Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

Similar Messages

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

Business system * is not assigned to a business system group

I am running XI3.0 (SP12), Oracle 9.2.0.6 on a Windows 2003 Cluster Server.
I am trying to import some config from the Integration Directory from Dev into QA but I am getting the following error:
<b>IMPORT XI 3.0 Design Objects
Business system XIT is not assigned to a business system group with the ID (XISystemGroup)</b>
I have copied my Dev SLD into my QA SLD.
Has anyone else come across the error??

Barry,
You should ideally have assigned Business systems in ur QA landscape to 1 group & Business systems in your dev landscape to another group. Also , hope you have created transport targets for all ur Business systems in dev environment.In ur QA SLD , you should have two entries for each business system , something like
DEV-BS-1 -> transport target -> QA-BS-1
QA-BS-1 -> transport source -> DEV-BS-1
Thanks
Saravana

Business system is not seen in new business system window

A Business system has been created by admin in SLD
now when I try to declare the same BS as business system(manually .. new > assign busines system), I dont see it in create business system window...
please help

try refresh "clear sld cache" from Environment tab in ID

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

System not assigned to any business system group

In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
Error message: " System SC1CLNT100 not assigned to any business system group".
When I received this error I created business system group in SLD and assigned my system to this new business system group.
Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
What should be done to make changes, which I made in SLD visible for the system?
Thank you in advance,
Kind regards,
Maria Kazakova

I assume you assigned this BSG in the IMG in APO
"As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Fetching the business system name during graphical mapping

Hi,
After the receiver determination is done and in interface determination, while executing the interface mapping, i need the business system name for which the
mapping is under progress. This i need during mapping.
Also, i need the configuration scenario name during mapping.
Is there any XI internal variable/system variables which hold these values so that using user defined function they can be accessed and used in graphical mapping ?
In appreciate your input in this regard.
Regards
Ganesh

Hi,
For the configuration name you can map it with a constant and for the sender,receiver services and interfaces you nee to use the UDF as one mentioned below.
Imports com.racs.gpt.*;
public String getMapValue(String a,String b,Container container)
//String a denotes incoming data string |data1|data2|data3|...|dataN.
//String b = lookupID.
//container contains runtime parameters.
AbstractTrace trace;
String headerField;
java.util.Map map;
String result;
trace = container.getTrace();
// get constant map
map = container.getTransformationParameters();
CrossReferenceAPI maprule1 = new CrossReferenceAPI();
result = maprule1.getData(a,b,map);
trace.addWarning("result = " + result);
if (result.equals("$NULL$"))
trace.addWarning("XREF Error. Mapped data for " + a + " not found");
ErrorHandler errHandler = new ErrorHandler();
int lookupID = Integer.parseInt(b);
errHandler.logSQLError(map, lookupID, a, "");
result = "?";
return result;
Regards
Madhu

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Last Approver name in not appearing in the shopping basket

Hi SRM Gurus,
We have Implemented N step Badi for our client .During Post Go Live we are facing this issue
We have created a shopping basket and there are 3 approvers to approve. After the first approvers is approved the name is not appearing in the Shopping basket.
We are in SRM 4.0
Can you tell what could be the reasons
G.Ganesh Kumar

Hi Ganesh,
How you fixed your problem ? Actually i am facing same problem for Bid invitation.
Regards
Abhijeet

New Hard disk is not appearing in the System Profiler

I am doing a fresh install using my ligitimate Snow Leopard DVD on my USB disk.
My SSD is not appearing in the System Profiler under Hardware>ATA
or under Hardware>Serial-ATA
It is a PATA device as was the original disk I've replaced.
So I have NO disk to install onto.
Any ideas what the problem could be?
===
History
My hard disk died, and I am replacing it with an SSD.
I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
(I can send this back if I have to)
The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
The SSD is preformatted (but not necessarily to Apple formatting).
With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
I cannot find any information as to which Pin on the original HDD is Pin 1.
I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
I've double checked the connections inside.

Thanks, this was the answer.
The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
I knew where Pin 1 was on the new SSD but could not see it on the old drive.
The original 80GB hard disk had Pin 1 is towards the middle of the computer.
Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
It is now working well.
(Although I now have a different problem restoring from the Time Machine. )

The business system HRK_005 is not a business system in the group assigned

Hi there,
i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
In this Szenario, there are XI and HR Systems included.
On Consolidation Side:
XIK_001
HRK_005
in Prod
XIP_001
HRP_001
When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
The business system HRK_005 is not a business system in the group assigned to production.
I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
Can someone help here?
Thanks
Bjoern

Oops i spoke with u r key code it bounced back .
Well i explained standard way to export and import Intergration Directory objects.
K - Development System ( SLD_Dev)
P - Production System (SLD _Prod)
In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
Assign all BS of K to Group1
Assign all BS of P tp Group2
For BS of K specify the target transport as Production BS (P).
Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
Now export from K (Dev) to P(prod)
am not able to view the link provided.
Any ways i have listed standard way for transport, hope this helps
Srini

Not able to see the Business systems

Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
Blue

Hi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi

Bootcamp disk icon does not appear in the System Preferences/Startup Disk. Any help ideas ?

Everything works fine but the Bootcamp disk icon does not appear in the System Preferences/Startup Disk.
When I am in Win7 I am easily rebooting my iMac by right-clicking on the Bootcamp icon.
When I am in Mac OS I wish to do same but that Bootcamp icon does not appear. Everytime I am restarting my iMac and pressing on the Option key to select the Windows disk.
Does anyone have an idea how to adjust to bring the Bootcamp icon to the Startup Disk panel ?

Use BootChamp instead; perhaps you have an NTFS 3rd party driver installed and has its own control panel.

Logical System Name Not appearing in the Business System

Similar Messages

Maybe you are looking for