf
for the configuration of IDOCS. In this document, they have asked to verify the name of Logical System in SLD. In SLD I cant find an entry for the field Logical SYSTEM(for my client xxx in R/3). Now I do not want to delete the existing bussiness system but edit it to contain the Logical System Name in it.
Pls help me out.
Thanks & Regards,
Jai Shankar.

Hi
- Go to Technical System in the SLD.
- Select the system you want to check
- Select the client number you want to check
Here you will find the Logical System Name

Similar Messages

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

SLD Logical System Name Changes not taking effect in IDOC

All -
I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
Thanks!

Hi Dennis,
After changing the logical system name in SLD have you done "Compare with SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
- Pinkle

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

IDOC sender: Error in Logical system name?

Hi,
In my current project, the IDOC sender system logical name is P2PCLNT100 but the SLD system name is P2P.
Its an IDOC to proxy scenario. At the receiver system side, the schemeAgencyID is getting populated at P2P and not P2PCLNT100, due to which there is an error on the receiver's side.
Following is already checked:
1. SLD has maintained the proper logical system name for the P2P system
2. The IDOC xml on the XI system has the sender port properly populated as P2PCLNT100
3. I have also debugged the program on the receiver side and fails at a point where it checks the logical system name from the database BBP_BACKEND_DEST.
On the receiver system, the followed error is shown as follows:
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system P2P is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 96</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
Thanks in advance for the useful answers.
Sowkhya

Hi,
1. R/3 system's logical system name and SLD business system's logical system name has the same.
Is there a need to have the business system name in SLD to have the same name as R/3 system logical name?? As far as my knowledge goes, business system and logical system need not have the same name. Correct me if in the case IDOC sender scenario is different..
2. SLDCHECK shows following message:
Summary: Connection to SLD does not work
The issue still persists. Will SLDCHECK correct solve the issue?
Regards,
Sowkhya

I need help in logical system name in business system

i created two business system with same logical system name and now am getting error in ID when i try to activate business system"" Logical system LSSUN already exists in service | BS_RCVESUN"" So,i again changed a logical system name in SLD and tried to activate it again but changes is not reflected back in ID.again it show logiacal system alredy exists.
pls giv me a steps to reflect changes back in ID.
thanks & Regards
Manikandan Shanmugam

open BS in edit mode,
choose from menu: Adepter Specific Identifiers
Here you push button: Compare SLD data
Save and activate

Logical system name in business system (SLD)

Hi,
While creating business system in SLD what should give for the logical system name?
Should the logical system name exists in ABAP stack or the new one?
Thanks.

Hi,
If you are creating the BS for SAP R/3 in SLD means we have to give the LS name which we had in SAP R/3( goto SALE and take the LS from there)
Goto Assign LS-----take the client which you are using for SAP R/3 and take the LS name assigned to that Client
Regards
Seshagiri

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Logical System Name 'WD_RFC_METADATA_DEST' is not properly defined in SLD

Hi,
Im getting this error message:
<h3>
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: 'WD_RFC_METADATA_DEST' not properly defined! Unable to create Metadata connection for Dictionary Provider. Either the logical System Name 'WD_RFC_METADATA_DEST' has not been properly defined in the System Landscape Directory, or you are not using a MsgServerDestination (AppServerDestinations are not permitted for Metadata connections)
</h3>
What action should I take to fix this error? is this a web dynpro side error or basis error?
Thanks!

Dear TJ Ronald Amorado
Please test the JCO destination for the model data and meta data which you are using in the webdynpro model.
As per the error message you are getting 'WD_RFC_METADATA_DEST' is not defined in the QA.
Please create it in the QA manually and test it. Refer to document : - [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Copy the name of the modeldata and metadata and use the same name in logical destination during model creation in webdynpro.
Hope it will helps.
Best Regards
Arun Jaiswal

Logical System and Logical System Name

Hi,
I would like to create the following and please tell me how do I go about doing this. I am doing this because I am trying to implement both RFC/Idoc to File and File to Idoc/RFC. The basis admin guys are unavailble at the moment so I am on my own at this moment.
Creating a port(I suppose I need to do this on the R3. What are the steps involved)
Create a Partner Profile

Hi Sonia,
For XI communicating with SAP R/3 through Idocs ALE settings need to be done,
just go through the following steps and Configure ALE :-
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Regards,
Ashwin M
Reward If helpful

JDBC to Idoc scenario - change of logical system name

Hi,
I have a JDBC to idoc scenario that worked. Now i had to change the logical system name from my sender system from ABC_123 into ABC123 in the SLD (Business System - Integration - Logical System name). I did so and also refreshed my Cache.
Afterwards I started the process, but it failed in the Receiver system. The idoc is correct expect of the partner name. My receiver system expect ABC123 - as I changed in the SLD - but PI send ABC_123.
If io look in SXI_CACHE - Services my Business System still got the "old" name (ABC_123).
Did i miss something resp. how can i load the current configuration from SLD?
Thanks in advance
Michael

Hi Michael,
Again Import the changed logical system in the Integration directory of you PI system.
And check the scenario (Sender Agreement, Receiver agreement ) what system they are reflecting.
If they are showing old system then you have to replace the business system in all the scenario.
Edited by: Rajhans Abhay on Jan 7, 2010 3:14 PM

Logical System Name is defined for which type of Business Sytem

hi
Can some one helps me on this question and explaination.
Logical System Name is defined for which type of Business Sytem ?
a.Third Party
b.Web AS java
c.WebAs abap
d.Standalone java
Thanks
Chandra

Hi ,
Logical System Name is defined for the Business System type WebAS ABAP.
It is used in ALE scenarios when exchanging IDOCs between the particular system and XI. The IDOC adapter will pick up the information from the SLD and it can then be used in the configuration in the Communication Channel (Adapter Specific Identifiers).
Refer to this How-To Guide for more info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Regards
Manish

Stuck with logical system name for JDBC Sender system!!!!!!!!!!!!!

Hi All,
I'm doing a scenario as JDBC2FILE.
I tried to add my jdbc sender system to SLD. So i created the technical system
now i'm creating business system...what should i give at logical system name tab? I've created tech system and business system as third party.
do we need logical system name in this scenario where we are not interacting with any R/3???
can anyone suggest the way to achieve this scenario?
Thanks in advance.....
Santhosh.

Hi Santhosh,
I just want to add ons..few more information which it might help you.
You no need to give logical system when you are using Thirdpaty.
Please check the below blog you will get more idea how to proceed to achieve the JDBC Scenario.
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
If you have any doubts while proceeding with your scenario plesae let me know..I will try my level best.
Thanks and Regards,
Chandu

Logical system name in the message

Hi,
I am sending a file from non SAP system to XI, which is than converted to Idocs and goes to a SAP system. Sender File system is created in SLD and a logical system name is assigned to it. My requirement is to know that logical system name during mapping. Can anybody guide me to find this in the incoming message.
Thanks !

Dehra,
Am not sure if this will help, but if you want, you can get the details like Sender Business System , sender Service etc in your mapping.
If this is what you want , take a look at this link,
http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm
Also, can you please elaborate on why you need to access this Logical Name from mapping? Just curious..!!
Regards,
Bhavesh

Where to define third party logical system name in file to idoc scenario

Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini Shah

Hi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Logical System Name in SLD

Similar Messages

Maybe you are looking for